From e0e98597887a970f31b33895adb77d35e06b34ff Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Thu, 10 Oct 2013 14:35:54 -0700 Subject: [PATCH] updated turn-on script for telebt 1.1 --- ao-bringup/turnon_telebt | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/ao-bringup/turnon_telebt b/ao-bringup/turnon_telebt index 6c52721c..ef20e915 100755 --- a/ao-bringup/turnon_telebt +++ b/ao-bringup/turnon_telebt @@ -1,5 +1,8 @@ #!/bin/sh +# serial number of the TeleDongle being used as the flash programmer +DONGLE=612 + if [ -x ../ao-tools/ao-load/ao-load ]; then AOLOAD=../ao-tools/ao-load/ao-load elif [ -x /usr/bin/ao-load ]; then @@ -18,12 +21,12 @@ else exit 1 fi -echo "TeleBT v0.1 Turn-On and Calibration Program" -echo "Copyright 2011 by Bdale Garbee. Released under GPL v2" +echo "TeleBT v1.1 Turn-On and Calibration Program" +echo "Copyright 2013 by Bdale Garbee. Released under GPL v2" echo echo "Expectations:" -echo "\tTeleBT v0.1 powered from USB" -echo "\t\twith TeleDonle (on /dev/ttyACM0) cabled to debug header" +echo "\tTeleBT v1.1 powered from USB" +echo "\t\twith TeleDonlge (on /dev/ttyACM0) cabled to debug header" echo "\t\twith coax from SMA to frequency counter" echo echo -n "TeleBT serial number: " @@ -31,18 +34,18 @@ read SERIAL echo $RAWLOAD -$RAWLOAD -D 100 -r ao_led_blink.ihx +$RAWLOAD -D $DONGLE -r ao_led_blink.ihx echo "LEDs should be blinking" sleep 5 -$RAWLOAD -D 100 -r ao_radio_xmit.ihx +$RAWLOAD -D $DONGLE -r ao_radio_xmit.ihx echo -n "Generating RF carrier. Please enter measured frequency: " read FREQ CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` echo "Programming flash with cal value " $CAL_VALUE -$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/telebt-v0.1*.ihx $SERIAL +$AOLOAD -D $DONGLE --cal $CAL_VALUE /usr/share/altos/stable/telebt-v1.0*.ihx $SERIAL echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE echo "Unplug debug cable, power cycle, cu to the board, confirm freq and record power" -- 2.30.2