altos: Add telelco-v0.2 project
authorKeith Packard <keithp@keithp.com>
Mon, 29 Apr 2013 06:09:54 +0000 (23:09 -0700)
committerKeith Packard <keithp@keithp.com>
Wed, 8 May 2013 03:07:52 +0000 (20:07 -0700)
Signed-off-by: Keith Packard <keithp@keithp.com>
src/telelco-v0.2/Makefile [new file with mode: 0644]
src/telelco-v0.2/ao_lco.c [new file with mode: 0644]
src/telelco-v0.2/ao_lco.h [new file with mode: 0644]
src/telelco-v0.2/ao_pins.h [new file with mode: 0644]
src/telelco-v0.2/ao_telelco.c [new file with mode: 0644]
src/telelco-v0.2/flash-loader/Makefile [new file with mode: 0644]
src/telelco-v0.2/flash-loader/ao_pins.h [new file with mode: 0644]

diff --git a/src/telelco-v0.2/Makefile b/src/telelco-v0.2/Makefile
new file mode 100644 (file)
index 0000000..582dbd0
--- /dev/null
@@ -0,0 +1,102 @@
+#
+# AltOS build for TeleLCO
+#
+#
+
+include ../stm/Makefile.defs
+
+INC = \
+       ao.h \
+       ao_arch.h \
+       ao_arch_funcs.h \
+       ao_companion.h \
+       ao_data.h \
+       ao_sample.h \
+       ao_pins.h \
+       ao_product.h \
+       ao_seven_segment.h \
+       ao_lco.h \
+       ao_lco_cmd.h \
+       ao_lco_func.h \
+       ao_radio_spi.h \
+       ao_radio_cmac.h \
+       stm32l.h
+
+#
+# Common AltOS sources
+#
+
+#PROFILE=ao_profile.c
+#PROFILE_DEF=-DAO_PROFILE=1
+
+ALTOS_SRC = \
+       ao_boot_chain.c \
+       ao_interrupt.c \
+       ao_product.c \
+       ao_romconfig.c \
+       ao_cmd.c \
+       ao_config.c \
+       ao_task.c \
+       ao_led.c \
+       ao_stdio.c \
+       ao_panic.c \
+       ao_timer.c \
+       ao_mutex.c \
+       ao_freq.c \
+       ao_dma_stm.c \
+       ao_spi_stm.c \
+       ao_beep_stm.c \
+       ao_storage.c \
+       ao_eeprom_stm.c \
+       ao_lcd_stm.c \
+       ao_usb_stm.c \
+       ao_exti_stm.c \
+       ao_cc1120.c \
+       ao_radio_cmac.c \
+       ao_aes.c \
+       ao_aes_tables.c \
+       ao_fec_tx.c \
+       ao_fec_rx.c \
+       ao_seven_segment.c \
+       ao_quadrature.c \
+       ao_button.c \
+       ao_event.c \
+       ao_lco.c \
+       ao_lco_cmd.c \
+       ao_lco_func.c \
+       ao_radio_cmac_cmd.c
+
+PRODUCT=TeleLCO-v0.2
+PRODUCT_DEF=-DTELEMEGA
+IDPRODUCT=0x0023
+
+CFLAGS = $(PRODUCT_DEF) $(STM_CFLAGS) $(PROFILE_DEF) -Os -g
+
+PROGNAME=telelco-v0.2
+PROG=$(PROGNAME)-$(VERSION).elf
+
+SRC=$(ALTOS_SRC) ao_telelco.c
+OBJ=$(SRC:.c=.o)
+
+all: $(PROG)
+
+$(PROG): Makefile $(OBJ) altos.ld
+       $(call quiet,CC) $(LDFLAGS) $(CFLAGS) -o $(PROG) $(OBJ) $(SAT_CLIB) -lgcc
+
+../altitude.h: make-altitude
+       nickle $< > $@
+
+$(OBJ): $(INC)
+
+ao_product.h: ao-make-product.5c ../Version
+       $(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@
+
+distclean:     clean
+
+clean:
+       rm -f *.o $(PROGNAME)-*.elf
+       rm -f ao_product.h
+
+install:
+
+uninstall:
diff --git a/src/telelco-v0.2/ao_lco.c b/src/telelco-v0.2/ao_lco.c
new file mode 100644 (file)
index 0000000..418c050
--- /dev/null
@@ -0,0 +1,396 @@
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <ao.h>
+#include <ao_lco.h>
+#include <ao_event.h>
+#include <ao_seven_segment.h>
+#include <ao_quadrature.h>
+#include <ao_lco_func.h>
+#include <ao_radio_cmac.h>
+
+#define DEBUG  1
+
+#if DEBUG
+static uint8_t ao_lco_debug;
+#define PRINTD(...) do { if (!ao_lco_debug) break; printf ("\r%5u %s: ", ao_tick_count, __func__); printf(__VA_ARGS__); flush(); } while(0)
+#else
+#define PRINTD(...) 
