From 802ca114ca064a9dd557a82e992653b145f8e660 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 7 May 2013 19:28:07 -0700 Subject: [PATCH] altos: Elide M25 debug output from storage info command This is just chip-specific info that no UI actually needs. It takes a bunch of ROM to write it though, making TeleMetrum not have much space left. Signed-off-by: Keith Packard --- src/drivers/ao_m25.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/drivers/ao_m25.c b/src/drivers/ao_m25.c index 9f696ace..390637d7 100644 --- a/src/drivers/ao_m25.c +++ b/src/drivers/ao_m25.c @@ -29,6 +29,7 @@ __pdata uint32_t ao_storage_config; /* Storage unit size - device reads and writes must be within blocks of this size. Usually 256 bytes. */ __pdata uint16_t ao_storage_unit; +#define M25_DEBUG 0 /* * Each flash chip is arranged in 64kB sectors; the * chip cannot erase in units smaller than that. @@ -330,7 +331,9 @@ ao_storage_setup(void) void ao_storage_device_info(void) __reentrant { +#if M25_DEBUG uint8_t cs; +#endif #if M25_MAX_CHIPS > 1 uint8_t chip; #endif @@ -348,6 +351,7 @@ ao_storage_device_info(void) __reentrant printf ("Detected chips 1 size %d\n", ao_m25_total); #endif +#if M25_DEBUG printf ("Available chips:\n"); for (cs = 1; cs != 0; cs <<= 1) { if ((AO_M25_SPI_CS_MASK & cs) == 0) @@ -368,6 +372,7 @@ ao_storage_device_info(void) __reentrant ao_m25_instruction[M25_UID_OFFSET]); ao_mutex_put(&ao_m25_mutex); } +#endif } void -- 2.30.2