From: Keith Packard Date: Fri, 1 Apr 2011 03:58:14 +0000 (-0700) Subject: altos: Add initial TeleBT code X-Git-Tag: 0.9.3~77 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=8e74cf6d1c70a7a17d01c20f6831571245392498 altos: Add initial TeleBT code Prototyping with a TeleMetrum v0.1 board and a serial link to a bluetooth module. Signed-off-by: Keith Packard --- diff --git a/src/Makefile b/src/Makefile index a5dec57b..d83ec668 100644 --- a/src/Makefile +++ b/src/Makefile @@ -10,6 +10,7 @@ SUBDIRS=\ telemetrum-v1.1 telemetrum-v1.0 \ teledongle-v0.2 teledongle-v0.1 \ telemini-v0.1 telenano-v0.1 \ + telebt-v0.0 \ telemetrum-v0.1-sky telemetrum-v0.1-sirf \ tidongle test diff --git a/src/Makefile.proto b/src/Makefile.proto index 5aad445f..ca68edbc 100644 --- a/src/Makefile.proto +++ b/src/Makefile.proto @@ -136,12 +136,20 @@ M25_DRIVER_SRC = \ # SIRF_DRIVER_SRC = \ ao_gps_sirf.c + # # Skytraq driver source # SKY_DRIVER_SRC = \ ao_gps_skytraq.c + +# +# BTM-182 driver source +# +BTM_DRIVER_SRC = \ + ao_btm.c + # # Tasks run on TeleMetrum # @@ -229,6 +237,24 @@ TNANO_BASE_SRC = \ $(TNANO_TASK_SRC) \ $(TNANO_MAIN_SRC) +# +# Sources for TeleDongle +# + +TBT_MAIN_SRC = \ + ao_telebt.c + +TBT_BASE_SRC = \ + $(ALTOS_SRC) \ + $(ALTOS_DRIVER_SRC) \ + $(TELE_RECEIVER_SRC) \ + $(TELE_COMMON_SRC) \ + $(SERIAL_DRIVER_SRC) \ + $(USB_DRIVER_SRC) \ + $(BTM_DRIVER_SRC) \ + $(DBG_SRC) \ + $(TBT_MAIN_SRC) + # # TI Dongle sources # diff --git a/src/ao.h b/src/ao.h index 89109fd9..64f33f0b 100644 --- a/src/ao.h +++ b/src/ao.h @@ -903,6 +903,10 @@ ao_dbg_init(void); #endif #if HAS_SERIAL_1 +#ifndef USE_SERIAL_STDIN +#error Please define USE_SERIAL_STDIN +#endif + void ao_serial_rx1_isr(void) __interrupt 3; @@ -912,12 +916,21 @@ ao_serial_tx1_isr(void) __interrupt 14; char ao_serial_getchar(void) __critical; +#if USE_SERIAL_STDIN +char +ao_serial_pollchar(void) __critical; + +void +ao_serial_set_stdin(uint8_t stdin); +#endif + void ao_serial_putchar(char c) __critical; #define AO_SERIAL_SPEED_4800 0 #define AO_SERIAL_SPEED_9600 1 -#define AO_SERIAL_SPEED_57600 2 +#define AO_SERIAL_SPEED_19200 2 +#define AO_SERIAL_SPEED_57600 3 void ao_serial_set_speed(uint8_t speed); @@ -1332,4 +1345,9 @@ ao_packet_slave_stop(void); void ao_packet_slave_init(uint8_t enable); +/* ao_btm.c */ + +void +ao_btm_init(void); + #endif /* _AO_H_ */ diff --git a/src/ao_btm.c b/src/ao_btm.c new file mode 100644 index 00000000..224d3e81 --- /dev/null +++ b/src/ao_btm.c @@ -0,0 +1,72 @@ +/* + * Copyright © 2011 Keith Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include "ao.h" + +uint8_t ao_btm_enable; +extern volatile __xdata struct ao_fifo ao_usart1_rx_fifo; + +void +ao_btm(void) +{ + char c; + while (ao_btm_enable) { + c = ao_serial_pollchar(); + if (c != AO_READ_AGAIN) + ao_usb_putchar(c); + else { + ao_usb_flush(); + ao_sleep(&ao_usart1_rx_fifo); + } + } + ao_exit(); +} + +__xdata struct ao_task ao_btm_task; + +static void +ao_btm_forward(void) +{ + char c; + ao_btm_enable = 1; + flush(); + ao_add_task(&ao_btm_task, ao_btm, "btm"); + + while ((c = ao_usb_getchar()) != '~') { + if (c == '\n') c = '\r'; + ao_serial_putchar(c); + } + ao_btm_enable = 0; + while (ao_btm_task.wchan) { + ao_wakeup(&ao_usart1_rx_fifo); + ao_delay(AO_MS_TO_TICKS(10)); + } +} + +__code struct ao_cmds ao_btm_cmds[] = { + { ao_btm_forward, "B \0BTM serial link." }, + { 0, NULL }, +}; + + +void +ao_btm_init (void) +{ + ao_serial_init(); + ao_serial_set_speed(AO_SERIAL_SPEED_19200); + ao_cmd_register(&ao_btm_cmds[0]); +} diff --git a/src/ao_pins.h b/src/ao_pins.h index 30f2decc..a4ebd63b 100644 --- a/src/ao_pins.h +++ b/src/ao_pins.h @@ -25,6 +25,7 @@ #define HAS_GPS 1 #define HAS_SERIAL_1 1 #define HAS_ADC 1 + #define USE_SERIAL_STDIN 0 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 0 #define HAS_DBG 1 @@ -49,6 +50,7 @@ #define HAS_BEEP 1 #define HAS_GPS 1 #define HAS_SERIAL_1 1 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 1 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 0 @@ -77,6 +79,7 @@ #define HAS_USB 1 #define HAS_BEEP 0 #define HAS_SERIAL_1 0 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 0 #define HAS_DBG 1 #define HAS_EEPROM 0 @@ -100,6 +103,7 @@ #define HAS_BEEP 0 #define HAS_GPS 0 #define HAS_SERIAL_1 0 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 1 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 1 @@ -123,6 +127,7 @@ #define HAS_BEEP 0 #define HAS_GPS 0 #define HAS_SERIAL_1 0 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 1 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 1 @@ -146,6 +151,7 @@ #define HAS_BEEP 1 #define HAS_GPS 1 #define HAS_SERIAL_1 1 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 1 #define HAS_DBG 0 #define HAS_EEPROM 1 @@ -172,6 +178,7 @@ #define HAS_USB 1 #define HAS_BEEP 0 #define HAS_SERIAL_1 0 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 0 #define HAS_DBG 0 #define HAS_EEPROM 0 @@ -194,6 +201,7 @@ #define HAS_USB 1 #define HAS_BEEP 0 #define HAS_SERIAL_1 0 + #define USE_SERIAL_STDIN 0 #define HAS_ADC 0 #define HAS_DBG 1 #define HAS_EEPROM 0 @@ -210,6 +218,29 @@ #define HAS_IGNITE 0 #endif +#if defined(TELEBT_V_0_0) + #define HAS_FLIGHT 0 + #define HAS_USB 1 + #define HAS_BEEP 0 + #define HAS_SERIAL_1 1 + #define USE_SERIAL_STDIN 1 + #define HAS_ADC 0 + #define HAS_DBG 1 + #define HAS_EEPROM 0 + #define DBG_ON_P1 0 + #define DBG_ON_P0 1 + #define IGNITE_ON_P2 0 + #define IGNITE_ON_P0 0 + #define PACKET_HAS_MASTER 1 + #define PACKET_HAS_SLAVE 0 + #define AO_LED_RED 2 + #define AO_LED_GREEN 1 + #define LEDS_AVAILABLE (AO_LED_RED|AO_LED_GREEN) + #define SPI_CS_ON_P1 1 + #define SPI_CS_ON_P0 0 + #define HAS_IGNITE 0 +#endif + #if DBG_ON_P1 #define DBG_CLOCK (1 << 4) /* mi0 */ @@ -270,6 +301,10 @@ #error Please define HAS_SERIAL_1 #endif +#ifndef USE_SERIAL_STDIN +#error Please define USE_SERIAL_STDIN +#endif + #ifndef HAS_ADC #error Please define HAS_ADC #endif diff --git a/src/ao_serial.c b/src/ao_serial.c index dd383fca..b8e9d2bf 100644 --- a/src/ao_serial.c +++ b/src/ao_serial.c @@ -20,12 +20,20 @@ volatile __xdata struct ao_fifo ao_usart1_rx_fifo; volatile __xdata struct ao_fifo ao_usart1_tx_fifo; +#if USE_SERIAL_STDIN +__pdata uint8_t ao_serial_stdin; +#endif + void ao_serial_rx1_isr(void) __interrupt 3 { if (!ao_fifo_full(ao_usart1_rx_fifo)) ao_fifo_insert(ao_usart1_rx_fifo, U1DBUF); ao_wakeup(&ao_usart1_rx_fifo); +#if USE_SERIAL_STDIN + if (ao_serial_stdin) + ao_wakeup(&ao_stdin_ready); +#endif } static __xdata uint8_t ao_serial_tx1_started; @@ -69,6 +77,29 @@ ao_serial_getchar(void) __critical return c; } +#if USE_SERIAL_STDIN +char +ao_serial_pollchar(void) __critical +{ + char c; +#if 0 + if (!ao_serial_stdin) + return AO_READ_AGAIN; +#endif + if (ao_fifo_empty(ao_usart1_rx_fifo)) + return AO_READ_AGAIN; + ao_fifo_remove(ao_usart1_rx_fifo,c); + return c; +} + +void +ao_serial_set_stdin(uint8_t stdin) +{ + ao_serial_stdin = stdin; +} + +#endif + void ao_serial_putchar(char c) __critical { @@ -109,6 +140,10 @@ static const struct { /* .baud = */ 163, /* .gcr = */ (8 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB }, + /* [AO_SERIAL_SPEED_19200] = */ { + /* .baud = */ 163, + /* .gcr = */ (9 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB + }, /* [AO_SERIAL_SPEED_57600] = */ { /* .baud = */ 59, /* .gcr = */ (11 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB @@ -156,4 +191,11 @@ ao_serial_init(void) IEN2 |= IEN2_UTX1IE; ao_cmd_register(&ao_serial_cmds[0]); +#if 0 +#if USE_SERIAL_STDIN + ao_add_stdio(ao_serial_pollchar, + ao_serial_putchar, + NULL); +#endif +#endif } diff --git a/src/ao_stdio.c b/src/ao_stdio.c index 6e1f5eff..c7080ec1 100644 --- a/src/ao_stdio.c +++ b/src/ao_stdio.c @@ -21,7 +21,7 @@ * Basic I/O functions to support SDCC stdio package */ -#define AO_NUM_STDIOS 2 +#define AO_NUM_STDIOS (HAS_USB + PACKET_HAS_SLAVE + USE_SERIAL_STDIN) static __xdata struct ao_stdio stdios[AO_NUM_STDIOS]; static __data int8_t ao_cur_stdio; diff --git a/src/ao_telebt.c b/src/ao_telebt.c new file mode 100644 index 00000000..295f0cec --- /dev/null +++ b/src/ao_telebt.c @@ -0,0 +1,41 @@ +/* + * Copyright © 2011 Keith Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include "ao.h" + +void +main(void) +{ + ao_clock_init(); + + /* Turn on the LED until the system is stable */ + ao_led_init(LEDS_AVAILABLE); + ao_led_on(AO_LED_RED); + ao_timer_init(); + ao_cmd_init(); + ao_usb_init(); + ao_monitor_init(AO_LED_GREEN, TRUE); + ao_rssi_init(AO_LED_RED); + ao_radio_init(); + ao_packet_master_init(); + ao_btm_init(); +#if HAS_DBG + ao_dbg_init(); +#endif + ao_config_init(); + ao_start_scheduler(); +} diff --git a/src/telebt-v0.0/.gitignore b/src/telebt-v0.0/.gitignore new file mode 100644 index 00000000..1acfbfcc --- /dev/null +++ b/src/telebt-v0.0/.gitignore @@ -0,0 +1,2 @@ +telebt-* +ao_product.h diff --git a/src/telebt-v0.0/.sdcdbrc b/src/telebt-v0.0/.sdcdbrc new file mode 100644 index 00000000..710b4a2f --- /dev/null +++ b/src/telebt-v0.0/.sdcdbrc @@ -0,0 +1 @@ +--directory=.. diff --git a/src/telebt-v0.0/Makefile.defs b/src/telebt-v0.0/Makefile.defs new file mode 100644 index 00000000..f0bb5e0c --- /dev/null +++ b/src/telebt-v0.0/Makefile.defs @@ -0,0 +1,8 @@ +PROG = telebt-v0.0-$(VERSION).ihx + +SRC = \ + $(TBT_BASE_SRC) + +PRODUCT=TeleBT-v0.0 +PRODUCT_DEF=-DTELEBT_V_0_0 +IDPRODUCT=0x000e