From: Keith Packard Date: Thu, 6 Nov 2014 21:27:29 +0000 (-0800) Subject: Move teledongle 1.9 to 1.8; there's a new 1.9 X-Git-Tag: bdale-altosdroid~6^2~25 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=f2060d6ca222a04608e598baf59757f12ea2ec70 Move teledongle 1.9 to 1.8; there's a new 1.9 1.9 is now the lpc11u14-based form-factor prototype board. Signed-off-by: Keith Packard --- diff --git a/src/teledongle-v1.8/.gitignore b/src/teledongle-v1.8/.gitignore new file mode 100644 index 00000000..9a30cbb6 --- /dev/null +++ b/src/teledongle-v1.8/.gitignore @@ -0,0 +1,2 @@ +ao_product.h +teledongle-*.elf diff --git a/src/teledongle-v1.8/Makefile b/src/teledongle-v1.8/Makefile new file mode 100644 index 00000000..dc5e246c --- /dev/null +++ b/src/teledongle-v1.8/Makefile @@ -0,0 +1,89 @@ +# +# AltOS build +# +# + +include ../stm/Makefile.defs + +INC = \ + ao.h \ + ao_arch.h \ + ao_arch_funcs.h \ + ao_boot.h \ + ao_pins.h \ + ao_product.h \ + ao_task.h \ + ao_whiten.h \ + stm32l.h \ + ao_cc1200.h \ + ao_cc1200_CC1200.h \ + Makefile + +#PROFILE=ao_profile.c +#PROFILE_DEF=-DAO_PROFILE=1 + +#SAMPLE_PROFILE=ao_sample_profile.c \ +# ao_sample_profile_timer.c +#SAMPLE_PROFILE_DEF=-DHAS_SAMPLE_PROFILE=1 + +#STACK_GUARD=ao_mpu_stm.c +#STACK_GUARD_DEF=-DHAS_STACK_GUARD=1 + +ALTOS_SRC = \ + ao_boot_chain.c \ + ao_interrupt.c \ + ao_product.c \ + ao_romconfig.c \ + ao_cc1200.c \ + ao_cmd.c \ + ao_config.c \ + ao_task.c \ + ao_led.c \ + ao_stdio.c \ + ao_panic.c \ + ao_timer.c \ + ao_mutex.c \ + ao_freq.c \ + ao_dma_stm.c \ + ao_spi_stm.c \ + ao_usb_stm.c \ + ao_exti_stm.c \ + ao_send_packet.c \ + ao_eeprom_stm.c \ + ao_monitor.c \ + ao_rssi.c \ + ao_packet_master.c \ + ao_packet.c + +PRODUCT=TeleDongle-v1.8 +PRODUCT_DEF=-DTELEDONGLE +IDPRODUCT=0x000c + +CFLAGS = $(PRODUCT_DEF) $(STM_CFLAGS) $(PROFILE_DEF) $(SAMPLE_PROFILE_DEF) $(STACK_GUARD_DEF) -Os -g + +PROGNAME=teledongle-v1.8 +PROG=$(PROGNAME)-$(VERSION).elf +HEX=$(PROGNAME)-$(VERSION).ihx + +SRC=$(ALTOS_SRC) ao_teledongle.c +OBJ=$(SRC:.c=.o) + +all: $(PROG) $(HEX) + +$(PROG): Makefile $(OBJ) altos.ld + $(call quiet,CC) $(LDFLAGS) $(CFLAGS) -o $(PROG) $(OBJ) $(LIBS) + +$(OBJ): $(INC) + +ao_product.h: ao-make-product.5c ../Version + $(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@ + +distclean: clean + +clean: + rm -f *.o $(PROGNAME)-*.elf $(PROGNAME)-*.ihx + rm -f ao_product.h + +install: + +uninstall: diff --git a/src/teledongle-v1.8/ao_pins.h b/src/teledongle-v1.8/ao_pins.h new file mode 100644 index 00000000..86dd0459 --- /dev/null +++ b/src/teledongle-v1.8/ao_pins.h @@ -0,0 +1,146 @@ +/* + * Copyright © 2012 Keith Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +/* Using TeleMetrum v1.9 board */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +#define HAS_TASK_QUEUE 1 + +/* 8MHz High speed external crystal */ +#define AO_HSE 8000000 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +/* SYSCLK = 32MHz (no need to go faster than CPU) */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHz (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at 16MHz (HCLK/2) */ +#define AO_APB1_PRESCALER 2 