From 73fa30239f9182197b5deb43fc4db05a97467bb6 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sun, 5 Aug 2018 11:26:18 +0800 Subject: [PATCH] update changelog for Debian build --- debian/changelog | 125 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 125 insertions(+) diff --git a/debian/changelog b/debian/changelog index 75dc65b8..dc512956 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,128 @@ +altos (1.8.6-1) unstable; urgency=medium + + [ Bdale Garbee ] + * add a paragraph to the intro pointing to the altusmetrum email list + * another second seems to help on the very slow Acer laptop + * add a warning about Google limiting per-day access until/unless we pay + * altos/fox: rename fox product + * move signal that forces flash-loader on to PB8, active high + * had the sense backwards .. presence of 'attached' should put us in the loader + * add a turnon script for TeleLCO v2.0 + * add telefireeight-v1.0 to products built by default in src/Makefile + * releasing 1.8.6 + + [ Keith Packard ] + * altos/ao_cc1120: Only call ao_packet_slave_stop when HAS_SLAVE + * altos: Hack up code for TeleMetrum to make it just a tracker + * micropeak: Make reported 'max height' value show filtered max height + * altosdroid: Attempt to avoid some reported altosdroid crashes + * doc: add release check for altusmetrum-docinfo.xml copyright + * altos/stm: Simplify ao_usb_write a bit + * altos: Use max of 64 previous orient values when checking pyro limits + * altos/flash-loader: On STM, don't include ao_usb_disable + * Set version to 1.8.5.1 + * altoslib: Clarify terms in Mega pyro config + * altoslib: Remove ascending/descending from pyro config + * altoslib: Flush settings restoration commands after accel cal + * altoslib: Keep config data accel cal in antenna up form. + * altoslib: Fix data fetching during flashing of cc1111-based devices + * altos/fox: Add fox1ihu bringup firmware + * altos/fox: Initialize FOX adc + * altos/fox: Fix up Fox ADC bits + * altos/fox: Provide names for fox ADC channels + * altos/fox: Turn on all of the fox lights + * altos/fox: Add watchdog timer + * altos/fox: Enable M25 driver for MRAM. + * altos/fox: Add MRAM and SD card drivers + * altos/fox: Add fox1ihu flash loader + * altos/fox: Run app when PD6 is low + * altos/fox: update product name to show v2, enable watchdog by default + * altos/fox: Transition to current altos build environment + * altos/fox: Update ADC to fox-1 IHU Revision 2 + * altos/fox: Enable system timer in flash loader and prod watchdog with it + * altos: Build fox1ihu by default + * Remove ao_radio_cal from stm products without radios + * altos/fox1ihu: Pull down radio control pin in flash loader + * altoslib: Fix Idle Monitor on TeleMega v3 + * altos/stmf0: Change tests for AO_BOOT_CHAIN and AO_BOOT_PIN to #if + * altos/stmf0: whitespace fix + * altos/stmf0: Set 0x0 mapping to Main Flash for boot loader + * ao-bringup/turnon_telemini: Skip DFU if no DFU device is present + * altos/kernel: Define usb IN2/IN3 functions + * altos/kernel: Add USB descriptors for IN3 + * altos/stmf0: Toggle IN2 SW_BUF bit when sending data + * altos/stmf0: Add IN3 alternate endpoint support + * altos/stmf0: Fix up USB debug code + * altos/chaoskey-v1.0: Add endpoint for reading flash contents + * ao-chaosread: Add support for the new flash endpoint in chaoskey + * Update version to 1.8.5.2 + * altos: Eliminate height requirement for coast detect + * altos/test: Replace state name with 10* state value in test log. Fix raw speed + * doc: Update pyro channel info to reflect UI changes + * altos: Add µPusb v3.0 project + * altos/stmf0: