From 91b1a80650a7dcd7c5bf819618a8cea0fceb37d9 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sun, 8 Feb 2015 09:29:01 -0700 Subject: [PATCH] swap names so v3.0 is the default TeleDongle version to turn on --- ao-bringup/turnon_teledongle | 99 ++++++++++++++++++++----------- ao-bringup/turnon_teledongle_v0.2 | 58 ++++++++++++++++++ ao-bringup/turnon_teledonglev3 | 89 --------------------------- 3 files changed, 123 insertions(+), 123 deletions(-) create mode 100755 ao-bringup/turnon_teledongle_v0.2 delete mode 100755 ao-bringup/turnon_teledonglev3 diff --git a/ao-bringup/turnon_teledongle b/ao-bringup/turnon_teledongle index 058e72ce..e6750c45 100755 --- a/ao-bringup/turnon_teledongle +++ b/ao-bringup/turnon_teledongle @@ -1,58 +1,89 @@ #!/bin/sh -if [ -x ../ao-tools/ao-load/ao-load ]; then - AOLOAD=../ao-tools/ao-load/ao-load -elif [ -x /usr/bin/ao-load ]; then - AOLOAD=/usr/bin/ao-load +if [ -x ../ao-tools/ao-flash/ao-flash-lpc ]; then + FLASH_LPC=../ao-tools/ao-flash/ao-flash-lpc +elif [ -x /usr/bin/ao-flash-lpc ]; then + FLASH_LPC=/usr/bin/ao-flash-lpc else - echo "Can't find ao-load! Aborting." + echo "Can't find ao-flash-lpc! Aborting." exit 1 fi -if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then - RAWLOAD=../ao-tools/ao-rawload/ao-rawload -elif [ -x /usr/bin/ao-rawload ]; then - RAWLOAD=/usr/bin/ao-rawload +if [ -x /usr/bin/ao-usbload ]; then + USBLOAD=/usr/bin/ao-usbload else - echo "Can't find ao-rawload! Aborting." + echo "Can't find ao-usbload! Aborting." exit 1 fi -echo "TeleDongle v0.2 Turn-On and Calibration Program" -echo "Copyright 2010 by Bdale Garbee. Released under GPL v2" +PRODUCT=teledongle +PRODUCT_NAME=TeleDongle +VERSION=3.0 + +echo "$PRODUCT_NAME v$VERSION Turn-On and Calibration Program" +echo "Copyright © 2015 by Bdale Garbee. Released under GPL v2" echo echo "Expectations:" -echo "\tTeleDongle v0.2 powered from USB" -echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header" -echo "\t\twith coax from SMA to frequency counter" +echo "\t$PRODUCT_NAME v$VERSION powered from USB" +echo "\t\twith ST-Link-V2 cabled to debug header" +echo "\t\twith coax from UHF to frequency counter" echo -echo -n "TeleDongle serial number: " +echo -n "$PRODUCT_NAME-$VERSION serial number: " read SERIAL -echo $RAWLOAD +BINARIES=$HOME/altusmetrumllc/Binaries + +LOADER="$BINARIES/loaders/$PRODUCT-v$VERSION-"*.elf +ALTOS="$BINARIES/$PRODUCT-v$VERSION"*.elf + +$FLASH_LPC $LOADER || exit 1 -case $USER in - bdale) - programmer=100 +sleep 2 + +$USBLOAD --serial=$SERIAL $ALTOS || exit 1 + +sleep 5 + +dev=`ao-list | awk '/TeleDongle-v'"$VERSION"'/ { print $3; exit(0); }'` + +case "$dev" in +/dev/tty*) + echo "TeleDongle found on $dev" ;; - keithp) - programmer=186 +*) + echo 'No TeleDongle-v'"$VERSION"' found' + exit 1 ;; esac -$RAWLOAD -D $programmer -r ao_led_blink.ihx -echo "LEDs should be blinking" -sleep 5 +echo 'E 0' > $dev + +./cal-freq-file $dev $SERIAL + +case $? in + 0) + ;; + *) + echo "Frequency calibration failed" + exit 1 + ;; +esac + +CAL_VALUE=`grep "^$SERIAL," cal_values | tail -1 | sed 's/^[^,]*,//'` + +case "$CAL_VALUE" in + [1-9]*) + ;; + *) + echo "Invalid calibration value: $CAL_VALUE" + exit 1 + ;; +esac -$RAWLOAD -D $programmer -r ao_radio_xmit.ihx -echo -n "Generating RF carrier. Please enter measured frequency: " -read FREQ +echo "Reflashing with calibration: $CAL_VALUE" -CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` +$USBLOAD --cal=$CAL_VALUE --tty=$dev $ALTOS || exit 1 -echo "Programming flash with cal value " $CAL_VALUE -$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL +echo "$PRODUCT_NAME-v$VERSION $SERIAL is ready to ship" -echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE -echo $SERIAL","$CAL_VALUE >> cal_values -echo "Unplug and replug USB, cu to the board, confirm freq and record power" +exit $? diff --git a/ao-bringup/turnon_teledongle_v0.2 b/ao-bringup/turnon_teledongle_v0.2 new file mode 100755 index 00000000..058e72ce --- /dev/null +++ b/ao-bringup/turnon_teledongle_v0.2 @@ -0,0 +1,58 @@ +#!