git.gag.com Git - fw/cortex-toolchain/blob - summon-arm-toolchain

   1 #!/bin/bash
   2 # Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
   3 # Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
   4
   5 #
   6 # Requirements (example is for Debian, replace package names as needed):
   7 #
   8 # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
   9 # libmpc-dev autoconf texinfo build-essential
  10 #
  11 # Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
  12 #
  13
  14 # Stop if any command fails
  15 set -e
  16
  17 ##############################################################################
  18 # Settings section
  19 # You probably want to customize those
  20 ##############################################################################
  21 TARGET=arm-none-eabi            # Or: TARGET=arm-elf
  22 PREFIX=${HOME}/sat      # Install location of your final toolchain
  23 DARWIN_OPT_PATH=/opt/local      # Path in which MacPorts or Fink is installed
  24 # Set to 'sudo' if you need superuser privileges while installing
  25 SUDO=
  26 # Set to 1 to be quieter while running
  27 QUIET=0
  28 # Set to 1 to use linaro gcc instead of the FSF gcc
  29 USE_LINARO=1
  30 # Set to 1 to enable building of OpenOCD
  31 OOCD_EN=1
  32 # Set to 1 to build libstm32 provided by ST
  33 LIBSTM32_EN=0
  34 # Set to 1 to build libopenstm32 an open source library for stm32
  35 LIBOPENSTM32_EN=1
  36 # Make the gcc default to Cortex-M3
  37 DEFAULT_TO_CORTEX_M3=0
  38
  39 ##############################################################################
  40 # Version and download url settings section
  41 ##############################################################################
  42 if [ ${USE_LINARO} == 0 ] ; then
  43         # For FSF GCC:
  44         GCCVERSION=4.5.1
  45         GCC=gcc-${GCCVERSION}
  46         GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
  47 else
  48         # For the Linaro GCC:
  49         GCCRELEASE=4.5-2010.11-0
  50         GCCVERSION=4.5-2010.11-1
  51         GCC=gcc-linaro-${GCCVERSION}
  52         GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
  53 fi
  54
  55 BINUTILS=binutils-2.20
  56 NEWLIB=newlib-1.18.0
  57 GDB=gdb-7.2
  58 OOCD=master
  59 LIBCMSIS=v1.10-2
  60 LIBSTM32=v3.0.0-1
  61 LIBSTM32USB=v3.0.1-1
  62 LIBOPENSTM32=master
  63
  64 ##############################################################################
  65 # Flags section
  66 ##############################################################################
  67
  68 if which getconf > /dev/null; then
  69         CPUS=$(getconf _NPROCESSORS_ONLN)
  70 else
  71         CPUS=1
  72 fi
  73 PARALLEL=-j$((CPUS + 1))
  74 echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
  75
  76 GDBFLAGS=
  77 BINUTILFLAGS=
  78
  79 if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
  80         GCCFLAGS=
  81 else
  82         # To default to the Cortex-M3:
  83         GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft"
  84 fi
  85
  86 # Pull in the local configuration, if any
  87 if [ -f local.sh ]; then
  88     . ./local.sh
  89 fi
  90
  91 MAKEFLAGS=${PARALLEL}
  92 TARFLAGS=v
  93
  94 if [ ${QUIET} != 0 ]; then
  95     TARFLAGS=
  96     MAKEFLAGS="${MAKEFLAGS} -s"
  97 fi
  98
  99 export PATH="${PREFIX}/bin:${PATH}"
 100
 101 SUMMON_DIR=$(pwd)
 102 SOURCES=${SUMMON_DIR}/sources
 103 STAMPS=${SUMMON_DIR}/stamps
 104
 105
 106 ##############################################################################
 107 # Tool section
 108 ##############################################################################
 109 TAR=tar
 110
 111 ##############################################################################
 112 # OS and Tooldetection section
 113 # Detects which tools and flags to use
 114 ##############################################################################
 115
 116 case "$(uname)" in
 117         Linux)
 118         echo "Found Linux OS."
