| 2009-05-17 |
Keith Packard | Add pad lat/lon, max accel, max height
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Clean up GPS display
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Make aoview window taller
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Add lots more aoview UI bits
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | When logging starts up, right the whole ring to the...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Abandon use of accelerometer for apogee detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-16 |
Keith Packard | Add preliminary aoview code
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Discard usb output before connection. Handle USB reset.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Enable radio monitor by default in teleterra, teledongle...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Remove monitor/rssi functions from telemetrum load
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Split out ao_state_names to separate file
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Indicate RSSI with a blinking LED
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Make ao_flight_test show AGL altitude and positive...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Make ao_flight_test able to read raw logging data
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Print only RSSI when packet CRC is invalid
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Accelerometer-based velocity values are invalid after...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Add velocity check for boost detect via accelerometer
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-13 |
Keith Packard | Typo in callsign
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Use recorded accelerometer baseline data in ao_flight_test
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Don't re-initialize the landing range data at each...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Initialize ao_min_vel with |ao_flight_vel|
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Decrease telemetry rate on the pad to 1/sec instead...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Increase the initial accel/baro average to 1000 samples
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-11 |
Keith Packard | Record average accelerometer value in flight start...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-09 |
Keith Packard | Add version command to show product information
|
commit | commitdiff | tree |
| 2009-05-09 |
Keith Packard | Pad callsign with nuls
|
commit | commitdiff | tree |
| 2009-05-01 |
Keith Packard | USB spec limits bulk endpoints to 64 byte payload max.
|
commit | commitdiff | tree |
| 2009-04-30 |
Keith Packard | Use 'char' instead of 'uint8_t' for character data
|
commit | commitdiff | tree |
| 2009-04-30 |
Keith Packard | Eliminate incorrect cast in printf string argument
|
commit | commitdiff | tree |
| 2009-04-30 |
Keith Packard | Correct radio frequency shown in config display.
|
commit | commitdiff | tree |
| 2009-04-30 |
Keith Packard | Reset landing interval tests at apogee
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Was missing v_batt in adc dump command
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Add manual ignition and igniter test commands
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Clean up commands a bit
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Clear more files on make clean
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Label binaries with product and serial info
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Make sure full log is written and flushed on landing.
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Clean up monitor output a bit
|
commit | commitdiff | tree |
| 2009-04-26 |
Keith Packard | Add configuration support
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Allow for slower ADC operation. Add power saving code.
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Allow ADC to be disabled
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Place CPU in P0 state while idle
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Add RDF beacon and callsign to telemetry
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Add radio code to emit a 1kHz tone
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Allow the USB system to be disabled/enabled at run...
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Make LED usage depend on target device
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Make some functions reentrant to save DSEG space
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Add monitor task to flight software
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Report difference from ground to max altitude at landing
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Display data with units while running simulation
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Enabling apogee detect via speed: < 200m/s && < max_speed...
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | configure igniter ports, set values to measured ones
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Move ao_led_init to end of file to be consistent with...
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Define ao_state_names in ao.h so other people can share
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Bump NUM_CMDS to 10
|
commit | commitdiff | tree |
| 2009-04-25 |
Keith Packard | Move beep_init to end of file to be consistent with...
|
commit | commitdiff | tree |
| 2009-04-24 |
Keith Packard | Update flight algorithm based on data collected from...
|
commit | commitdiff | tree |
| 2009-04-24 |
Keith Packard | Add igniters and update flight control algorithm
|
commit | commitdiff | tree |
| 2009-04-24 |
Keith Packard | Avoid ram from 0xfda2 through feff, its funky
|
commit | commitdiff | tree |
| 2009-04-24 |
Keith Packard | remove ao_flight_test until its ready
|
commit | commitdiff | tree |
| 2009-04-24 |
Keith Packard | Add teledongle module
|
commit | commitdiff | tree |
| 2009-04-23 |
Keith Packard | Set telemetry rate to 100ms
|
commit | commitdiff | tree |
| 2009-04-23 |
Keith Packard | Wrong license on ao_monitor.c
|
commit | commitdiff | tree |
| 2009-04-23 |
Keith Packard | Crank up radio to 10dBm
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Add COPYING file
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Clean up TeleTerra files
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | simplify ao_time function
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | One line radio status
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Add new binaries to .gitignore
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Speed up dbg port bit frobbing
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Use sdcc from path
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Clean up task list formatting
|
commit | commitdiff | tree |
| 2009-04-22 |
Keith Packard | Control radio monitoring with the M command
|
commit | commitdiff | tree |
| 2009-04-21 |
Keith Packard | Clean up telemetry now that all packets are the same
|
commit | commitdiff | tree |
| 2009-04-21 |
Keith Packard | Add longer debug delays to reset/debug_mode entry
|
commit | commitdiff | tree |
| 2009-04-21 |
Keith Packard | Fix up fancy dbg stuff. Add teleterra initial bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-21 |
Keith Packard | Add radio support. Build separate executables for TeleMetrum...
|
commit | commitdiff | tree |
| 2009-04-19 |
Keith Packard | Start using pdata area for less-frequently used data
|
commit | commitdiff | tree |
| 2009-04-19 |
Keith Packard | Slow down panic presentation
|
commit | commitdiff | tree |
| 2009-04-19 |
Keith Packard | Parse GPS data locally. Add 'g' command to display...
|
commit | commitdiff | tree |
| 2009-04-19 |
Keith Packard | Add task names and 'T' command to show task status.
|
commit | commitdiff | tree |
| 2009-04-19 |
Keith Packard | Fix GPL version at 2
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-18 |
Keith Packard | Add gps, debug dongle support and pressure alt tables
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Move a bunch of variables from __data to __xdata
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Slow down panic code, disable interrupts
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Keep reporting flight state while it changes
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | use red LED to indicate system startup
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Use ao_ee_flush_internal while holding mutex
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Leave beeping and lights to the flight code
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Make mutex functions reentrant
|
commit | commitdiff | tree |
| 2009-04-15 |
Keith Packard | Add in existing flight pieces: flight/report/log
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | Add eeprom driver and command loop
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | Switch from --model-large to --model-small
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | Add comments, clean up white space, etc.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | Switch USB to double-buffered
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | Fix USB input/output by reloading packet limits.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-14 |
Keith Packard | USB working up through reading strings
|
commit | commitdiff | tree |
| 2009-04-13 |
Keith Packard | Add USB support.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-13 |
Keith Packard | Add beep/led support.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-04-13 |
Keith Packard | Add A/D sampler
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| next |
projects / fw / altos / search