From: Keith Packard Date: Tue, 23 Nov 2010 06:26:19 +0000 (-0800) Subject: doc: Add internal documentation for AltOS X-Git-Tag: debian/0.7.1+168+gcb08bc2~15^2~16 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=737f2fdd012202f453120ece117ae5e859b32082 doc: Add internal documentation for AltOS Signed-off-by: Keith Packard --- diff --git a/doc/Makefile b/doc/Makefile index 57300c10..52934290 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -2,8 +2,8 @@ # http://docbook.sourceforge.net/release/xsl/current/README # -HTML=telemetrum-doc.html altosui-doc.html -PDF=telemetrum-doc.pdf altosui-doc.pdf +HTML=telemetrum-doc.html altosui-doc.html altos.html +PDF=telemetrum-doc.pdf altosui-doc.pdf altos.pdf DOC=$(HTML) $(PDF) HTMLSTYLE=/usr/share/xml/docbook/stylesheet/docbook-xsl/html/docbook.xsl FOSTYLE=/usr/share/xml/docbook/stylesheet/docbook-xsl/fo/docbook.xsl diff --git a/doc/altos.xsl b/doc/altos.xsl new file mode 100644 index 00000000..9a88a5b5 --- /dev/null +++ b/doc/altos.xsl @@ -0,0 +1,1441 @@ + + + + + AltOS + Altos Metrum Operating System + + + Keith + Packard + + + 2010 + Keith Packard + + + + This document is released under the terms of the + + Creative Commons ShareAlike 3.0 + + license. + + + + + 0.1 + 22 November 2010 + Initial content + + + + + Overview + + AltOS is a operating system built for the 8051-compatible + processor found in the TI cc1111 microcontroller. It's designed + to be small and easy to program with. The main features are: + + + Multi-tasking. While the 8051 doesn't provide separate + address spaces, it's often easier to write code that operates + in separate threads instead of tying everything into one giant + event loop. + + + + Non-preemptive. This increases latency for thread + switching but reduces the number of places where context + switching can occur. It also simplifies the operating system + design somewhat. Nothing in the target system (rocket flight + control) has tight timing requirements, and so this seems like + a reasonable compromise. + + + + Sleep/wakeup scheduling. Taken directly from ancient + Unix designs, these two provide the fundemental scheduling + primitive within AltOS. + + + + Mutexes. As a locking primitive, mutexes are easier to + use than semaphores, at least in my experience. + + + + Timers. Tasks can set an alarm which will abort any + pending sleep, allowing operations to time-out instead of + blocking forever. + + + + + + The device drivers and other subsystems in AltOS are + conventionally enabled by invoking their _init() function from + the 'main' function before that calls + ao_start_scheduler(). These functions initialize the pin + assignments, add various commands to the command processor and + may add tasks to the scheduler to handle the device. A typical + main program, thus, looks like: + +void +main(void) +{ + ao_clock_init(); + + /* Turn on the LED until the system is stable */ + ao_led_init(LEDS_AVAILABLE); + ao_led_on(AO_LED_RED); + ao_timer_init(); + ao_cmd_init(); + ao_usb_init(); + ao_monitor_init(AO_LED_GREEN, TRUE); + ao_rssi_init(AO_LED_RED); + ao_radio_init(); + ao_packet_slave_init(); + ao_packet_master_init(); +#if HAS_DBG + ao_dbg_init(); +#endif + ao_config_init(); + ao_start_scheduler(); +} + + As you can see, a long sequence of subsystems are initialized + and then the scheduler is started. + + + + Programming the 8051 with SDCC + + The 8051 is a primitive 8-bit processor, designed in the mists + of time in as few transistors as possible. The architecture is + highly irregular and includes several separate memory + spaces. Furthermore, accessing stack variables is slow, and the + stack itself is of limited size. While SDCC papers over the + instruction set, it is not completely able to hide the memory + architecture from the application designer. + +