 119         ;;
 120         Darwin)
 121         echo "Found Darwin OS."
 122         GCCFLAGS="${GCCFLAGS} \
 123                   --with-gmp=${DARWIN_OPT_PATH} \
 124                   --with-mpfr=${DARWIN_OPT_PATH} \
 125                   --with-mpc=${DARWIN_OPT_PATH} \
 126                   -with-libiconv-prefix=${DARWIN_OPT_PATH}"
 127         OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
 128         OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
 129         ;;
 130         CYGWIN*)
 131         echo "Found CygWin that means Windows most likely."
 132         ;;
 133         *)
 134         echo "Found unknown OS. Aborting!"
 135         exit 1
 136         ;;
 137 esac
 138
 139 ##############################################################################
 140 # Building section
 141 # You probably don't have to touch anything after this
 142 ##############################################################################
 143
 144 # Fetch a versioned file from a URL
 145 function fetch {
 146     if [ ! -e ${STAMPS}/$1.fetch ]; then
 147         log "Downloading $1 sources..."
 148         wget -c --no-passive-ftp $2
 149         touch ${STAMPS}/$1.fetch
 150     fi
 151 }
 152
 153 # Log a message out to the console
 154 function log {
 155     echo "******************************************************************"
 156     echo "* $*"
 157     echo "******************************************************************"
 158 }
 159
 160 # Unpack an archive
 161 function unpack {
 162     log Unpacking $*
 163     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a
 164     ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
 165     case ${ARCHIVE} in
 166         *.bz2)
 167             echo "archive type bz2"
 168             TYPE=j
 169             ;;
 170         *.gz)
 171             echo "archive type gz"
 172             TYPE=z
 173             ;;
 174         *)
 175             echo "Unknown archive type of $1"
 176             echo ${ARCHIVE}
 177             exit 1
 178             ;;
 179     esac
 180     ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
 181 }
 182
 183 # Install a build
 184 function install {
 185     log $1
 186     ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
 187 }
 188
 189
 190 mkdir -p ${STAMPS} ${SOURCES}
 191
 192 cd ${SOURCES}
 193
 194 fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
 195 fetch ${GCC} ${GCCURL}
 196 fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 197 fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 198
 199 if [ ${OOCD_EN} != 0 ]; then
 200 if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
 201         log "Cloning OpenOCD sources..."
 202         git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
 203         cd openocd-${OOCD}
 204         ./bootstrap
 205         cd ..
 206         tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
 207         #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
 208         #    bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
 209         rm -rf openocd-${OOCD}
 210 fi
 211 fi
 212
 213 if [ ${LIBSTM32_EN} != 0 ]; then
 214 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
 215         log "Cloning libcmsis sources..."
 216         git clone git://git.open-bldc.org/libcmsis.git
 217         cd libcmsis
 218         git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
 219             bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2
 220         cd ..
 221         rm -rf libcmsis
 222 fi
 223
 224 if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
 225         log "Cloning libstm32 sources..."
 226         git clone git://git.open-bldc.org/libstm32.git
 227         cd libstm32
 228         git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
 229             bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2
 230         cd ..
 231         rm -rf libstm32
 232 fi
 233
 234 if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
 235         log "Cloning libstm32usb sources..."
 236         git clone git://git.open-bldc.org/libstm32usb.git
 237         cd libstm32usb
 238         git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
 239             bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2
 240         cd ..
 241         rm -rf libstm32usb
 242 fi
 243 fi
 244
 245 if [ ${LIBOPENSTM32_EN} != 0 ]; then
 246 if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
 247         log "Cloning libopenstm32 sources..."
 248         git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
 249         cd libopenstm32
 250         git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
 251             bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
 252         cd ..
