From: Keith Packard Date: Sun, 30 Aug 2015 00:29:00 +0000 (-0700) Subject: altos/telelco: Add drag race UI X-Git-Tag: 1.6.2^2~62^2 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=dda3f459eaff8d4e41cb44584c8ef77b8e2b3b1c;hp=dda3f459eaff8d4e41cb44584c8ef77b8e2b3b1c;ds=sidebyside altos/telelco: Add drag race UI With the unit disarmed, press and hold the fire button for five seconds to enable drag race mode. The display will show 'dr' for five seconds and beep five times to indicate that drag race mode is enabled. The decimal points in the display will all be displayed as an additional visual aid. Once every five seconds, it will beep. With drag race mode enabled, you can select a box/pad pair and press the 'fire' button to add it to the drag race group. For the current box, all members of the drag race group will have their continuity LEDs blink slowly. There will be no indication of continuity in this mode; you'll want to check that before enabling drag race mode. If you want to de-select a member of the group, just press the fire button again. Each time you push the fire button, it will beep out the pad number added or removed. Arm the box and you will not be able to add or remove members from the drag race group. Firing will simultaneously fire all members of the drag race group. To disable drag race mode, press and hold the fire button for two seconds. It will beep twice and turn off the decimal points in the display. Signed-off-by: Keith Packard ---