+#endif
+
+#define AO_LCO_PAD_DIGIT       0
+#define AO_LCO_BOX_DIGIT_1     1
+#define AO_LCO_BOX_DIGIT_10    2
+
+static uint8_t ao_lco_min_box, ao_lco_max_box;
+static uint8_t ao_lco_mutex;
+static uint8_t ao_lco_pad;
+static uint8_t ao_lco_box;
+static uint8_t ao_lco_armed;
+static uint8_t ao_lco_firing;
+static uint8_t ao_lco_valid;
+static uint8_t ao_lco_got_channels;
+static uint16_t        ao_lco_tick_offset;
+
+static struct ao_pad_query     ao_pad_query;
+
+static void
+ao_lco_set_pad(void)
+{
+       ao_seven_segment_set(AO_LCO_PAD_DIGIT, ao_lco_pad + 1);
+}
+
+static void
+ao_lco_set_box(void)
+{
+       ao_seven_segment_set(AO_LCO_BOX_DIGIT_1, ao_lco_box % 10);
+       ao_seven_segment_set(AO_LCO_BOX_DIGIT_10, ao_lco_box / 10);
+}
+
+#define MASK_SIZE(n)   (((n) + 7) >> 3)
+#define MASK_ID(n)     ((n) >> 3)
+#define MASK_SHIFT(n)  ((n) & 7)
+
+static uint8_t ao_lco_box_mask[MASK_SIZE(AO_PAD_MAX_BOXES)];
+
+static uint8_t
+ao_lco_box_present(uint8_t box)
+{
+       if (box >= AO_PAD_MAX_BOXES)
+               return 0;
+       return (ao_lco_box_mask[MASK_ID(box)] >> MASK_SHIFT(box)) & 1;
+}
+
+static uint8_t
+ao_lco_pad_present(uint8_t pad)
+{
+       if (!ao_lco_got_channels || !ao_pad_query.channels)
+               return pad == 0;
+       if (pad >= AO_PAD_MAX_CHANNELS)
+               return 0;
+       return (ao_pad_query.channels >> pad) & 1;
+}
+
+static uint8_t
+ao_lco_pad_first(void)
+{
+       uint8_t pad;
+
+       for (pad = 0; pad < AO_PAD_MAX_CHANNELS; pad++)
+               if (ao_lco_pad_present(pad))
+                       return pad;
+       return 0;
+}
+
+static void
+ao_lco_input(void)
+{
+       static struct ao_event  event;
+       int8_t  dir, new_box, new_pad;
+
+       ao_beep_for(AO_BEEP_MID, AO_MS_TO_TICKS(200));
+       ao_lco_set_pad();
+       ao_lco_set_box();
+       for (;;) {
+               ao_event_get(&event);
+               PRINTD("event type %d unit %d value %d\n",
+                      event.type, event.unit, event.value);
+               switch (event.type) {
+               case AO_EVENT_QUADRATURE:
+                       switch (event.unit) {
+                       case AO_QUADRATURE_PAD:
+                               if (!ao_lco_armed) {
+                                       if (event.value == ao_lco_pad)
+                                               break;
+                                       dir = ((int8_t) event.value - (int8_t) ao_lco_pad) > 0 ? 1 : -1;
+                                       new_pad = event.value;
+                                       while (!ao_lco_pad_present(new_pad)) {
+                                               new_pad += dir;
+                                               if (new_pad > AO_PAD_MAX_CHANNELS)
+                                                       new_pad = 0;
+                                               else if (new_pad < 0)
+                                                       new_pad = AO_PAD_MAX_CHANNELS - 1;
+                                               if (new_pad == ao_lco_pad)
+                                                       break;
+                                       }
+                                       if (new_pad != ao_lco_pad) {
+                                               ao_lco_pad = new_pad;
+                                               ao_quadrature_count[AO_QUADRATURE_PAD] = ao_lco_pad;
+                                               ao_lco_set_pad();
+                                       }
