From c58f3d1a373b20fac3f51037008bcc40955f1348 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 7 Aug 2012 11:30:47 -0700 Subject: [PATCH] altos: Oops. Serial 1 stdin was busted by typo A typo in the symbol used to enable stdin wakeups from serial1 caused the input to pend until some other wakeup occurred. This also makes the serial1 hw flow control pin selects in config 2 work right, although those aren't used by any current product Signed-off-by: Keith Packard --- src/cc1111/ao_serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/cc1111/ao_serial.c b/src/cc1111/ao_serial.c index d5431070..48383802 100644 --- a/src/cc1111/ao_serial.c +++ b/src/cc1111/ao_serial.c @@ -135,7 +135,7 @@ ao_serial1_rx_isr(void) __interrupt 3 if (!ao_fifo_full(ao_serial1_rx_fifo)) ao_fifo_insert(ao_serial1_rx_fifo, U1DBUF); ao_wakeup(&ao_serial1_rx_fifo); -#if USE_SERIAL1_STDIN +#if USE_SERIAL_1_STDIN ao_wakeup(&ao_stdin_ready); #endif } @@ -292,7 +292,9 @@ ao_serial_init(void) /* Make the USART pins be controlled by the USART */ P1SEL |= (1 << 6) | (1 << 7); +#if HAS_SERIAL_1_HW_FLOW P1SEL |= (1 << 5) | (1 << 4); +#endif #endif /* UART mode with receiver enabled */ -- 2.30.2