/bin/sh + +if [ -x ../ao-tools/ao-load/ao-load ]; then + AOLOAD=../ao-tools/ao-load/ao-load +elif [ -x /usr/bin/ao-load ]; then + AOLOAD=/usr/bin/ao-load +else + echo "Can't find ao-load! Aborting." + exit 1 +fi + +if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then + RAWLOAD=../ao-tools/ao-rawload/ao-rawload +elif [ -x /usr/bin/ao-rawload ]; then + RAWLOAD=/usr/bin/ao-rawload +else + echo "Can't find ao-rawload! Aborting." + exit 1 +fi + +echo "TeleDongle v0.2 Turn-On and Calibration Program" +echo "Copyright 2010 by Bdale Garbee. Released under GPL v2" +echo +echo "Expectations:" +echo "\tTeleDongle v0.2 powered from USB" +echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header" +echo "\t\twith coax from SMA to frequency counter" +echo +echo -n "TeleDongle serial number: " +read SERIAL + +echo $RAWLOAD + +case $USER in + bdale) + programmer=100 + ;; + keithp) + programmer=186 + ;; +esac + +$RAWLOAD -D $programmer -r ao_led_blink.ihx +echo "LEDs should be blinking" +sleep 5 + +$RAWLOAD -D $programmer -r ao_radio_xmit.ihx +echo -n "Generating RF carrier. Please enter measured frequency: " +read FREQ + +CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` + +echo "Programming flash with cal value " $CAL_VALUE +$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL + +echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE +echo $SERIAL","$CAL_VALUE >> cal_values +echo "Unplug and replug USB, cu to the board, confirm freq and record power" diff --git a/ao-bringup/turnon_teledonglev3 b/ao-bringup/turnon_teledonglev3 deleted file mode 100755 index e6750c45..00000000 --- a/ao-bringup/turnon_teledonglev3 +++ /dev/null @@ -1,89 +0,0 @@ -#!/bin/sh - -if [ -x ../ao-tools/ao-flash/ao-flash-lpc ]; then - FLASH_LPC=../ao-tools/ao-flash/ao-flash-lpc -elif [ -x /usr/bin/ao-flash-lpc ]; then - FLASH_LPC=/usr/bin/ao-flash-lpc -else - echo "Can't find ao-flash-lpc! Aborting." - exit 1 -fi - -if [ -x /usr/bin/ao-usbload ]; then - USBLOAD=/usr/bin/ao-usbload -else - echo "Can't find ao-usbload! Aborting." - exit 1 -fi - -PRODUCT=teledongle -PRODUCT_NAME=TeleDongle -VERSION=3.0 - -echo "$PRODUCT_NAME v$VERSION Turn-On and Calibration Program" -echo "Copyright © 2015 by Bdale Garbee. Released under GPL v2" -echo -echo "Expectations:" -echo "\t$PRODUCT_NAME v$VERSION powered from USB" -echo "\t\twith ST-Link-V2 cabled to debug header" -echo "\t\twith coax from UHF to frequency counter" -echo -echo -n "$PRODUCT_NAME-$VERSION serial number: " -read SERIAL - -BINARIES=$HOME/altusmetrumllc/Binaries - -LOADER="$BINARIES/loaders/$PRODUCT-v$VERSION-"*.elf -ALTOS="$BINARIES/$PRODUCT-v$VERSION"*.elf - -$FLASH_LPC $LOADER || exit 1 - -sleep 2 - -$USBLOAD --serial=$SERIAL $ALTOS || exit 1 - -sleep 5 - -dev=`ao-list | awk '/TeleDongle-v'"$VERSION"'/ { print $3; exit(0); }'` - -case "$dev" in -/dev/tty*) - echo "TeleDongle found on $dev" - ;; -*) - echo 'No TeleDongle-v'"$VERSION"' found' - exit 1 - ;; -esac - -echo 'E 0' > $dev - -./cal-freq-file $dev $SERIAL - -case $? in - 0) - ;; - *) - echo "Frequency calibration failed" - exit 1 - ;; -esac - -CAL_VALUE=`grep "^$SERIAL," cal_values | tail -1 | sed 's/^[^,]*,//'` - -case "$CAL_VALUE" in - [1-9]*) - ;; - *) - echo "Invalid calibration value: $CAL_VALUE" - exit 1 - ;; -esac - -echo "Reflashing with calibration: $CAL_VALUE" - -$USBLOAD --cal=$CAL_VALUE --tty=$dev $ALTOS || exit 1 - -echo "$PRODUCT_NAME-v$VERSION $SERIAL is ready to ship" - -exit $? -- 2.30.2