From: Keith Packard Date: Mon, 12 Jul 2021 17:00:30 +0000 (-0700) Subject: doc: telemini force freq is pin 6, not 7 X-Git-Tag: 1.9.8~1^2~47 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=0232784711f1f26f1972142920375e2e24ab1e2e doc: telemini force freq is pin 6, not 7 Telemini debug connector has only 6 pins Signed-off-by: Keith Packard --- diff --git a/doc/telemini.inc b/doc/telemini.inc index 7dd04bf0..97bca72b 100644 --- a/doc/telemini.inc +++ b/doc/telemini.inc @@ -136,8 +136,8 @@ callsign settings are, you can temporarily force it back to the original default values (frequency 434.550MHz, callsign N0CALL) by connecting a wire - between hole 3 and hole 7 on the debug connector. Hole - 3 has the square pad around it, hole 7 is the one + between hole 3 and hole 6 on the debug connector. Hole + 3 has the square pad around it, hole 6 is the one nearest the MS5607 baro sensor, which is a rectangular component with a metal cap that has two holes in it.