+                               }
+                               break;
+                       case AO_QUADRATURE_BOX:
+                               if (!ao_lco_armed) {
+                                       if (event.value == ao_lco_box)
+                                               break;
+                                       dir = ((int8_t) event.value - (int8_t) ao_lco_box) > 0 ? 1 : -1;
+                                       new_box = event.value;
+                                       while (!ao_lco_box_present(new_box)) {
+                                               new_box += dir;
+                                               if (new_box > ao_lco_max_box)
+                                                       new_box = ao_lco_min_box;
+                                               else if (new_box < ao_lco_min_box)
+                                                       new_box = ao_lco_min_box;
+                                               if (new_box == ao_lco_box)
+                                                       break;
+                                       }
+                                       ao_quadrature_count[AO_QUADRATURE_PAD] = new_box;
+                                       if (ao_lco_box != new_box) {
+                                               ao_lco_box = new_box;
+                                               ao_lco_got_channels = 0;
+                                               ao_lco_set_box();
+                                       }
+                               }
+                               break;
+                       }
+                       break;
+               case AO_EVENT_BUTTON:
+                       switch (event.unit) {
+                       case AO_BUTTON_ARM:
+                               ao_lco_armed = event.value;
+                               PRINTD("Armed %d\n", ao_lco_armed);
+                               ao_wakeup(&ao_lco_armed);
+                               break;
+                       case AO_BUTTON_FIRE:
+                               if (ao_lco_armed) {
+                                       ao_lco_firing = event.value;
+                                       PRINTD("Firing %d\n", ao_lco_firing);
+                                       ao_wakeup(&ao_lco_armed);
+                               }
+                               break;
+                       }
+                       break;
+               }
+       }
+}
+
+static AO_LED_TYPE     continuity_led[AO_LED_CONTINUITY_NUM] = {
+#ifdef AO_LED_CONTINUITY_0
+       AO_LED_CONTINUITY_0,
+#endif
+#ifdef AO_LED_CONTINUITY_1
+       AO_LED_CONTINUITY_1,
+#endif
+#ifdef AO_LED_CONTINUITY_2
+       AO_LED_CONTINUITY_2,
+#endif
+#ifdef AO_LED_CONTINUITY_3
+       AO_LED_CONTINUITY_3,
+#endif
+#ifdef AO_LED_CONTINUITY_4
+       AO_LED_CONTINUITY_4,
+#endif
+#ifdef AO_LED_CONTINUITY_5
+       AO_LED_CONTINUITY_5,
+#endif
+#ifdef AO_LED_CONTINUITY_6
+       AO_LED_CONTINUITY_6,
+#endif
+#ifdef AO_LED_CONTINUITY_7
+       AO_LED_CONTINUITY_7,
+#endif
+};
+
+static void
+ao_lco_update(void)
+{
+       int8_t                  r;
+       uint8_t                 c;
+
+       r = ao_lco_query(ao_lco_box, &ao_pad_query, &ao_lco_tick_offset);
+       if (r == AO_RADIO_CMAC_OK) {
+               c = ao_lco_got_channels;
+               ao_lco_got_channels = 1;
+               ao_lco_valid = 1;
+               if (!c) {
+                       ao_lco_pad = ao_lco_pad_first();
