From: Keith Packard Date: Sat, 2 Mar 2013 04:48:28 +0000 (-0800) Subject: doc: Add version 1.2 release notes X-Git-Tag: altosdroid_v1.2-1~99 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=cb09076fe16d28e25f5b20b2178cfad10adbeddb doc: Add version 1.2 release notes Signed-off-by: Keith Packard --- diff --git a/doc/Makefile b/doc/Makefile index 59fd4ebb..7c4da29e 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -8,8 +8,9 @@ RELNOTES=\ release-notes-0.9.html \ release-notes-0.9.2.html \ release-notes-1.0.1.html \ + release-notes-1.1.html \ release-notes-1.1.1.html \ - release-notes-1.1.html + release-notes-1.2.html RELNOTES_XSL=$(RELNOTES:.html=.xsl) HTML=altusmetrum.html altos.html telemetry.html companion.html micropeak.html $(RELNOTES) diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index e696da79..c5c08d4e 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -2679,6 +2679,7 @@ NAR #88757, TRA #12200 Release Notes + Version 1.2 Version 1.1.1 Version 1.1 Version 1.0.1 diff --git a/doc/release-notes-1.2.xsl b/doc/release-notes-1.2.xsl new file mode 100644 index 00000000..610fa1a2 --- /dev/null +++ b/doc/release-notes-1.2.xsl @@ -0,0 +1,94 @@ + + + +
+ + Version 1.2 is a minor release. It provides a few new features in AltosUI + and the AltOS firmware and fixes bugs. + + + AltOS Firmware Changes + + + In TeleMini recovery mode (when booted with the outer two + debug pins connected together), the radio parameters are also + set back to defaults (434.550MHz, N0CALL, factory radio cal). + + + Add support for reflashing the SkyTraq GPS chips. This + requires special host-side code which currently only exists + for Linux. + + + Add MicroPeak support. This includes support for the ATtiny85 + processor and adaptations to the core code to allow for + devices too small to run the multi-tasking scheduler. + + + Correct Kalman filter model error covariance matrix. The + values used previously assumed continuous measurements instead + of discrete measurements. + + + + + AltosUI Changes + + + Handle missing GPS lock in 'Descent' tab. Previously, if the + GPS position of the pad was unknown, an exception would be + raised, breaking the Descent tab contents. + + + Add preliminary MegaMetrum support, including configuration, + data download and analysis. + + + Improve the graph, adding tool-tips to show values near the + cursor and making the displayed set of values configurable, + adding all of the flight data as options while leaving the + default settings alone so that the graph starts by showing + height, speed and acceleration. + + + Make the initial position of the AltosUI top level window + configurable. Along with this change, the other windows will + pop up at 'sensible' places now, instead of on top of one + another. + + + Add callsign to Monitor idle window and connecting + dialogs. This makes it clear which callsign is being used so + that the operator will be aware that it must match the flight + computer value or no communication will work. + + + When downloading flight data, display the block number so that + the user has some sense of progress. Unfortunately, we don't + know how many blocks will need to be downloaded, but at least + it isn't just sitting there doing nothing for a long time. + + + Add GPS data and a map to the graph window. This lets you see + a complete summary of the flight without needing to 'replay' + the whole thing. + + + + + Distribution Changes + + + Distribute Mac OS X packages in disk image ('.dmg') format to + greatly simplify installation. + + + Provide version numbers for the shared Java libraries to + ensure that upgrades work properly, and to allow for multiple + Altus Metrum software packages to be installed in the same + directory at the same time. + + + +