From: Keith Packard <keithp@keithp.com>
Date: Thu, 2 Mar 2017 21:37:12 +0000 (-0800)
Subject: ao-tools/ao-flash-lpc: Adapt to current openocd LPC support
X-Git-Tag: 1.7~81
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=f004eaa2c26b4c61a8c3de2c0667a4e9865e704d;hp=59aaac44e3e164b326518b324b52d115fbb76fca

ao-tools/ao-flash-lpc: Adapt to current openocd LPC support

Openocd 0.9.0 has generalized the lpc11xx support for all lpc11xx
processors, not just the lpc11u14. This replaces the specific
lpc11u14.cfg with the general lpc11xx.cfg file.

Unlike the build we were using, this doesn't adjust the
'verify' command to adapt for the checksum which gets added during the
flashing process. Hence, we disable verification and trust that if the
flash loader works to load the OS, it's fine.

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/ao-tools/ao-flash/ao-flash-lpc b/ao-tools/ao-flash/ao-flash-lpc
index 7ac5b523..9e1d1cdb 100755
--- a/ao-tools/ao-flash/ao-flash-lpc
+++ b/ao-tools/ao-flash/ao-flash-lpc
@@ -8,9 +8,9 @@ esac
 cmds=/tmp/flash$$
 trap "rm $cmds" 0 1 15
 file="$1"
-echo "program $file verify reset" > $cmds
+echo "program $file reset" > $cmds
 openocd \
 	-f interface/stlink-v2.cfg \
-	-f target/lpc11u14.cfg \
+	-f target/lpc11xx.cfg \
 	-f $cmds \
 	-c shutdown