+ 8051 memory spaces + + The __data/__xdata/__code memory spaces below were completely + separate in the original 8051 design. In the cc1111, this + isn't true—they all live in a single unified 64kB address + space, and so it's possible to convert any address into a + unique 16-bit address. SDCC doesn't know this, and so a + 'global' address to SDCC consumes 3 bytes of memory, 1 byte as + a tag indicating the memory space and 2 bytes of offset within + that space. AltOS avoids these 3-byte addresses as much as + possible; using them involves a function call per byte + access. The result is that nearly every variable declaration + is decorated with a memory space identifier which clutters the + code but makes the resulting code far smaller and more + efficient. + + + SDCC 8051 memory spaces + + __data + + + The 8051 can directly address these 128 bytes of + memory. This makes them precious so they should be + reserved for frequently addressed values. Oh, just to + confuse things further, the 8 general registers in the + CPU are actually stored in this memory space. There are + magic instructions to 'bank switch' among 4 banks of + these registers located at 0x00 - 0x1F. AltOS uses only + the first bank at 0x00 - 0x07, leaving the other 24 + bytes available for other data. + + + + + __idata + + + There are an additional 128 bytes of internal memory + that share the same address space as __data but which + cannot be directly addressed. The stack normally + occupies this space and so AltOS doesn't place any + static storage here. + + + + + __xdata + + + This is additional general memory accessed through a + single 16-bit address register. The CC1111F32 has 32kB + of memory available here. Most program data should live + in this memory space. + + + + + __pdata + + + This is an alias for the first 256 bytes of __xdata + memory, but uses a shorter addressing mode with + single global 8-bit value for the high 8 bits of the + address and any of several 8-bit registers for the low 8 + bits. AltOS uses a few bits of this memory, it should + probably use more. + + + + + __code + + + All executable code must live in this address space, but + you can stick read-only data here too. It is addressed + using the 16-bit address register and special 'code' + access opcodes. Anything read-only should live in this space. + + + + + __bit + + + The 8051 has 128 bits of bit-addressible memory that + lives in the __data segment from 0x20 through + 0x2f. Special instructions access these bits + in a single atomic operation. This isn't so much a + separate address space as a special addressing mode for + a few bytes in the __data segment. + + + + + __sfr, __sfr16, __sfr32, __sbit + + + Access to physical registers in the device use this mode + which declares the variable name, it's type and the + address it lives at. No memory is allocated for these + variables. + + + + +
+
+ Function calls on the 8051 + + Because stack addressing is expensive, and stack space + limited, the default function call declaration in SDCC + allocates all parameters and local variables in static global + memory. Just like fortran. This makes these functions + non-reentrant, and also consume space for parameters and + locals even when they are not running. The benefit is smaller + code and faster execution. + +
+ __reentrant functions + + All functions which are re-entrant, either due to recursion + or due to a potential context switch while executing, should + be marked as __reentrant so that their parameters and local + variables get allocated on the stack. This ensures that + these values are not overwritten by another invocation of + the function. + + + Functions which use significant amounts of space for + arguments and/or local variables and which are not often + invoked can also be marked as __reentrant. The resulting + code will be larger, but the savings in memory are + frequently worthwhile. + +
+
+ Non __reentrant functions + + All parameters and locals in non-reentrant functions can + have data space decoration so that they are allocated in + __xdata, __pdata or __data space as desired. This can avoid + consuming __data space for infrequently used variables in + frequently used functions. + + + All library functions called by SDCC, including functions + for multiplying and dividing large data types, are + non-reentrant. Because of this, interrupt handlers must not + invoke any library functions, including the multiply and + divide code. + +
+
+ __interrupt functions + + Interrupt functions are declared with with an __interrupt + decoration that includes the interrupt number. SDCC saves + and restores all of the registers in these functions and + uses the 'reti' instruction at the end so that they operate + as stand-alone interrupt handlers. Interrupt functions may + call the ao_wakeup function to wake AltOS tasks. + +
+
+ __critical functions and statements + + SDCC has built-in support for suspending interrupts during + critical code. Functions marked as __critical will have + interrupts suspended for the whole period of + execution. Individual statements may also be marked as + __critical which blocks interrupts during the execution of + that statement. Keeping critical sections as short as + possible is key to ensuring that interrupts are handled as + quickly as possible. + +
