From: Keith Packard <keithp@keithp.com>
Date: Fri, 5 May 2017 05:07:51 +0000 (-0700)
Subject: altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)
X-Git-Tag: 1.8~139
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=178d7c0aa32267ea71be2ccff146ea6ff990d7dc

altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)

Connect this pin to GND (pin 3) and TeleMini will come up with N0CALL
at 434.550MHz using the original frequency calibration. Helps recover
from accidental mis-configuration.

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/src/telemini-v3.0/ao_pins.h b/src/telemini-v3.0/ao_pins.h
index 0551e1fc..17cff2ae 100644
--- a/src/telemini-v3.0/ao_pins.h
+++ b/src/telemini-v3.0/ao_pins.h
@@ -67,6 +67,13 @@
 #define HAS_IGNITE_REPORT	1
 #define AO_SMALL_ALTITUDE_TABLE	1
 
+/* Use debug connector clock for recovery mode */
+#define HAS_FORCE_FREQ		1
+#define AO_RECOVERY_PORT	(&stm_gpioa)
+#define AO_RECOVERY_PIN		14
+#define AO_RECOVERY_VALUE	0
+#define AO_RECOVERY_MODE	AO_EXTI_MODE_PULL_UP
+
 /* Beeper is on Tim1 CH3 */
 #define BEEPER_CHANNEL		4
 #define BEEPER_TIMER		2
diff --git a/src/telemini-v3.0/ao_telemini.c b/src/telemini-v3.0/ao_telemini.c
index ecd16dd2..a50268b9 100644
--- a/src/telemini-v3.0/ao_telemini.c
+++ b/src/telemini-v3.0/ao_telemini.c
@@ -19,9 +19,26 @@
 #include <ao.h>
 #include <ao_exti.h>
 
+static void
+ao_check_recovery(void)
+{
+	int	i;
+	ao_enable_input(AO_RECOVERY_PORT, AO_RECOVERY_PIN, AO_RECOVERY_MODE);
+	for (i = 0; i < 100; i++)
+		ao_arch_nop();
+	if (ao_gpio_get(AO_RECOVERY_PORT, AO_RECOVERY_PIN, AO_RECOVERY) == AO_RECOVERY_VALUE) {
+		ao_flight_force_idle = 1;
+		ao_force_freq = 1;
+	}
+	ao_gpio_set_mode(AO_RECOVERY_PORT, AO_RECOVERY_PIN, 0);
+	ao_disable_port(AO_RECOVERY_PORT);
+}
+
 void
 main(void)
 {
+	ao_check_recovery();
+
 	ao_clock_init();
 	ao_task_init();
 	ao_timer_init();