+                       ao_lco_set_pad();
+               }
+       } else
+               ao_lco_valid = 0;
+
+#if 0
+       PRINTD("lco_query success arm_status %d i0 %d i1 %d i2 %d i3 %d\n",
+              query.arm_status,
+              query.igniter_status[0],
+              query.igniter_status[1],
+              query.igniter_status[2],
+              query.igniter_status[3]);
+#endif
+
+       ao_wakeup(&ao_pad_query);
+}
+
+static void
+ao_lco_box_set_present(uint8_t box)
+{
+       if (box >= AO_PAD_MAX_BOXES)
+               return;
+       ao_lco_box_mask[MASK_ID(box)] |= 1 << MASK_SHIFT(box);
+}
+
+static void
+ao_lco_search(void)
+{
+       uint16_t        tick_offset;
+       int8_t          r;
+
+       ao_lco_min_box = 0xff;
+       ao_lco_max_box = 0x00;
+       for (ao_lco_box = 0; ao_lco_box < AO_PAD_MAX_BOXES; ao_lco_box++) {
+               if ((ao_lco_box % 10) == 0)
+                       ao_lco_set_box();
+               r = ao_lco_query(ao_lco_box, &ao_pad_query, &ao_lco_tick_offset);
+               if (r == AO_RADIO_CMAC_OK) {
+                       if (ao_lco_box < ao_lco_min_box)
+                               ao_lco_min_box = ao_lco_box;
+                       if (ao_lco_box > ao_lco_max_box)
+                               ao_lco_max_box = ao_lco_box;
+                       ao_lco_box_set_present(ao_lco_box);
+               }
+       }
+       if (ao_lco_min_box <= ao_lco_max_box)
+               ao_lco_box = ao_lco_min_box;
+       else
+               ao_lco_min_box = ao_lco_max_box = ao_lco_box = 0;
+       ao_lco_valid = 0;
+       ao_lco_got_channels = 0;
+       ao_lco_pad = 0;
+}
+
+static void
+ao_lco_igniter_status(void)
+{
+       uint8_t         c;
+       uint16_t        delay;
+
+       for (;;) {
+//             ao_alarm(delay);
+               ao_sleep(&ao_pad_query);
+//             ao_clear_alarm();
+               if (!ao_lco_valid) {
+                       ao_led_on(AO_LED_RED);
+                       ao_led_off(AO_LED_GREEN|AO_LED_AMBER);
+                       continue;
+               }
+               PRINTD("RSSI %d\n", ao_radio_cmac_rssi);
+               if (ao_radio_cmac_rssi < -90) {
+                       ao_led_on(AO_LED_AMBER);
+                       ao_led_off(AO_LED_RED|AO_LED_GREEN);
+               } else {
+                       ao_led_on(AO_LED_GREEN);
+                       ao_led_off(AO_LED_RED|AO_LED_AMBER);
+               }
+               if (ao_pad_query.arm_status)
+                       ao_led_on(AO_LED_REMOTE_ARM);
+               else
+                       ao_led_off(AO_LED_REMOTE_ARM);
+               for (c = 0; c < AO_LED_CONTINUITY_NUM; c++) {
+                       uint8_t status;
+
+                       if (ao_pad_query.channels & (1 << c))
+                               status = ao_pad_query.igniter_status[c];
+                       else
+                               status = AO_PAD_IGNITER_STATUS_NO_IGNITER_RELAY_OPEN;
+                       if (status == AO_PAD_IGNITER_STATUS_GOOD_IGNITER_RELAY_OPEN)
+                               ao_led_on(continuity_led[c]);
+                       else
+                               ao_led_off(continuity_led[c]);
+               }
+       }
+}
+
+static void
+ao_lco_arm_warn(void)
+{
+       for (;;) {
+               while (!ao_lco_armed)
+                       ao_sleep(&ao_lco_armed);
+               ao_beep_for(AO_BEEP_MID, AO_MS_TO_TICKS(200));
+               ao_delay(AO_MS_TO_TICKS(200));
+       }
+}
+
