From: Keith Packard Date: Wed, 6 Mar 2019 01:25:44 +0000 (-0800) Subject: doc: A few minor edits to telelaunch docs X-Git-Tag: 1.9.1~1^2~108^2 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=6b0754cee625c6e2c19dc70fb5be6cd2f0125d47 doc: A few minor edits to telelaunch docs 3 → three less → fewer transreflexive -> reflective Signed-off-by: Keith Packard --- diff --git a/doc/telelaunch-configuration.inc b/doc/telelaunch-configuration.inc index 0e553405..f5199cc4 100644 --- a/doc/telelaunch-configuration.inc +++ b/doc/telelaunch-configuration.inc @@ -1,6 +1,6 @@ == Configuration - There are 3 things you need to configure identically in each unit + There are three things you need to configure identically in each unit that is part of a TeleLaunch system for wireless communications to succeed. Those are the operating frequency, the callsign, and a key for the AES encryption algorithm. Additionally, each TeleFire unit @@ -115,7 +115,7 @@ Each TeleFire unit needs to be configured with a bank number, and bank numbers should be unique within a given system. For - most systems with 8 or less banks, just use the DIP switch + most systems with 8 or fewer banks, just use the DIP switch on the circuit board inside the TeleFire unit to select the desired bank. Only one switch should be turned on. Switch one means bank one, etc. diff --git a/doc/telelaunch-operation.inc b/doc/telelaunch-operation.inc index 4ad50344..996d16eb 100644 --- a/doc/telelaunch-operation.inc +++ b/doc/telelaunch-operation.inc @@ -55,7 +55,7 @@ The TeleLCO unit should be placed on a table at the Launch Control position. It can be helpful for the LCO (the human(s) too, not just the electronics!) to be provided with some - shade, but the use of transreflexive LCDs for the digit + shade, but the use of reflective LCDs for the digit displays and ultri-bright LEDs make TeleLCO operation reasonable even in direct sunlight.