altos: various cc115l driver hacks

Try to recover from TX_FIFO_UNDERFLOW by resetting the chip at idle
time.

Do a calibration phase during setup.

Program power to ramp up to limit key down noise.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/src/drivers/ao_cc115l.c b/src/drivers/ao_cc115l.c
index 56afc3c75229c98aed314f1a92eca82ae4b6ed69..0fa1e899044a23fae470cbaa7ac1b9a657b84014 100644 (file)
--- a/src/drivers/ao_cc115l.c
+++ b/src/drivers/ao_cc115l.c
@@ -245,6 +245,8 @@ ao_radio_idle(void)
                uint8_t state = ao_radio_strobe(CC115L_SIDLE);
                if ((state >> CC115L_STATUS_STATE) == CC115L_STATUS_STATE_IDLE)
                        break;
+               if ((state >> CC115L_STATUS_STATE) == CC115L_STATUS_STATE_TX_FIFO_UNDERFLOW)
+                       ao_radio_strobe(CC115L_SFTX);
        }
        /* Flush any pending TX bytes */
        ao_radio_strobe(CC115L_SFTX);
@@ -476,6 +478,8 @@ ao_radio_setup(void)
 
        ao_config_get();
 
+       ao_radio_strobe(CC115L_SCAL);
+
        ao_radio_configured = 1;
 }
 
@@ -494,7 +498,6 @@ static void
 ao_radio_get(void)
 {
        static uint32_t last_radio_setting;
-       static uint8_t  last_power_setting;
 
        ao_mutex_get(&ao_radio_mutex);
        if (!ao_radio_configured)
@@ -505,10 +508,6 @@ ao_radio_get(void)
                ao_radio_reg_write(CC115L_FREQ0, ao_config.radio_setting);
                last_radio_setting = ao_config.radio_setting;
        }
-       if (ao_config.radio_power != last_power_setting) {
-               ao_radio_reg_write(CC115L_PA, ao_config.radio_power);
-               last_power_setting = ao_config.radio_power;
-       }
 }
 
 static void
@@ -614,6 +613,20 @@ ao_radio_rdf_abort(void)
        ao_wakeup(&ao_radio_wake);
 }
 
+#define POWER_STEP     0x08
+
+static void
+ao_radio_stx(void)
+{
+       uint8_t power;
+       ao_radio_pa_on();
+       ao_radio_reg_write(CC115L_PA, 0);
+       ao_radio_strobe(CC115L_STX);
+       for (power = POWER_STEP; power < ao_config.radio_power; power += POWER_STEP)
+               ao_radio_reg_write(CC115L_PA, power);
+       ao_radio_reg_write(CC115L_PA, ao_config.radio_power);
+}
+
 static void
 ao_radio_test_cmd(void)
 {
@@ -633,11 +646,10 @@ ao_radio_test_cmd(void)
                ao_packet_slave_stop();
 #endif
                ao_radio_get();
-               ao_radio_set_len(0xff);
-               ao_radio_set_mode(AO_RADIO_MODE_RDF|AO_RADIO_MODE_BITS_FIXED);
                ao_radio_strobe(CC115L_SFTX);
-               ao_radio_pa_on();
-               ao_radio_strobe(CC115L_STX);
+               ao_radio_set_len(0xff);
+               ao_radio_set_mode(AO_RADIO_MODE_RDF);
+               ao_radio_stx();
                radio_on = 1;
        }
        if (mode == 3) {
@@ -740,6 +752,10 @@ _ao_radio_send_lots(ao_radio_fill_func fill, uint8_t mode)
        uint8_t fifo_space;
 
        fifo_space = CC115L_FIFO_SIZE;
+       ao_radio_abort = 0;
+
+       ao_radio_strobe(CC115L_SFTX);
+
        ao_radio_done = 0;
        ao_radio_fifo = 0;
        while (!done) {
@@ -786,8 +802,7 @@ _ao_radio_send_lots(ao_radio_fill_func fill, uint8_t mode)
                        ao_exti_enable(AO_CC115L_DONE_INT_PORT, AO_CC115L_DONE_INT_PIN);
 
                        if (!started) {
-                               ao_radio_pa_on();
-                               ao_radio_strobe(CC115L_STX);
+                               ao_radio_stx();
                                started = 1;
                        }
                }