From 68078eab3c07d8dc83302747cf6f3dcb1797c6ce Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 19 Nov 2010 20:44:29 +0800 Subject: [PATCH] doc: Document the 'Flash Image' operation. Signed-off-by: Keith Packard --- doc/altosui-doc.xsl | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/doc/altosui-doc.xsl b/doc/altosui-doc.xsl index 5f330739..4a1f43b5 100644 --- a/doc/altosui-doc.xsl +++ b/doc/altosui-doc.xsl @@ -1,6 +1,7 @@ + AltosUI Altos Metrum Graphical User Interface Manual @@ -551,6 +552,40 @@ Flash Image + This reprograms any Altus Metrum device by using a TeleMetrum or + TeleDongle as a programming dongle. Please read the directions + for connecting the programming cable in the main TeleMetrum + manual before reading these instructions. + + + Once you have the programmer and target devices connected, + push the 'Flash Image' button. That will present a dialog box + listing all of the connected devices. Carefully select the + programmer device, not the device to be programmed. + + + Next, select the image to flash to the device. These are named + with the product name and firmware version. The file selector + will start in the directory containing the firmware included + with the AltosUI package. Navigate to the directory containing + the desired firmware if it isn't there. + + + Next, a small dialog containing the device serial number and + RF calibration values should appear. If these values are + incorrect (possibly due to a corrupted image in the device), + enter the correct values here. + + + Finally, a dialog containing a progress bar will follow the + programming process. + + + When programming is complete, the target device will + reboot. Note that if the target device is connected via USB, you + will have to unplug it and then plug it back in for the USB + connection to reset so that you can communicate with the device + again. -- 2.30.2