+static struct ao_task ao_lco_input_task;
+static struct ao_task ao_lco_monitor_task;
+static struct ao_task ao_lco_arm_warn_task;
+static struct ao_task ao_lco_igniter_status_task;
+
+static void
+ao_lco_monitor(void)
+{
+       uint16_t                delay;
+
+       ao_lco_search();
+       ao_add_task(&ao_lco_input_task, ao_lco_input, "lco input");
+       ao_add_task(&ao_lco_arm_warn_task, ao_lco_arm_warn, "lco arm warn");
+       ao_add_task(&ao_lco_igniter_status_task, ao_lco_igniter_status, "lco igniter status");
+       for (;;) {
+               PRINTD("monitor armed %d firing %d offset %d\n",
+                      ao_lco_armed, ao_lco_firing, ao_lco_tick_offset);
+
+               if (ao_lco_armed && ao_lco_firing) {
+                       PRINTD("Firing box %d pad %d: valid %d\n",
+                              ao_lco_box, ao_lco_pad, ao_lco_valid);
+                       if (!ao_lco_valid)
+                               ao_lco_update();
+                       if (ao_lco_valid)
+                               ao_lco_ignite(ao_lco_box, 1 << ao_lco_pad, ao_lco_tick_offset);
+               } else if (ao_lco_armed) {
+                       PRINTD("Arming box %d pad %d\n",
+                              ao_lco_box, ao_lco_pad);
+                       if (!ao_lco_valid)
+                               ao_lco_update();
+                       ao_lco_arm(ao_lco_box, 1 << ao_lco_pad, ao_lco_tick_offset);
+                       ao_lco_update();
+               } else {
+                       ao_lco_update();
+               }
+               if (ao_lco_armed && ao_lco_firing)
+                       delay = AO_MS_TO_TICKS(100);
+               else
+                       delay = AO_SEC_TO_TICKS(1);
+               ao_alarm(delay);
+               ao_sleep(&ao_lco_armed);
+               ao_clear_alarm();
+       }
+}
+
+#if DEBUG
+void
+ao_lco_set_debug(void)
+{
+       ao_cmd_decimal();
+       if (ao_cmd_status == ao_cmd_success)
+               ao_lco_debug = ao_cmd_lex_i != 0;
+}
+
+__code struct ao_cmds ao_lco_cmds[] = {
+       { ao_lco_set_debug,     "D <0 off, 1 on>\0Debug" },
+       { 0, NULL }
+};
+#endif
+
+void
+ao_lco_init(void)
+{
+       ao_add_task(&ao_lco_monitor_task, ao_lco_monitor, "lco monitor");
+#if DEBUG
+       ao_cmd_register(&ao_lco_cmds[0]);
+#endif
+}
diff --git a/src/telelco-v0.2/ao_lco.h b/src/telelco-v0.2/ao_lco.h
new file mode 100644 (file)
index 0000000..253f970
--- /dev/null
@@ -0,0 +1,24 @@
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_LCO_H_
+#define _AO_LCO_H_
+
+void
+ao_lco_init(void);
+
+#endif /* _AO_LCO_H_ */
diff --git a/src/telelco-v0.2/ao_pins.h b/src/telelco-v0.2/ao_pins.h
new file mode 100644 (file)
index 0000000..0a09cf7
--- /dev/null
@@ -0,0 +1,271 @@
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+/* 8MHz High speed external crystal */
+#define AO_HSE                 8000000
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL              12
+#define AO_RCC_CFGR_PLLMUL     (STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz (no need to go faster than CPU) */
+#define AO_PLLDIV              3
+#define AO_RCC_CFGR_PLLDIV     (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHz (CPU clock) */
+#define AO_AHB_PRESCALER       1
+#define AO_RCC_CFGR_HPRE_DIV   STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at 16MHz (HCLK/2) */
+#define AO_APB1_PRESCALER      2
+#define AO_RCC_CFGR_PPRE1_DIV  STM_RCC_CFGR_PPRE2_DIV_2
+
+/* Run APB2 at 16MHz (HCLK/2) */
+#define AO_APB2_PRESCALER      2
