+altos (1.8.6-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * add a paragraph to the intro pointing to the altusmetrum email list
+ * another second seems to help on the very slow Acer laptop
+ * add a warning about Google limiting per-day access until/unless we pay
+ * altos/fox: rename fox product
+ * move signal that forces flash-loader on to PB8, active high
+ * had the sense backwards .. presence of 'attached' should put us in the loader
+ * add a turnon script for TeleLCO v2.0
+ * add telefireeight-v1.0 to products built by default in src/Makefile
+ * releasing 1.8.6
+
+ [ Keith Packard ]
+ * altos/ao_cc1120: Only call ao_packet_slave_stop when HAS_SLAVE
+ * altos: Hack up code for TeleMetrum to make it just a tracker
+ * micropeak: Make reported 'max height' value show filtered max height
+ * altosdroid: Attempt to avoid some reported altosdroid crashes
+ * doc: add release check for altusmetrum-docinfo.xml copyright
+ * altos/stm: Simplify ao_usb_write a bit
+ * altos: Use max of 64 previous orient values when checking pyro limits
+ * altos/flash-loader: On STM, don't include ao_usb_disable
+ * Set version to 1.8.5.1
+ * altoslib: Clarify terms in Mega pyro config
+ * altoslib: Remove ascending/descending from pyro config
+ * altoslib: Flush settings restoration commands after accel cal
+ * altoslib: Keep config data accel cal in antenna up form.
+ * altoslib: Fix data fetching during flashing of cc1111-based devices
+ * altos/fox: Add fox1ihu bringup firmware
+ * altos/fox: Initialize FOX adc
+ * altos/fox: Fix up Fox ADC bits
+ * altos/fox: Provide names for fox ADC channels
+ * altos/fox: Turn on all of the fox lights
+ * altos/fox: Add watchdog timer
+ * altos/fox: Enable M25 driver for MRAM.
+ * altos/fox: Add MRAM and SD card drivers
+ * altos/fox: Add fox1ihu flash loader
+ * altos/fox: Run app when PD6 is low
+ * altos/fox: update product name to show v2, enable watchdog by default
+ * altos/fox: Transition to current altos build environment
+ * altos/fox: Update ADC to fox-1 IHU Revision 2
+ * altos/fox: Enable system timer in flash loader and prod watchdog with it
+ * altos: Build fox1ihu by default
+ * Remove ao_radio_cal from stm products without radios
+ * altos/fox1ihu: Pull down radio control pin in flash loader
+ * altoslib: Fix Idle Monitor on TeleMega v3
+ * altos/stmf0: Change tests for AO_BOOT_CHAIN and AO_BOOT_PIN to #if
+ * altos/stmf0: whitespace fix
+ * altos/stmf0: Set 0x0 mapping to Main Flash for boot loader
+ * ao-bringup/turnon_telemini: Skip DFU if no DFU device is present
+ * altos/kernel: Define usb IN2/IN3 functions
+ * altos/kernel: Add USB descriptors for IN3
+ * altos/stmf0: Toggle IN2 SW_BUF bit when sending data
+ * altos/stmf0: Add IN3 alternate endpoint support
+ * altos/stmf0: Fix up USB debug code
+ * altos/chaoskey-v1.0: Add endpoint for reading flash contents
+ * ao-chaosread: Add support for the new flash endpoint in chaoskey
+ * Update version to 1.8.5.2
+ * altos: Eliminate height requirement for coast detect
+ * altos/test: Replace state name with 10* state value in test log. Fix raw speed
+ * doc: Update pyro channel info to reflect UI changes
+ * altos: Add µPusb v3.0 project
+ * altos/stmf0: leave ao_power_gpio names undefined without power management
+ * altos/mpusb-v3.0: Make it compile again
+ * altos: add 'vidtime', a simple brightness monitor
+ * altos/vidtime: Check for value change in normal code, not irq
+ * altos: Add TeleLCO v2.0 product
+ * altos/stm: Add per-LED port/pin mode in LED code
+ * altos/drivers: Pads with multi-port firing and pad selector DIP switch
+ * altos: Add TeleFireEight v1.0 product
+ * altos/telelco-v2: Change select button to alternate box/pad mode
+ * altos/ao_button.c: Support up to 16 buttons
+ * altos/telelco-v2.0: Only switch encoder mode on push, not release
+ * altos/drivers: Make quadrature debounce longer by default. Fix state tracking
+ * altos/telelco-v2.0: Reduce quadrature debounce time
+ * altos/driver: Add support for one-step-per-click quadrature encoder
+ * altos/telelco-v2.0: Use single-step quadrature code
+ * altos/telelco-v2.0: Only look at drag select presses, not releases
+ * altos/telelco-v2.0: Mixed up the select_button pin (is E0, was set to E13)
+ * altos/telelco-v2.0: Fix button names and pin mappings. Add drag LED.
