From: Keith Packard Date: Tue, 23 Aug 2011 00:17:43 +0000 (-0700) Subject: doc: Add note about telemetry disable mode to 1.0 release notes X-Git-Tag: 0.9.7.0~17 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=a0f62b8569c5535a2598cfb6ab52db79f0a52f92 doc: Add note about telemetry disable mode to 1.0 release notes Signed-off-by: Keith Packard --- diff --git a/doc/release-notes-1.0.xsl b/doc/release-notes-1.0.xsl index b42917c5..a3fc22d9 100644 --- a/doc/release-notes-1.0.xsl +++ b/doc/release-notes-1.0.xsl @@ -25,6 +25,13 @@ pointing upwards, now there is a configuration option allowing the antenna to point aft, to aid installation in some airframes. + + Ability to disable telemetry. For airframes where an antenna + just isn't possible, or where radio transmissions might cause + trouble with other electronics, there's a configuration option + to disable all telemetry. Note that the board will still + enable packet mode in idle mode. + Arbitrary frequency selection. The radios in Altus Metrum devices can be programmed to a wide range of frequencies, so