From: Bdale Garbee Date: Sat, 19 Mar 2011 03:12:39 +0000 (-0600) Subject: Merge branch 'telemini' of ssh://git.gag.com/scm/git/fw/altos into telemini X-Git-Tag: 0.9.3~132 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=5db94e1e230bade966a997aa83165405a9ec9d83;hp=cbb968f5cf03625d453d84dc535758072a2c04c7 Merge branch 'telemini' of ssh://git.gag.com/scm/git/fw/altos into telemini --- diff --git a/ao-bringup/turnon_telemini b/ao-bringup/turnon_telemini index 17416bf0..8f694203 100755 --- a/ao-bringup/turnon_telemini +++ b/ao-bringup/turnon_telemini @@ -19,11 +19,11 @@ else fi echo "TeleMini v0.1 Turn-On and Calibration Program" -echo "Copyright 2010 by Bdale Garbee. Released under GPL v2" +echo "Copyright 2011 by Bdale Garbee. Released under GPL v2" echo echo "Expectations:" -echo "\tTeleMini v0.1 powered from USB" -echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header" +echo "\tTeleMini v0.1 powered from LiPo" +echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header" echo "\t\twith coax from SMA to frequency counter" echo echo -n "TeleMini serial number: " @@ -42,7 +42,7 @@ read FREQ CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` echo "Programming flash with cal value " $CAL_VALUE -$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/stable/telemini-v0.1*.ihx $SERIAL +$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/telemini-v0.1*.ihx $SERIAL echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE echo "Unplug and replug USB, cu to the board, confirm freq and record power"