+
+ + + Task functions + + This chapter documents how to create, destroy and schedule AltOS tasks. + + + AltOS Task Functions + + ao_add_task + + +void +ao_add_task(__xdata struct ao_task * task, + void (*start)(void), + __code char *name); + + + This initializes the statically allocated task structure, + assigns a name to it (not used for anything but the task + display), and the start address. It does not switch to the + new task. 'start' must not ever return; there is no place + to return to. + + + + + ao_exit + + +void +ao_exit(void) + + + This terminates the current task. + + + + + ao_sleep + + +void +ao_sleep(__xdata void *wchan) + + + This suspends the current task until 'wchan' is signaled + by ao_wakeup, or until the timeout, set by ao_alarm, + fires. If 'wchan' is signaled, ao_sleep returns 0, otherwise + it returns 1. This is the only way to switch to another task. + + + + + ao_wakeup + + +void +ao_wakeup(__xdata void *wchan) + + + Wake all tasks blocked on 'wchan'. This makes them + available to be run again, but does not actually switch + to another task. + + + + + ao_alarm + + +void +ao_alarm(uint16_t delay) + + + Schedules an alarm to fire in at least 'delay' ticks. If + the task is asleep when the alarm fires, it will wakeup + and ao_sleep will return 1. + + + + + ao_wake_task + + +void +ao_wake_task(__xdata struct ao_task *task) + + + Force a specific task to wake up, independent of which + 'wchan' it is waiting for. + + + + + ao_start_scheduler + + +void +ao_start_scheduler(void) + + + This is called from 'main' when the system is all + initialized and ready to run. It will not return. + + + + + ao_clock_init + + +void +ao_clock_init(void) + + + This turns on the external 48MHz clock then switches the + hardware to using it. This is required by many of the + internal devices like USB. It should be called by the + 'main' function first, before initializing any of the + other devices in the system. + + + + + + + Timer Functions + + AltOS sets up one of the cc1111 timers to run at 100Hz and + exposes this tick as the fundemental unit of time. At each + interrupt, AltOS increments the counter, and schedules any tasks + waiting for that time to pass, then fires off the ADC system to + collect current data readings. Doing this from the ISR ensures + that the ADC values are sampled at a regular rate, independent + of any scheduling jitter. + + + AltOS Timer Functions + + ao_time + + +uint16_t +ao_time(void) + + + Returns the current system tick count. Note that this is + only a 16 bit value, and so it wraps every 655.36 seconds. + + + + + ao_delay + + +void +ao_delay(uint16_t ticks); + + + Suspend the current task for at least 'ticks' clock units. + + + + + ao_timer_set_adc_interval + + +void +ao_timer_set_adc_interval(uint8_t interval); + + + This sets the number of ticks between ADC samples. If set + to 0, no ADC samples are generated. AltOS uses this to + slow down the ADC sampling rate to save power. + + + + + ao_timer_init + + +void +ao_timer_init(void) + + + This turns on the 100Hz tick using the CC1111 timer 1. It + is required for any of the time-based functions to + work. It should be called by 'main' before ao_start_scheduler. + + + + + + + AltOS Mutexes + + AltOS provides mutexes as a basic synchronization primitive. Each + mutexes is simply a byte of memory which holds 0 when the mutex + is free or the task id of the owning task when the mutex is + owned. Mutex calls are checked—attempting to acquire a mutex + already held by the current task or releasing a mutex not held + by the current task will both cause a panic. + + + Mutex Functions + + ao_mutex_get + + +void +ao_mutex_get(__xdata uint8_t *mutex); + + + Acquires the specified mutex, blocking if the mutex is + owned by another task. + + + + + ao_mutex_put + + +void +ao_mutex_put(__xdata uint8_t *mutex); + + + Releases the specified mutex, waking up all tasks waiting + for it. + + + + + + + CC1111 DMA engine + + The CC1111 contains a useful bit of extra hardware in the form + of five programmable DMA engines. They can be configured to copy + data in memory, or between memory and devices (or even between + two devices). AltOS exposes a general interface to this hardware + and uses it