 253         rm -rf libopenstm32
 254 fi
 255 fi
 256
 257 cd ${SUMMON_DIR}
 258
 259 if [ ! -e build ]; then
 260     mkdir build
 261 fi
 262
 263 if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
 264     unpack ${BINUTILS}
 265     cd build
 266     log "Configuring ${BINUTILS}"
 267     ../${BINUTILS}/configure --target=${TARGET} \
 268                            --prefix=${PREFIX} \
 269                            --enable-interwork \
 270                            --enable-multilib \
 271                            --with-gnu-as \
 272                            --with-gnu-ld \
 273                            --disable-nls \
 274                            --disable-werror \
 275                            ${BINUTILFLAGS}
 276     log "Building ${BINUTILS}"
 277     make ${MAKEFLAGS}
 278     install ${BINUTILS} install
 279     cd ..
 280     log "Cleaning up ${BINUTILS}"
 281     touch ${STAMPS}/${BINUTILS}.build
 282     rm -rf build/* ${BINUTILS}
 283 fi
 284
 285 if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
 286     unpack ${GCC} boot
 287     cd build
 288     log "Configuring ${GCC}-boot"
 289     ../${GCC}/configure --target=${TARGET} \
 290                       --prefix=${PREFIX} \
 291                       --enable-interwork \
 292                       --enable-multilib \
 293                       --enable-languages="c" \
 294                       --with-newlib \
 295                       --without-headers \
 296                       --disable-shared \
 297                       --with-gnu-as \
 298                       --with-gnu-ld \
 299                       --disable-nls \
 300                       --disable-werror \
 301                       --with-system-zlib \
 302                       ${GCCFLAGS}
 303     log "Building ${GCC}-boot"
 304     make ${MAKEFLAGS} all-gcc
 305     install ${GCC}-boot install-gcc
 306     cd ..
 307     log "Cleaning up ${GCC}-boot"
 308     touch ${STAMPS}/${GCC}-boot.build
 309     rm -rf build/* ${GCC}
 310 fi
 311
 312 if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
 313     unpack ${NEWLIB}
 314     cd build
 315     log "Configuring ${NEWLIB}"
 316     ../${NEWLIB}/configure --target=${TARGET} \
 317                          --prefix=${PREFIX} \
 318                          --enable-interwork \
 319                          --enable-multilib \
 320                          --with-gnu-as \
 321                          --with-gnu-ld \
 322                          --disable-nls \
 323                          --disable-werror \
 324                          --disable-newlib-supplied-syscalls \
 325                          --with-float=soft
 326     log "Building ${NEWLIB}"
 327     make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"
 328     install ${NEWLIB} install
 329     cd ..
 330     log "Cleaning up ${NEWLIB}"
 331     touch ${STAMPS}/${NEWLIB}.build
 332     rm -rf build/* ${NEWLIB}
 333 fi
 334
 335 # Yes, you need to build gcc again!
 336 if [ ! -e ${STAMPS}/${GCC}.build ]; then
 337     unpack ${GCC}
 338     cd build
 339     log "Configuring ${GCC}"
 340     ../${GCC}/configure --target=${TARGET} \
 341                       --prefix=${PREFIX} \
 342                       --enable-interwork \
 343                       --enable-multilib \
 344                       --enable-languages="c,c++" \
 345                       --with-newlib \
 346                       --disable-shared \
 347                       --with-gnu-as \
 348                       --with-gnu-ld \
 349                       --disable-nls \
 350                       --disable-werror \
 351                       --with-system-zlib \
 352                      ${GCCFLAGS}
 353     log "Building ${GCC}"
 354     make ${MAKEFLAGS}
 355     install ${GCC} install
 356     cd ..
 357     log "Cleaning up ${GCC}"
 358     touch ${STAMPS}/${GCC}.build
 359     rm -rf build/* ${GCC}
 360 fi
 361
 362 if [ ! -e ${STAMPS}/${GDB}.build ]; then
 363     unpack ${GDB}
 364     cd build
 365     log "Configuring ${GDB}"
 366     ../${GDB}/configure --target=${TARGET} \
 367                       --prefix=${PREFIX} \
 368                       --enable-interwork \
 369                       --enable-multilib \
 370                       --disable-werror \
 371                       ${GDBFLAGS}
 372     log "Building ${GDB}"
 373     make ${MAKEFLAGS}
 374     install ${GDB} install
 375     cd ..
