From: Bdale Garbee Date: Fri, 20 Jan 2023 06:00:19 +0000 (-0700) Subject: update changelog for Debian build X-Git-Tag: debian/1.9.13-1 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=9d5272aeb503e299343b20278cab4cf1efb07f2d update changelog for Debian build --- diff --git a/debian/changelog b/debian/changelog index 8f9440ec..5687c35e 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,130 @@ +altos (1.9.13-1) unstable; urgency=medium + + [ Keith Packard ] + * altos: Switch LED pin number to 8 bits + * altos: Use -ffunction-sections -fdata-sections + * altos: Add SAMD21 bits + * altos: Add sample samd21 application for snekboard + * ao-tools: Add ao-flash-samd21 script + * altos/samd21: Add register definitions + * altos/samd21: Get USB driver working in AltOS + * altos/samd21: Automatically erase flash when writing + * altos/snekboard: Indicate that USB is used for stdio + * altos: Switch LED pin number to 8 bits + * altos: Use --gc-sections + * altos: Add SAMD21 bits + * altos: Add sample samd21 application for snekboard + * ao-tools: Add ao-flash-samd21 script + * altos/samd21: Add register definitions + * altos/samd21: Get USB driver working in AltOS + * altos/samd21: Automatically erase flash when writing + * altos/snekboard: Indicate that USB is used for stdio + * Add option to beep max height in feet rather than just meters + * altos: Get SAMD21 SPI driver working in non-DMA mode + * snekboard: Add samd21 SPI test function + * This is what I'm using locally for flashing samd21 parts + * samd21: Configure ROM/RAM values per device and provide linker scripts for each + * altos: Add metro-m0 port for SAMD21G18 testing + * samd21: Fix up DMA driver + * samd21: Avoid divides in boot loader + * samd21: Fix value defines to be unsigned long + * samd21: Use DMA for SPI send + * snekboard: Need DMA for SPI now. + * samd21: Macro-ize the DMA register settings a bit + * samd21: Add ability to use arbitrary pin configs with SPI + * metro-m0: Configure on-board SPI flash part + * altos/ms5607: Use ao_gpio_set instead of stm_gpio_set + * samd21: Get ADC code compiling + * samd21: Add SPI configurations used by TM v4.0 + * samd21: Get serial driver building + * altos/telemetrum-v4.0: Almost building + * samd21: Shrink default stack to 512 bytes + * samd21: Stub out exti code + * samd21: Stub out beep code + * altos/telemetrum-v4.0: It links + * samd21: Wire up pin interrupts + * metro-m0: Demo pin interrupts + * samd21: Get beep code working + * samd21: Move DMA channel defs to ao_dma_samd21.h + * samd21: Hook up AltOS timer functionality + * samd21: Hook up AltOS style ADC + * metro-m0: Hook up ADC sample from A pins + * telemetrum-v4.0: Add beeper and fix ADC defs + * telemetrum-v4.0: Remove unused file + * drivers/ublox: Clean up some debug mode code + * samd21: Leave serial RX interrupts enabled + * metro-m0: Add GPS support + * telemetrum-v4.0: Set USE_SERIAL_1_STDIN to 0 + * telegps: Copy altosui 'beep feet' bits to telegps + * altos/ms5607: Use duplex for fetching data + * samd21: PA20 maps to SERCOM3.2 not SERCOM3.3 + * samd21: Limit SPI baud value to 1 + * samd21: Restore pin cfg when exti is disabled + * samd21: AO_SPI_0_PA04_PA05_PA06 is FUNC_D + * fixup for exti restore + * telemetrum-v4.0: MS5607 doesn't share SPI controller + * telemetrum-v4.0: Correct beeper configuration + * altos/cc1200: Simplify interrupt handling + * altos: Avoid modulus in task queue on parts without idiv + * samd21: Save interrupt pin status before enabling interrupts + * attiny, stm32l0: Note that these chips don't support spi duplex + * altos: Add ao_gps_utc_tick + * altos/ms5607: Fixup ms5607 changes for other chips + * altos: Make sure APRS packets are reasonably separated + * altos: Enable telemetrum telemetry for telemetrum v4.0 + * altoslib: Handle TeleMetrum v4.0 in idle mode + * Add TeleMetrum v4.0 to release files + * ao-tools/ao-eeprom: Add support for TeleMega v5.0 + * altoslib: Add notes about updating ao-eeprom for new product + * altos: Add timeout for MS5607 ADC conversion + * easymotor-v3.0: Use motor pressure to trigger data logging + * easymotor-v3.0: Clean up build bits + * altos/stm: Add ao_spi_put_pins for MS5607 driver + * altos/stmf0: Add ao_spi_put_pins for MS5067 driver + * altos: Add timeout in MS5607 get_sample code + * drivers: Add BMI088 driver + * altos: Add BMI088 test framework using Nucleo32 board for stm32f042 + * altos: Add TeleMega v6.0 + * doc: Update docs for asciidoctor-pdf version 2.x + * src/drivers: Ignore printf warnings in ao_aprs.c + * drivers: Add AO_LOG_NORMALIZED support to BMI088 command + * altos: Split AO_LOG_NORMALIZED support out in telemetry code + * ao-tools: Fix buffer overflow in lib/ao-hex.c + * ao-tools: Update ao-eeprom for TeleMega v6 + * altoslib: Add TeleMega v6 support + * altos/telelco: Add some debug aids for TeleLCO event stuff + * easymotor-v3: Fix pressure to adc conversion to use reference voltage + * altos/easymotor: Move pressure conversion code to ao_motor_flight.c + * altos: Add makefiles for telemega v6 + * doc: Add release notes for 1.9.13 + * doc: Update copyright year to 2023 + * Version 1.9.13 + * Disable TM v4.0 firmware for 1.9.13 + * doc: Add release notes for 1.9.13 + * doc: Update copyright year to 2023 + * Version 1.9.13 + + [ Bdale Garbee ] + * first stab at support for TeleMetrum v4.0 + * update Releasing with tweaks made during 1.9.12 release process + * easymini v3.0 production scripts working + * EasyMotor v3 production script working, sans pressure input test + * ao-tools: don't do 'm 0' after 'E 0' since EasyMotor doesn't support it + * update Releasing to include EasyMini v3.0 loader + * ao-tools: new ao-test-pressure utility for bench testing EasyMotor + * ao-bringup: final production test script for EasyMotor v3 + * ao-tools: increase robustness of turnon_easymotor + * TeleMetrum v4.0 work in progress + * altosui: force Locale.ROOT during CSV export to avoid commas in decimals + * ao-tools: return ao-flash-lpc operaton to "full speed" + * doc: add a warning to TeleLaunch docs about siren volume levels + * doc: add a link to a reference on ARES/RACES use of PowerPole connectors + * doc: update EasyMotor behavior description for firmware 1.9.13 and later + * doc: update EasyMotor behavior description for firmware 1.9.13 and later + * releasing 1.9.13 + + -- Bdale Garbee Thu, 19 Jan 2023 22:59:20 -0700 + altos (1.9.12-1) unstable; urgency=medium [ Bdale Garbee ]