to handle radio and SPI data. + + + Code using a DMA engine should allocate one at startup + time. There is no provision to free them, and if you run out, + AltOS will simply panic. + + + During operation, the DMA engine is initialized with the + transfer parameters. Then it is started, at which point it + awaits a suitable event to start copying data. When copying data + from hardware to memory, that trigger event is supplied by the + hardware device. When copying data from memory to hardware, the + transfer is usually initiated by software. + + + AltOS DMA functions + + ao_dma_alloc + + +uint8_t +ao_dma_alloc(__xdata uint8_t *done) + + + Allocates a DMA engine, returning the identifier. Whenever + this DMA engine completes a transfer. 'done' is cleared + when the DMA is started, and then receives the + AO_DMA_DONE bit on a successful transfer or the + AO_DMA_ABORTED bit if ao_dma_abort was called. Note that + it is possible to get both bits if the transfer was + aborted after it had finished. + + + + + ao_dma_set_transfer + + +void +ao_dma_set_transfer(uint8_t id, + void __xdata *srcaddr, + void __xdata *dstaddr, + uint16_t count, + uint8_t cfg0, + uint8_t cfg1) + + + Initializes the specified dma engine to copy data + from 'srcaddr' to 'dstaddr' for 'count' units. cfg0 and + cfg1 are values directly out of the CC1111 documentation + and tell the DMA engine what the transfer unit size, + direction and step are. + + + + + ao_dma_start + + +void +ao_dma_start(uint8_t id); + + + Arm the specified DMA engine and await a signal from + either hardware or software to start transferring data. + + + + + ao_dma_trigger + + +void +ao_dma_trigger(uint8_t id) + + + Trigger the specified DMA engine to start copying data. + + + + + ao_dma_abort + + +void +ao_dma_abort(uint8_t id) + + + Terminate any in-progress DMA transation, marking its + 'done' variable with the AO_DMA_ABORTED bit. + + + + + + + SDCC Stdio interface + + AltOS offers a stdio interface over both USB and the RF packet + link. This provides for control of the device localy or + remotely. This is hooked up to the stdio functions in SDCC by + providing the standard putchar/getchar/flush functions. These + automatically multiplex the two available communication + channels; output is always delivered to the channel which + provided the most recent input. + + + SDCC stdio functions + + putchar + + +void +putchar(char c) + + + Delivers a single character to the current console + device. + + + + + getchar + + +char +getchar(void) + + + Reads a single character from any of the available + console devices. The current console device is set to + that which delivered this character. This blocks until + a character is available. + + + + + flush + + +void +flush(void) + + + Flushes the current console device output buffer. Any + pending characters will be delivered to the target device. +xo + + + + ao_add_stdio + + +void +ao_add_stdio(char (*pollchar)(void), + void (*putchar)(char), + void (*flush)(void)) + + + This adds another console device to the available + list. + + + 'pollchar' returns either an available character or + AO_READ_AGAIN if none is available. Significantly, it does + not block. The device driver must set 'ao_stdin_ready' to + 1 and call ao_wakeup(&ao_stdin_ready) when it receives + input to tell getchar that more data is available, at + which point 'pollchar' will be called again. + + + 'putchar' queues a character for output, flushing if the output buffer is + full. It may block in this case. + + + 'flush' forces the output buffer to be flushed. It may + block until the buffer is delivered, but it is not + required to do so. + + + + + + + Command line interface + + AltOS includes a simple command line parser which is hooked up + to the stdio interfaces permitting remote control of the device + over USB or the RF link as desired. Each command uses a single + character to invoke it, the remaining characters on the line are + available as parameters to the command. + + + AltOS command line parsing functions + + ao_cmd_register + + +void +ao_cmd_register(__code struct ao_cmds *cmds) + + + This registers a set of commands with the command + parser. There is a fixed limit on the number of command + sets, the system will panic if too many are registered. + Each command is defined by a struct ao_cmds entry: + +struct ao_cmds { + char cmd; + void (*func)(void); + const char *help; +}; + + 'cmd' is the character naming the command. 