 376     log "Cleaning up ${GDB}"
 377     touch ${STAMPS}/${GDB}.build
 378     rm -rf build/* ${GDB}
 379 fi
 380
 381 if [ ${OOCD_EN} != 0 ]; then
 382 if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
 383     unpack openocd-${OOCD}
 384     cd build
 385     log "Configuring openocd-${OOCD}"
 386     export CFLAGS="${OOCD_CFLAGS}"
 387     export LDFLAGS="${OOCD_LDFLAGS}"
 388     ../openocd-${OOCD}/configure --enable-maintainer-mode \
 389                       --prefix=${PREFIX} \
 390                       --enable-dummy \
 391                       --enable-parport \
 392                       --enable-ft2232_libftdi \
 393                       --enable-usb_blaster_libftdi \
 394                       --enable-amtjtagaccel \
 395                       --enable-zy1000 \
 396                       --enable-ep93xx \
 397                       --enable-at91rm9200 \
 398                       --enable-gw16012 \
 399                       --enable-presto_libftdi \
 400                       --enable-usbprog \
 401                       --enable-jlink \
 402                       --enable-vsllink \
 403                       --enable-rlink \
 404                       --enable-arm-jtag-ew \
 405                       --enable-buspirate
 406     log "Building openocd-${OOCD}"
 407     make ${MAKEFLAGS}
 408     install openocd-${OOCD} install
 409     cd ..
 410     log "Cleaning up openocd-${OOCD}"
 411     touch ${STAMPS}/openocd-${OOCD}.build
 412     rm -rf build/* ${OOCD}
 413 fi
 414 fi
 415
 416 if [ ${LIBSTM32_EN} != 0 ]; then
 417 if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
 418     unpack libcmsis-${LIBCMSIS}
 419     cd libcmsis-${LIBCMSIS}
 420     log "Building libcmsis-${LIBCMSIS}"
 421     make arch_prefix=${TARGET} prefix=${PREFIX}
 422     install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
 423     cd ..
 424     log "Cleaning up libcmsis-${LIBCMSIS}"
 425     touch ${STAMPS}/libcmsis-${LIBCMSIS}.build
 426     rm -rf libcmsis-${LIBCMSIS}
 427 fi
 428
 429 if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then
 430     unpack libstm32-${LIBSTM32}
 431     cd libstm32-${LIBSTM32}
 432     log "Building libstm32-${LIBSTM32}"
 433     make arch_prefix=${TARGET} prefix=${PREFIX}
 434     install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
 435     cd ..
 436     log "Cleaning up libstm32-${LIBSTM32}"
 437     touch ${STAMPS}/libstm32-${LIBSTM32}.build
 438     rm -rf libstm32-${LIBSTM32}
 439 fi
 440
 441 if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then
 442     unpack libstm32usb-${LIBSTM32USB}
 443     cd libstm32usb-${LIBSTM32USB}
 444     log "Building libstm32usb-${LIBSTM32USB}"
 445     make arch_prefix=${TARGET} prefix=${PREFIX}
 446     install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
 447     cd ..
 448     log "Cleaning up libstm32usb-${LIBSTM32USB}"
 449     touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build
 450     rm -rf libstm32usb-${LIBSTM32USB}
 451 fi
 452 fi
 453
 454 if [ $LIBOPENSTM32_EN != 0 ]; then
 455 if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then
 456     unpack libopenstm32-${LIBOPENSTM32}
 457     cd libopenstm32-${LIBOPENSTM32}
 458     log "Building libopenstm32-${LIBOPENSTM32}"
 459     make PREFIX=${TARGET} DESTDIR=${PREFIX}
 460     install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
 461     cd ..
 462     log "Cleaning up libopenstm32-${LIBOPENSTM32}"
 463     touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build
 464     rm -rf libopenstm32-${LIBOPENSTM32}
 465 fi
 466 fi