altos: spiradio debug serial is port 1, not port 0

The SPI link uses port 0; it seems like the having the two try to
share the same wires is a bad plan.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/src/spiradio-v0.1/ao_pins.h b/src/spiradio-v0.1/ao_pins.h
index 363eafa490804c20ec32f50f239d5b6a3907b9ed..f38aade6c6ec5ac7ba8ed4981a608c6bef8f7543 100644 (file)
--- a/src/spiradio-v0.1/ao_pins.h
+++ b/src/spiradio-v0.1/ao_pins.h
@@ -24,12 +24,15 @@
 #define HAS_USB                        0
 #define HAS_BEEP               0
 #define HAS_GPS                        0
 #define HAS_USB                        0
 #define HAS_BEEP               0
 #define HAS_GPS                        0

-#define HAS_SERIAL_0           1
-#define HAS_SERIAL_0_ALT_1     1
+#define HAS_SERIAL_0           0
+#define HAS_SERIAL_0_ALT_1     0

 #define HAS_SERIAL_0_HW_FLOW   0
 #define HAS_SERIAL_0_HW_FLOW   0

-#define USE_SERIAL_0_STDIN     1
-#define DELAY_SERIAL_0_STDIN   0
-#define HAS_SERIAL_1           0
+#define USE_SERIAL_0_STDIN     0
+#define HAS_SERIAL_1           1
+#define HAS_SERIAL_1_ALT_1     1
+#define HAS_SERIAL_1_HW_FLOW   0
+#define USE_SERIAL_1_STDIN     1
+#define DELAY_SERIAL_1_STDIN   0

 #define HAS_ADC                        0
 #define HAS_DBG                        0
 #define HAS_EEPROM             0
 #define HAS_ADC                        0
 #define HAS_DBG                        0
 #define HAS_EEPROM             0


@@ -38,8 +41,8 @@
 #define DBG_ON_P1              0
 #define PACKET_HAS_MASTER      0
 #define PACKET_HAS_SLAVE       0
 #define DBG_ON_P1              0
 #define PACKET_HAS_MASTER      0
 #define PACKET_HAS_SLAVE       0

-#define AO_LED_RED             2
-#define AO_LED_GREEN           1
+#define AO_LED_RED             1
+#define AO_LED_GREEN           2

 #define LEDS_AVAILABLE         (AO_LED_RED|AO_LED_GREEN)
 #define HAS_EXTERNAL_TEMP      0
 #define HAS_ACCEL_REF          0
 #define LEDS_AVAILABLE         (AO_LED_RED|AO_LED_GREEN)
 #define HAS_EXTERNAL_TEMP      0
 #define HAS_ACCEL_REF          0