'func' is the + function to invoke and 'help' is a string displayed by the + '?' command. Syntax errors found while executing 'func' + should be indicated by modifying the global ao_cmd_status + variable with one of the following values: + + + ao_cmd_success + + + The command was parsed successfully. There is no + need to assign this value, it is the default. + + + + + ao_cmd_lex_error + + + A token in the line was invalid, such as a number + containing invalid characters. The low-level + lexing functions already assign this value as needed. + + + + + ao_syntax_error + + + The command line is invalid for some reason other + than invalid tokens. + + + + + + + + + ao_cmd_lex + + +void +ao_cmd_lex(void); + + + This gets the next character out of the command line + buffer and sticks it into ao_cmd_lex_c. At the end of the + line, ao_cmd_lex_c will get a newline ('\n') character. + + + + + ao_cmd_put16 + + +void +ao_cmd_put16(uint16_t v); + + + Writes 'v' as four hexadecimal characters. + + + + + ao_cmd_put8 + + +void +ao_cmd_put8(uint8_t v); + + + Writes 'v' as two hexadecimal characters. + + + + + ao_cmd_white + + +void +ao_cmd_white(void) + + + This skips whitespace by calling ao_cmd_lex while + ao_cmd_lex_c is either a space or tab. It does not skip + any characters if ao_cmd_lex_c already non-white. + + + + + ao_cmd_hex + + +void +ao_cmd_hex(void) + + + This reads a 16-bit hexadecimal value from the command + line with optional leading whitespace. The resulting value + is stored in ao_cmd_lex_i; + + + + + ao_cmd_decimal + + +void +ao_cmd_decimal(void) + + + This reads a 32-bit decimal value from the command + line with optional leading whitespace. The resulting value + is stored in ao_cmd_lex_u32 and the low 16 bits are stored + in ao_cmd_lex_i; + + + + + ao_match_word + + +uint8_t +ao_match_word(__code char *word) + + + This checks to make sure that 'word' occurs on the command + line. It does not skip leading white space. If 'word' is + found, then 1 is returned. Otherwise, ao_cmd_status is set to + ao_cmd_syntax_error and 0 is returned. + + + + + ao_cmd_init + + +void +ao_cmd_init(void + + + Initializes the command system, setting up the built-in + commands and adding a task to run the command processing + loop. It should be called by 'main' before ao_start_scheduler. + + + + + + + CC1111 USB target device + + The CC1111 contains a full-speed USB target device. It can be + programmed to offer any kind of USB target, but to simplify + interactions with a variety of operating systems, AltOS provides + only a single target device profile, that of a USB modem which + has native drivers for Linux, Windows and Mac OS X. It would be + easy to change the code to provide an alternate target device if + necessary. + + + To the rest of the system, the USB device looks like a simple + two-way byte stream. It can be hooked into the command line + interface if desired, offering control of the device over the + USB link. Alternatively, the functions can be accessed directly + to provide for USB-specific I/O. + + + AltOS USB functions + + ao_usb_flush + + +void +ao_usb_flush(void); + + + Flushes any pending USB output. This queues an 'IN' packet + to be delivered to the USB host if there is pending data, + or if the last IN packet was full to indicate to the host + that there isn't any more pending data available. + + + + + ao_usb_putchar + + +void +ao_usb_putchar(char c); + + + If there is a pending 'IN' packet awaiting delivery to the + host, this blocks until that has been fetched. Then, this + adds a byte to the pending IN packet for delivery to the + USB host. If the USB packet is full, this queues the 'IN' + packet for delivery. + + + + + ao_usb_pollchar + + +char +ao_usb_pollchar(void); + + + If there are no characters remaining in the last 'OUT' + packet received, this returns AO_READ_AGAIN. Otherwise, it + returns the next character, reporting to the host that it + is ready for more data when the last character is gone. + + + + + ao_usb_getchar + + +char +ao_usb_getchar(void); + + + This uses ao_pollchar to receive the next character, + blocking while ao_pollchar returns AO_READ_AGAIN. + + + + + ao_usb_disable + + +void +ao_usb_disable(void); + + + This turns off the USB controller. It will no longer + respond to host requests, nor return characters. Calling + any of the i/o routines while the USB device is disabled + is undefined, and likely to break things. Disabling the + USB device