summary |
shortlog |
log |
commit | commitdiff |
tree
raw |
patch |
inline | side by side (from parent 1:
1812adb)
ao-dbg.1 and ao-eeprom.1
Signed-off-by: Keith Packard <keithp@keithp.com>
one of the available devices.
.SH COMMANDS
Once started, ao-dbg connects to the cc1111 and then reads and
one of the available devices.
.SH COMMANDS
Once started, ao-dbg connects to the cc1111 and then reads and
-executes commands, either from stdin, or the nework connection to
+executes commands, either from stdin, or the network connection to
sdcdb.
.PP
Unlike the command line, ao-dbg contains built-in help for each of these
sdcdb.
.PP
Unlike the command line, ao-dbg contains built-in help for each of these
> set sfr 0x90 0x00 # set P1_1 to low
.IP "Reading the A/D converters"
The six A/D converter inputs can each be connected to any of the P0 pins,
> set sfr 0x90 0x00 # set P1_1 to low
.IP "Reading the A/D converters"
The six A/D converter inputs can each be connected to any of the P0 pins,
-ground, the A/D voltage refernece, an internal temperature sensor or VDD/3.
+ground, the A/D voltage reference, an internal temperature sensor or VDD/3.
To read one of these values, select an A/D converter to use then start the
conversion process. The cc1111 manual has the table for selecting the input
on page 144.
To read one of these values, select an A/D converter to use then start the
conversion process. The cc1111 manual has the table for selecting the input
on page 144.
.SH USAGE
.I ao-eeprom
connects to the specified target device and dumps each block of the
.SH USAGE
.I ao-eeprom
connects to the specified target device and dumps each block of the
-eeprom to stdout in hexidecimal bytes.
+eeprom to stdout in hexadecimal bytes.