| 2009-09-04 |
Keith Packard | Move usb scanning code to ao-tools library
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-04 |
Keith Packard | Set all of the values to reset the radio for telemetry
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-04 |
Keith Packard | Make RDF beacon only run on pad and after landing.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-04 |
Keith Packard | Add back the RDF tone generator
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-03 |
Keith Packard | Remove bit-banging debug support from TM board builds
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-03 |
Keith Packard | Make the ao_log_record structures 8 bytes again.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-09-03 |
Keith Packard | Make eeprom reads and writes across block boundary...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-22 |
Keith Packard | Enable GPS degraded mode, set 10 sec degraded timeout.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-21 |
Keith Packard | Turn off GPS tracking data when not present in data...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-19 |
Keith Packard | Update ao-view to add GPS satellite tracking data
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-19 |
Keith Packard | Handle GPS satellite tracking data
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-19 |
Keith Packard | Add ao-ejection.1 man page
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-19 |
Keith Packard | Create ChangeLog from git log
|
commit | commitdiff | tree |
| 2009-08-19 |
Keith Packard | Fix ao-bitbang examples to not have . in the first...
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Add manual pages for remaining commands.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Use --tty/-T on command line to specify target device
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Rename tools to ao-<foo>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | re-add debugger sources
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Start working on using getopt for the tty name
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Rename tools to ao-<foo>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | Remove unused cctools code paths for old libusb and...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-18 |
Keith Packard | test for sdcc, nickle and readline
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-10 |
Keith Packard | Sync USB data after each memory write command
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-09 |
Keith Packard | Handle partial ALSA PCM writes
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-08-09 |
Keith Packard | Check more alsa return statuses
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Don't report distance to rocket without valid GPS
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Add B command to set serial baud rate
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Get rid of spaces after minus sign in climb value
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Switch to 57600 baud for GPS data
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Drain serial port before changing speed
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Display last known GPS coord while unlocked
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | use g_source_destroy instead of free on serial object
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Trim aoview_serial_set_callback args down to just port...
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Reset GPS at boot time
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Fix up serial debug output
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Allow the GPS port to run at 4800 baud if desired
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Initialize the GPS serial protocol state
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Use uint8_t for comparisons to avoid int conversions
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Add AO_GPS_RUNNING state.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Add M command to monitor serial bytes
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Support the not-connected GPS state
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Use 57600 baud for GPS. Clean up gps init.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Try harder to get the GPS receiver serial link sync...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-18 |
Keith Packard | Rolling average for pad location. Say 'GPS ready'.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-17 |
Keith Packard | Split GPS data into a separate column
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-17 |
Keith Packard | Fix up SiRF parsing and test code so that it actually...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-17 |
Keith Packard | Add host-side gps protocol testing program
|
commit | commitdiff | tree |
| 2009-07-11 |
Keith Packard | Hook aoview directly to alsa
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-10 |
Keith Packard | Show speed. Format numbers. Timeout and report final...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-07-05 |
Keith Packard | Dont smash aoview_monitor_parse input buffer
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Integrate flite into aoview directly. Fix great circle...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Make window taller
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Use 16kHz voice
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Add telem replay and larger labels
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Update aoview/.gitignore
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Use flite to announce flight state
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-30 |
Keith Packard | Add GPS speed and error data to telemetry and aoview
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-29 |
Keith Packard | Convert GPS to SiRF binary protocol.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-18 |
Keith Packard | Add ejection computation utility
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-17 |
Keith Packard | Fix clock initialization to not try to use 32kHz xtal...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-15 |
Keith Packard | Some kernels reference USB ttys as tty/tty* instead...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-14 |
Keith Packard | Rename state apogee -> coast
|
commit | commitdiff | tree |
| 2009-06-14 |
Keith Packard | rename states. launchpad -> pad, coast -> fast
|
commit | commitdiff | tree |
| 2009-06-14 |
Keith Packard | Disable monitor mode when communicating via usb
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | Format GPS seconds as %02d.%04d to avoid spaces in...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | Move build and debug tools to 'cctools' directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | Merge ccdbg and altos sources into one giant repository
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | Use autotools, move altos to src subdir
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | Make menu seperator insensitive
|
commit | commitdiff | tree |
| 2009-06-04 |
Keith Packard | aoview: Add eeprom data fetching
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-06-03 |
Keith Packard | Stop log dumping at flight end. Print 'end' at end...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-31 |
Keith Packard | Start adding bi-directional packet link
|
commit | commitdiff | tree |
| 2009-05-29 |
Keith Packard | Eliminate RDF tone generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-29 |
Keith Packard | Change .gitignore to match new aoload procedure
|
commit | commitdiff | tree |
| 2009-05-28 |
Keith Packard | Leave serial number writing to aoload
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-28 |
Keith Packard | Add aoload to load serial-numbered altos binaries.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-24 |
Keith Packard | Fix aoview telemetry GPS parsing code to use correct...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-24 |
Keith Packard | Parse both telemetry or log data ao_flight_test
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-24 |
Keith Packard | Avoid 16-bit overflow in velocity computation.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-20 |
Keith Packard | Make file handling more general so it can be reused.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Ignore aoview_glade.h
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Transmit computed ground pressure and acceleration...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Provide install target
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Embed glade file in executable
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Add About dialog to aoview.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | USB device names can contain '.' too
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | scandir returns -1 on error
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Send computed accel/vel/pres values over the radio
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | Handle disappearing serial devices
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-18 |
Keith Packard | While on the pad, zero out velocity every second
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Clear table, reset log on disconnect
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Add pad lat/lon, max accel, max height
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Clean up GPS display
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Make aoview window taller
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Add lots more aoview UI bits
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | When logging starts up, right the whole ring to the...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-17 |
Keith Packard | Abandon use of accelerometer for apogee detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-16 |
Keith Packard | Add preliminary aoview code
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Discard usb output before connection. Handle USB reset.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| 2009-05-14 |
Keith Packard | Enable radio monitor by default in teleterra, teledongle...
Signed-off-by: Keith Packard <keithp@keithp.com>
|
commit | commitdiff | tree |
| next |
projects / fw / altos / search