when not needed saves power. + + + Note that neither TeleDongle nor TeleMetrum are able to + signal to the USB host that they have disconnected, so + after disabling the USB device, it's likely that the cable + will need to be disconnected and reconnected before it + will work again. + + + + + ao_usb_enable + + +void +ao_usb_enable(void); + + + This turns the USB controller on again after it has been + disabled. See the note above about needing to physically + remove and re-insert the cable to get the host to + re-initialize the USB link. + + + + + ao_usb_init + + +void +ao_usb_init(void); + + + This turns the USB controller on, adds a task to handle + the control end point and adds the usb I/O functions to + the stdio system. Call this from main before + ao_start_scheduler. + + + + + + + CC1111 Serial peripheral + + The CC1111 provides two USART peripherals. AltOS uses one for + asynch serial data, generally to communicate with a GPS device, + and the other for a SPI bus. The UART is configured to operate + in 8-bits, no parity, 1 stop bit framing. The default + configuration has clock settings for 4800, 9600 and 57600 baud + operation. Additional speeds can be added by computing + appropriate clock values. + + + To prevent loss of data, AltOS provides receive and transmit + fifos of 32 characters each. + + + AltOS serial functions + + ao_serial_getchar + + +char +ao_serial_getchar(void); + + + Returns the next character from the receive fifo, blocking + until a character is received if the fifo is empty. + + + + + ao_serial_putchar + + +void +ao_serial_putchar(char c); + + + Adds a character to the transmit fifo, blocking if the + fifo is full. Starts transmitting characters. + + + + + ao_serial_drain + + +void +ao_serial_drain(void); + + + Blocks until the transmit fifo is empty. Used internally + when changing serial speeds. + + + + + ao_serial_set_speed + + +void +ao_serial_set_speed(uint8_t speed); + + + Changes the serial baud rate to one of + AO_SERIAL_SPEED_4800, AO_SERIAL_SPEED_9600 or + AO_SERIAL_SPEED_57600. This first flushes the transmit + fifo using ao_serial_drain. + + + + + ao_serial_init + + +void +ao_serial_init(void) + + + Initializes the serial peripheral. Call this from 'main' + before jumping to ao_start_scheduler. The default speed + setting is AO_SERIAL_SPEED_4800. + + + + + + + CC1111 Radio peripheral + + The CC1111 radio transceiver sends and receives digital packets + with forward error correction and detection. The AltOS driver is + fairly specific to the needs of the TeleMetrum and TeleDongle + devices, using it for other tasks may require customization of + the driver itself. There are three basic modes of operation: + + + + Telemetry mode. In this mode, TeleMetrum transmits telemetry + frames at a fixed rate. The frames are of fixed size. This + is strictly a one-way communication from TeleMetrum to + TeleDongle. + + + + + Packet mode. In this mode, the radio is used to create a + reliable duplex byte stream between TeleDongle and + TeleMetrum. This is an asymmetrical protocol with + TeleMetrum only transmitting in response to a packet sent + from TeleDongle. Thus getting data from TeleMetrum to + TeleDongle requires polling. The polling rate is adaptive, + when no data has been received for a while, the rate slows + down. The packets are checked at both ends and invalid + data are ignored. + + + On the TeleMetrum side, the packet link is hooked into the + stdio mechanism, providing an alternate data path for the + command processor. It is enabled when the unit boots up in + 'idle' mode. + + + On the TeleDongle side, the packet link is enabled with a + command; data from the stdio package is forwarded over the + packet link providing a connection from the USB command + stream to the remote TeleMetrum device. + + + + + Radio Direction Finding mode. In this mode, TeleMetrum + constructs a special packet that sounds like an audio tone + when received by a conventional narrow-band FM + receiver. This is designed to provide a beacon to track + the device when other location mechanisms fail. + + + + + + AltOS radio functions + + ao_radio_set_telemetry + + +void +ao_radio_set_telemetry(void); + + + Configures the radio to send or receive telemetry + packets. This includes packet length, modulation scheme and + other RF parameters. It does not include the base frequency + or channel though. Those are set at the time of transmission + or reception, in case