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +/* Run APB2 at 16MHz (HCLK/2) */ +#define AO_APB2_PRESCALER 2 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +#define HAS_SERIAL_1 0 +#define USE_SERIAL_1_STDIN 0 +#define SERIAL_1_PB6_PB7 0 +#define SERIAL_1_PA9_PA10 0 + +#define HAS_SERIAL_2 0 +#define USE_SERIAL_2_STDIN 0 +#define SERIAL_2_PA2_PA3 0 +#define SERIAL_2_PD5_PD6 0 + +#define HAS_SERIAL_3 0 +#define USE_SERIAL_3_STDIN 0 +#define SERIAL_3_PB10_PB11 0 +#define SERIAL_3_PC10_PC11 0 +#define SERIAL_3_PD8_PD9 0 + +#define HAS_EEPROM 1 +#define USE_INTERNAL_FLASH 1 +#define USE_STORAGE_CONFIG 0 +#define USE_EEPROM_CONFIG 1 +#define HAS_USB 1 +#define HAS_BEEP 0 +#define HAS_RADIO 1 +#define HAS_TELEMETRY 0 +#define HAS_RSSI 1 + +#define HAS_SPI_1 0 +#define SPI_1_PA5_PA6_PA7 0 /* Barometer */ +#define SPI_1_PB3_PB4_PB5 0 +#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */ + +#define HAS_SPI_2 1 +#define SPI_2_PB13_PB14_PB15 1 /* Radio */ +#define SPI_2_PD1_PD3_PD4 0 +#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz + +#define SPI_2_PORT (&stm_gpiob) +#define SPI_2_SCK_PIN 13 +#define SPI_2_MISO_PIN 14 +#define SPI_2_MOSI_PIN 15 + +#define PACKET_HAS_SLAVE 0 +#define PACKET_HAS_MASTER 1 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN +#define LED_PORT_0 (&stm_gpioc) +#define LED_PORT_0_MASK (0xffff) +#define LED_PORT_0_SHIFT 0 +#define LED_PIN_RED 8 +#define LED_PIN_GREEN 9 +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) + +#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN) + +#define HAS_GPS 0 +#define HAS_FLIGHT 0 +#define HAS_ADC 0 +#define HAS_LOG 0 + +/* + * Telemetry monitoring + */ +#define HAS_MONITOR 1 +#define LEGACY_MONITOR 0 +#define HAS_MONITOR_PUT 1 +#define AO_MONITOR_LED AO_LED_GREEN + +/* + * Radio (cc1200) + */ + +/* gets pretty close to 434.550 */ + +#define AO_RADIO_CAL_DEFAULT 5695733 + +#define AO_FEC_DEBUG 0 +#define AO_CC1200_SPI_CS_PORT (&stm_gpioc) +#define AO_CC1200_SPI_CS_PIN 5 +#define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15 +#define AO_CC1200_SPI stm_spi2 + +#define AO_CC1200_INT_PORT (&stm_gpioe) +#define AO_CC1200_INT_PIN 1 + +#define AO_CC1200_INT_GPIO 2 +#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2 + +/* + * Profiling Viterbi decoding + */ + +#ifndef AO_PROFILE +#define AO_PROFILE 0 +#endif + +#endif /* _AO_PINS_H_ */ diff --git a/src/teledongle-v1.8/ao_teledongle.c b/src/teledongle-v1.8/ao_teledongle.c new file mode 100644 index 00000000..68d6de60 --- /dev/null +++ b/src/teledongle-v1.8/ao_teledongle.c @@ -0,0 +1,54 @@ +/* + * Copyright © 2012 Keith Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include +#include +#include +#include + +int +main(void) +{ + ao_clock_init(); + +#if HAS_STACK_GUARD + ao_mpu_init(); +#endif + + ao_task_init(); + ao_led_init(LEDS_AVAILABLE); + ao_led_on(AO_LED_RED); + ao_timer_init(); + + ao_spi_init(); + ao_dma_init(); + ao_exti_init(); + + ao_cmd_init(); + + ao_usb_init(); + ao_radio_init(); + ao_monitor_init(); + ao_rssi_init(AO_LED_RED); + ao_packet_master_init(); + ao_send_packet_init(); + + ao_config_init(); + + ao_start_scheduler(); + return 0; +}