From: Bdale Garbee <bdale@gag.com>
Date: Wed, 23 Oct 2019 16:41:30 +0000 (-0600)
Subject: doc: add some text to TeleLaunch troubleshooting about SAFE/ARM on TeleFire
X-Git-Tag: 1.9.1~1^2~19
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=1cb529e0532d0a7430487c856bb9b037ff6cea0f

doc: add some text to TeleLaunch troubleshooting about SAFE/ARM on TeleFire
---

diff --git a/doc/telelaunch-troubleshooting.inc b/doc/telelaunch-troubleshooting.inc
index 25c0b819..aa25008d 100644
--- a/doc/telelaunch-troubleshooting.inc
+++ b/doc/telelaunch-troubleshooting.inc
@@ -1,6 +1,16 @@
 [appendix]
 == Troubleshooting
 
+	=== TeleFire Fails to Arm
+
+		If turning the TeleLCO key switch from "SAFE" to "ARM" does
+		not cause the selected TeleFire box to start flashing and
+		sounding its siren, the most likely cause is that the 
+		TeleFire box was left with the local safe/arm switch in the
+		safe position.  The Remote Arm LED on TeleLCO shows the state
+		of the safe/arm switch on the currently selected TeleFire box
+		and can be used to confirm this situation.
+
 	=== Radio Signal Strength
 
 		Each unit in the TeleLaunch system has a debugging feature