+#define AO_RCC_CFGR_PPRE2_DIV  STM_RCC_CFGR_PPRE2_DIV_2
+
+#define HAS_EEPROM             1
+#define USE_INTERNAL_FLASH     1
+#define HAS_USB                        1
+#define HAS_BEEP               1
+#define HAS_RADIO              1
+#define HAS_TELEMETRY          0
+#define HAS_AES                        1
+
+#define HAS_SPI_1              0
+#define SPI_1_PA5_PA6_PA7      0
+#define SPI_1_PB3_PB4_PB5      0
+#define SPI_1_PE13_PE14_PE15   0
+
+#define HAS_SPI_2              1       /* CC1120 */
+#define SPI_2_PB13_PB14_PB15   0
+#define SPI_2_PD1_PD3_PD4      1
+#define SPI_2_GPIO             (&stm_gpiod)
+#define SPI_2_SCK              1
+#define SPI_2_MISO             3
+#define SPI_2_MOSI             4
+#define SPI_2_OSPEEDR          STM_OSPEEDR_10MHz
+
+#define HAS_I2C_1              0
+
+#define HAS_I2C_2              0
+
+#define PACKET_HAS_SLAVE       0
+#define PACKET_HAS_MASTER      0
+
+/*
+ * Radio is a cc1120 connected via SPI
+ */
+
+#define AO_RADIO_CAL_DEFAULT   0x6ca333
+
+#define AO_FEC_DEBUG           0
+#define AO_CC1120_SPI_CS_PORT  (&stm_gpiod)
+#define AO_CC1120_SPI_CS_PIN   0
+#define AO_CC1120_SPI_BUS      AO_SPI_2_PD1_PD3_PD4
+#define AO_CC1120_SPI          stm_spi2
+
+#define AO_CC1120_INT_PORT             (&stm_gpioc)
+#define AO_CC1120_INT_PIN              (15)
+#define AO_CC1120_MCU_WAKEUP_PORT      (&stm_gpiod)
+#define AO_CC1120_MCU_WAKEUP_PIN       (2)
+
+#define AO_CC1120_INT_GPIO     2
+#define AO_CC1120_INT_GPIO_IOCFG       CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO    3
+#define AO_CC1120_MARC_GPIO_IOCFG      CC1120_IOCFG3
+
+
+#define LOW_LEVEL_DEBUG                0
+
+#define LED_PORT_ENABLE                STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT               (&stm_gpioc)
+#define LED_PIN_RED            7
+#define LED_PIN_AMBER          8
+#define LED_PIN_GREEN          9
+#define LED_PIN_CONTINUITY_3   10
+#define LED_PIN_CONTINUITY_2   11
+#define LED_PIN_CONTINUITY_1   12
+#define LED_PIN_CONTINUITY_0   13
+#define LED_PIN_REMOTE_ARM     14
+#define AO_LED_RED             (1 << LED_PIN_RED)
+#define AO_LED_AMBER           (1 << LED_PIN_AMBER)
+#define AO_LED_GREEN           (1 << LED_PIN_GREEN)
+#define AO_LED_CONTINUITY_3    (1 << LED_PIN_CONTINUITY_3)
+#define AO_LED_CONTINUITY_2    (1 << LED_PIN_CONTINUITY_2)
+#define AO_LED_CONTINUITY_1    (1 << LED_PIN_CONTINUITY_1)
+#define AO_LED_CONTINUITY_0    (1 << LED_PIN_CONTINUITY_0)
+#define AO_LED_RX              AO_LED_RED
+#define AO_LED_TX              AO_LED_GREEN
+
+#define AO_LED_CONTINUITY_NUM  4
+
+#define AO_LED_REMOTE_ARM      (1 << LED_PIN_REMOTE_ARM)
+
+#define LEDS_AVAILABLE         (AO_LED_RED |           \
+                                AO_LED_AMBER |         \
+                                AO_LED_GREEN |         \
+                                AO_LED_CONTINUITY_3 |  \
+                                AO_LED_CONTINUITY_2 |  \
+                                AO_LED_CONTINUITY_1 |  \
+                                AO_LED_CONTINUITY_0 |  \
+                                AO_LED_REMOTE_ARM)
+
+/* LCD displays */
+
+#define LCD_DEBUG              0
+#define SEVEN_SEGMENT_DEBUG    0
+
+#define AO_LCD_STM_SEG_ENABLED_0 (             \
+               (1 << 0) | /* PA1 */            \
+               (1 << 1) | /* PA2 */            \
+               (1 << 2) | /* PA3 */            \
+               (1 << 3) | /* PA6 */            \
+               (1 << 4) | /* PA7 */            \
