From 07336fe0cde8900d30858957164b09f05a6cf23e Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sat, 13 Sep 2014 11:30:36 -0600 Subject: [PATCH] updated ChangeLog for release --- ChangeLog | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/ChangeLog b/ChangeLog index 7996e6b1..6c4f1dd9 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,79 @@ +commit d16e60858427bf7dbe83a858728ebf097a09207a +Author: Bdale Garbee +Date: Sat Sep 13 11:29:19 2014 -0600 + + ignore cal_values file in bringup directory + +commit 40885ae5e6be66faf08cdb9b481d1d998856ca4b +Author: Bdale Garbee +Date: Sat Sep 13 11:28:19 2014 -0600 + + need multi-arch in fat build + +commit e969172a81e24f70c349b10f429e69817900c307 +Author: Keith Packard +Date: Thu Sep 11 19:56:13 2014 -0700 + + altos: Make sure we don't beep out continuity twice in idle mode + + If the battery voltage report takes longer than the initialiation + sequence, we could get to the state reporting after the state had + switched from startup to idle. This would result in continuity being + reported the first time through the loop. Then, as the state had + already changed, we'd pass through the while test and go back to + report continuity a second time. + + Fixed by using the state remembered before beeping out the voltage to + decide whether to report the continuity. + + Signed-off-by: Keith Packard + +commit 800f3377b1a374ad5cf826aa897efdcb08059040 +Author: Keith Packard +Date: Thu Sep 11 15:00:25 2014 -0700 + + altos: Fix ability to disable telemetry by setting interval to 0 + + For non-zero telemetry intervals, the radio code limits the value + based on the data rate. However, a zero interval means that telemetry + should be entirely disabled, so that value should be left alone when + checking. + + Signed-off-by: Keith Packard + +commit 793588e218102204e69755a16bc32ea5c67f29c7 +Author: Keith Packard +Date: Thu Sep 11 14:23:29 2014 -0700 + + telegps: Was mis-configuring the 'Configure Device' dialog + + Make sure we show 'rate_label' instead of showing 'radio_enable_label' + twice. + + Signed-off-by: Keith Packard + +commit 19730b872c61f34724b0f187f71cccb6a65251dd +Author: Keith Packard +Date: Thu Sep 11 14:14:07 2014 -0700 + + altoslib: Stop re-loading previous flight when starting telemetry monitoring + + This feature is necessary on AltosDroid because there's no other UI + for reloading an old flight. It's not useful on the desktop where you + really just want to see new telemetry; old telemetry is availbale + through the 'graph flight' or 'replay' mechanisms. + + AltosDroid uses a different class for reading telemetry data, so we + can just remove this feature from altoslib at this point. + + Signed-off-by: Keith Packard + +commit 10e31d84ee5cdf10248988079df91354ae6ed612 +Author: Bdale Garbee +Date: Wed Sep 10 01:33:33 2014 -0600 + + update changelog for release + commit 05e4094411f861bf29bea2e9c39c1b66f8f267f8 Merge: acb2791 2ee937b Author: Bdale Garbee -- 2.30.2