From 1cb529e0532d0a7430487c856bb9b037ff6cea0f Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Wed, 23 Oct 2019 10:41:30 -0600 Subject: [PATCH] doc: add some text to TeleLaunch troubleshooting about SAFE/ARM on TeleFire --- doc/telelaunch-troubleshooting.inc | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/doc/telelaunch-troubleshooting.inc b/doc/telelaunch-troubleshooting.inc index 25c0b819..aa25008d 100644 --- a/doc/telelaunch-troubleshooting.inc +++ b/doc/telelaunch-troubleshooting.inc @@ -1,6 +1,16 @@ [appendix] == Troubleshooting + === TeleFire Fails to Arm + + If turning the TeleLCO key switch from "SAFE" to "ARM" does + not cause the selected TeleFire box to start flashing and + sounding its siren, the most likely cause is that the + TeleFire box was left with the local safe/arm switch in the + safe position. The Remote Arm LED on TeleLCO shows the state + of the safe/arm switch on the currently selected TeleFire box + and can be used to confirm this situation. + === Radio Signal Strength Each unit in the TeleLaunch system has a debugging feature -- 2.30.2