leave ao_power_gpio names undefined without power management + * altos/mpusb-v3.0: Make it compile again + * altos: add 'vidtime', a simple brightness monitor + * altos/vidtime: Check for value change in normal code, not irq + * altos: Add TeleLCO v2.0 product + * altos/stm: Add per-LED port/pin mode in LED code + * altos/drivers: Pads with multi-port firing and pad selector DIP switch + * altos: Add TeleFireEight v1.0 product + * altos/telelco-v2: Change select button to alternate box/pad mode + * altos/ao_button.c: Support up to 16 buttons + * altos/telelco-v2.0: Only switch encoder mode on push, not release + * altos/drivers: Make quadrature debounce longer by default. Fix state tracking + * altos/telelco-v2.0: Reduce quadrature debounce time + * altos/driver: Add support for one-step-per-click quadrature encoder + * altos/telelco-v2.0: Use single-step quadrature code + * altos/telelco-v2.0: Only look at drag select presses, not releases + * altos/telelco-v2.0: Mixed up the select_button pin (is E0, was set to E13) + * altos/telelco-v2.0: Fix button names and pin mappings. Add drag LED. + * altos/telelco-v2.0: A bit fancier with the drag-mode LED show + * altos/telelco-v2.0: Add debug output for pad voltage display + * altos/telelco-v2.0: Change drag race selected/no-continutity pattern + * altos/stm: Add polling ADC sampler API + * altos/telelco-v2.0: Display local batt voltage at startup + * altos/stm: Enable HSI timer when HAS_ADC_SINGLE is set + * altos/telelco-v2.0: Set HAS_ADC_SINGLE to enable HSI timer + * altoslib: Revert field name changes for accel cal values + * altos/telefireeight-v1.0: Fix ADC definitions + * altos/telefire*: Do voltage tests in decivolts instead of ADC units + * altos/telelco-v2.0: Test displays at power on + * altos/telelco: Remove STATIC_TEST code from stand-alone LCO boxes + * altos/stm: Remove unused ADC names from ao_adc_single_stm.c + * altos/stm: Define ADC channels for TEMP and V_REF + * ao-bringup: Find dfu-util in $PATH for chaoskey + * altos/telelco-v0: Test display, show batt voltage at boot + * altos/driver: Improve quadrature debouncing for mechanical encoders + * altos/telelco-v0.2-cc1200: Add build for NAR hacked TeleLCO v0.2 board + * altos/telelco-v2.0: Fix AO_ADC_DUMP + * Bump version to 1.8.6 + * altos/stm: Let products override AO_LED_TYPE for stm processors + * altos/ao_pad: Use AO_LED_TYPE for computing active LEDs. + * altos/ao_pad: Turn on all LEDs for a moment at power up + * altos/ao_pad: Move LED test to the monitor task + * altos/telelco-v2.0: Do all drag race beeping from the beeping thread + * altosuilib: Split cc1111 vs arm telefire/telemini for flashing + * altos/test: Compute and show height error tracker in ao_flight_test + * altos: Share common LCO functions in ao_lco_bits.c + * altos: Build telelco-v2.0 by default + * altos: A bit more LCO code sharing + * altos: Fix telelcotwo build for new ao_lco_bits.c file + * altos: Fix LCO display while searching + * altos: Make LCO search directly drive pad/box displays + * altos: Make fewer LCO variables public + * altos: Fetch current quadrature status at startup time + * altoslib: Make stop_remote delay depend on the data rate + * ao-tools/ao-dumplog: Dump entire eeprom contents + * altos: Change 'after motor' pyro check to be >= instead of == + * altos/stm-demo: Set up for dumping eeprom + * altos/plottest: Make linewidth bigger + * altos: Add separate 'ao_launch_tick'. Use in pyro and lockout. + * Update docs for 1.8.6 + + -- Bdale Garbee Sun, 05 Aug 2018 11:25:17 +0800 + altos (1.8.5-1) unstable; urgency=medium [ Bdale Garbee ] -- 2.30.2