+ * altos/telelco-v2.0: A bit fancier with the drag-mode LED show
+ * altos/telelco-v2.0: Add debug output for pad voltage display
+ * altos/telelco-v2.0: Change drag race selected/no-continutity pattern
+ * altos/stm: Add polling ADC sampler API
+ * altos/telelco-v2.0: Display local batt voltage at startup
+ * altos/stm: Enable HSI timer when HAS_ADC_SINGLE is set
+ * altos/telelco-v2.0: Set HAS_ADC_SINGLE to enable HSI timer
+ * altoslib: Revert field name changes for accel cal values
+ * altos/telefireeight-v1.0: Fix ADC definitions
+ * altos/telefire*: Do voltage tests in decivolts instead of ADC units
+ * altos/telelco-v2.0: Test displays at power on
+ * altos/telelco: Remove STATIC_TEST code from stand-alone LCO boxes
+ * altos/stm: Remove unused ADC names from ao_adc_single_stm.c
+ * altos/stm: Define ADC channels for TEMP and V_REF
+ * ao-bringup: Find dfu-util in $PATH for chaoskey
+ * altos/telelco-v0: Test display, show batt voltage at boot
+ * altos/driver: Improve quadrature debouncing for mechanical encoders
+ * altos/telelco-v0.2-cc1200: Add build for NAR hacked TeleLCO v0.2 board
+ * altos/telelco-v2.0: Fix AO_ADC_DUMP
+ * Bump version to 1.8.6
+ * altos/stm: Let products override AO_LED_TYPE for stm processors
+ * altos/ao_pad: Use AO_LED_TYPE for computing active LEDs.
+ * altos/ao_pad: Turn on all LEDs for a moment at power up
+ * altos/ao_pad: Move LED test to the monitor task
+ * altos/telelco-v2.0: Do all drag race beeping from the beeping thread
+ * altosuilib: Split cc1111 vs arm telefire/telemini for flashing
+ * altos/test: Compute and show height error tracker in ao_flight_test
+ * altos: Share common LCO functions in ao_lco_bits.c
+ * altos: Build telelco-v2.0 by default
+ * altos: A bit more LCO code sharing
+ * altos: Fix telelcotwo build for new ao_lco_bits.c file
+ * altos: Fix LCO display while searching
+ * altos: Make LCO search directly drive pad/box displays
+ * altos: Make fewer LCO variables public
+ * altos: Fetch current quadrature status at startup time
+ * altoslib: Make stop_remote delay depend on the data rate
+ * ao-tools/ao-dumplog: Dump entire eeprom contents
+ * altos: Change 'after motor' pyro check to be >= instead of ==
+ * altos/stm-demo: Set up for dumping eeprom
+ * altos/plottest: Make linewidth bigger
+ * altos: Add separate 'ao_launch_tick'. Use in pyro and lockout.
+ * Update docs for 1.8.6
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 05 Aug 2018 11:25:17 +0800
+
altos (1.8.5-1) unstable; urgency=medium
[ Bdale Garbee ]
projects / fw / altos / commitdiff