From: Keith Packard <keithp@keithp.com>
Date: Sat, 27 Sep 2014 05:58:13 +0000 (-0700)
Subject: ao-bringup: Auto-select programmer for teledongle turnon
X-Git-Tag: bdale-altosdroid~18
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=b97a125a9f8bd9619833647a9b6aa6329103e136

ao-bringup: Auto-select programmer for teledongle turnon

Bdale's programmer is SN 100, Keith's is SN 186. Use the username to
figure out which one to use.

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/ao-bringup/turnon_teledongle b/ao-bringup/turnon_teledongle
index ddee5ee8..058e72ce 100755
--- a/ao-bringup/turnon_teledongle
+++ b/ao-bringup/turnon_teledongle
@@ -31,18 +31,27 @@ read SERIAL
 
 echo $RAWLOAD
 
-$RAWLOAD -D 100 -r ao_led_blink.ihx
+case $USER in
+    bdale)
+	programmer=100
+	;;
+    keithp)
+	programmer=186
+	;;
+esac
+
+$RAWLOAD -D $programmer -r ao_led_blink.ihx
 echo "LEDs should be blinking"
 sleep 5
 
-$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+$RAWLOAD -D $programmer -r ao_radio_xmit.ihx
 echo -n "Generating RF carrier.  Please enter measured frequency: "
 read FREQ
 
 CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL
+$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
 echo $SERIAL","$CAL_VALUE >> cal_values