the values are changed by the user. + + + + + ao_radio_set_packet + + +void +ao_radio_set_packet(void); + + + Configures the radio to send or receive packet data. This + includes packet length, modulation scheme and other RF + parameters. It does not include the base frequency or + channel though. Those are set at the time of transmission or + reception, in case the values are changed by the user. + + + + + ao_radio_set_rdf + + +void +ao_radio_set_rdf(void); + + + Configures the radio to send RDF 'packets'. An RDF 'packet' + is a sequence of hex 0x55 bytes sent at a base bit rate of + 2kbps using a 5kHz deviation. All of the error correction + and data whitening logic is turned off so that the resulting + modulation is received as a 1kHz tone by a conventional 70cm + FM audio receiver. + + + + + ao_radio_idle + + +void +ao_radio_idle(void); + + + Sets the radio device to idle mode, waiting until it reaches + that state. This will terminate any in-progress transmit or + receive operation. + + + + + ao_radio_get + + +void +ao_radio_get(void); + + + Acquires the radio mutex and then configures the radio + frequency using the global radio calibration and channel + values. + + + + + ao_radio_put + + +void +ao_radio_put(void); + + + Releases the radio mutex. + + + + + ao_radio_abort + + +void +ao_radio_abort(void); + + + Aborts any transmission or reception process by aborting the + associated DMA object and calling ao_radio_idle to terminate + the radio operation. + + + + + + AltOS radio telemetry functions + + In telemetry mode, you can send or receive a telemetry + packet. The data from receiving a packet also includes the RSSI + and status values supplied by the receiver. These are added + after the telemetry data. + + + ao_radio_send + + +void +ao_radio_send(__xdata struct ao_telemetry *telemetry); + + + This sends the specific telemetry packet, waiting for the + transmission to complete. The radio must have been set to + telemetry mode. This function calls ao_radio_get() before + sending, and ao_radio_put() afterwards, to correctly + serialize access to the radio device. + + + + + ao_radio_recv + + +void +ao_radio_recv(__xdata struct ao_radio_recv *radio); + + + This blocks waiting for a telemetry packet to be received. + The radio must have been set to telemetry mode. This + function calls ao_radio_get() before receiving, and + ao_radio_put() afterwards, to correctly serialize access + to the radio device. This returns non-zero if a packet was + received, or zero if the operation was aborted (from some + other task calling ao_radio_abort()). + + + + + + AltOS radio direction finding function + + In radio direction finding mode, there's just one function to + use + + + ao_radio_rdf + + +void +ao_radio_rdf(int ms); + + + This sends an RDF packet lasting for the specified amount + of time. The maximum length is 1020 ms. + + + + + + Packet mode functions + + Packet mode is asymmetrical and is configured at compile time + for either master or slave mode (but not both). The basic I/O + functions look the same at both ends, but the internals are + different, along with the initialization steps. + + + ao_packet_putchar + + +void +ao_packet_putchar(char c); + + + If the output queue is full, this first blocks waiting for + that data to be delivered. Then, queues a character for + packet transmission. On the master side, this will + transmit a packet if the output buffer is full. On the + slave side, any pending data will be sent the next time + the master polls for data. + + + + + ao_packet_pollchar + + +char +ao_packet_pollchar(void); + + + This returns a pending input character if available, + otherwise returns AO_READ_AGAIN. On the master side, if + this empties the buffer, it triggers a poll for more data. + + + + + ao_packet_slave_start + + +void +ao_packet_slave_start(void); + + + This is available only on the slave side and starts a task + to listen for packet data. + + + + + ao_packet_slave_stop + + +void +ao_packet_slave_stop(void); + + + Disables the packet slave task, stopping the radio receiver. + + + + + ao_packet_slave_init + + +void +ao_packet_slave_init(void); + + + Adds the packet stdio functions to the stdio package so + that when packet slave mode is enabled, characters will + get send and received through the stdio functions. + + + + + ao_packet_master_init + + +void +ao_packet_master_init(void); + + + Adds the 'p' packet forward command to start packet mode. + + + + + +