From 6827961c002757f8e74de44f6eb9c9029d099ebc Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 18 Dec 2013 14:25:41 -0800 Subject: [PATCH] doc: Update micropeak quick start guide to note new boost detect Now waits for one minute and 30m of altitude change to avoid false detections. Signed-off-by: Keith Packard --- doc/micropeak.xsl | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/doc/micropeak.xsl b/doc/micropeak.xsl index afa6fd15..cd9452c8 100644 --- a/doc/micropeak.xsl +++ b/doc/micropeak.xsl @@ -115,20 +115,20 @@ NAR #88757, TRA #12200 Finish preparing the rocket for flight. After the previous flight data have been reported, MicroPeak waits for - 30 seconds before starting to check for launch. This gives + one minute before starting to check for launch. This gives you time to finish assembling the rocket. As those activities might cause pressure changes inside the airframe, MicroPeak might accidentally detect boost. If you need to do - anything to the airframe after the 30 second window passes, + anything to the airframe after the one minute window passes, make sure to be careful not to disturb the altimeter. The - LED will remain dark during the 30 second delay, but after + LED will remain dark during the one minute delay, but after that, it will start blinking once every 3 seconds. - Fly the rocket. Once the rocket passes about 10m in height - (32 feet), the micro-controller will record the ground + Fly the rocket. Once the rocket passes about 30m in height + (100 feet), the micro-controller will record the ground pressure and track the pressure seen during the flight. In this mode, the LED flickers rapidly. When the rocket lands, and the pressure stabilizes, the micro-controller will record -- 2.30.2