+               (1 << 5) | /* PB0 */            \
+               (1 << 6) | /* PB1 */            \
+               (1 << 7) | /* PB3 */            \
+               (1 << 8) | /* PB4 */            \
+               (1 << 9) | /* PB5 */            \
+               (1 << 10) | /* PB10 */          \
+               (1 << 11) | /* PB11 */          \
+               (1 << 12) | /* PB12 */          \
+               (1 << 13) | /* PB13 */          \
+               (1 << 14) | /* PB14 */          \
+               (1 << 15) | /* PB15 */          \
+               (1 << 16) | /* PB8 */           \
+               (1 << 17) | /* PA15 */          \
+               (1 << 18) | /* PC0 */           \
+               (1 << 19) | /* PC1 */           \
+               (1 << 20) | /* PC2 */           \
+               (1 << 21) | /* PC3 */           \
+               (1 << 22) | /* PC4 */           \
+               (1 << 23) | /* PC5 */           \
+               (0 << 24) | /* PC6 */           \
+               (0 << 25) | /* PC7 */           \
+               (0 << 26) | /* PC8 */           \
+               (0 << 27) | /* PC9 */           \
+               (0 << 28) | /* PC10 or PD8 */   \
+               (0 << 29) | /* PC11 or PD9 */   \
+               (0 << 30) | /* PC12 or PD10 */  \
+               (0 << 31))  /* PD2 or PD11 */
+
+#define AO_LCD_STM_SEG_ENABLED_1 (             \
+               (0 << 0) | /* PD12 */           \
+               (0 << 1) | /* PD13 */           \
+               (0 << 2) | /* PD14 */           \
+               (0 << 3) | /* PD15 */           \
+               (0 << 4) | /* PE0 */            \
+               (0 << 5) | /* PE1 */            \
+               (0 << 6) | /* PE2 */            \
+               (0 << 7))  /* PE3 */
+
+#define AO_LCD_STM_COM_ENABLED (               \
+               (1 << 0) | /* PA8 */            \
+               (0 << 1) | /* PA9 */            \
+               (0 << 2) | /* PA10 */           \
+               (0 << 3) | /* PB9 */            \
+               (0 << 4) | /* PC10 */           \
+               (0 << 5) | /* PC11 */           \
+               (0 << 6)) /* PC12 */
+
+#define AO_LCD_28_ON_C 0
+
+#define AO_LCD_DUTY    STM_LCD_CR_DUTY_STATIC
+
+#define AO_LCD_PER_DIGIT       1
+
+#define AO_LCD_DIGITS          3
+#define AO_LCD_SEGMENTS                8
+
+#define AO_SEGMENT_MAP {                       \
+               /* pad segments */              \
+               { 0, 14 },                      \
+               { 0, 13 },                      \
+               { 0, 15 },                      \
+               { 0, 17 },                      \
+               { 0, 16 },                      \
+               { 0, 8 },                       \
+               { 0, 9 },                       \
+               { 0, 7 },                       \
+               /* box1 segments */             \
+               { 0, 10 },                      \
+               { 0, 6 },                       \
+               { 0, 11 },                      \
+               { 0, 12 },                      \
+               { 0, 21 },                      \
+               { 0, 19 },                      \
+               { 0, 20 },                      \
+               { 0, 18 },                      \
+               /* box0 segments */             \
+               { 0, 22 },                      \
+               { 0, 4 },                       \
+               { 0, 23 },                      \
+               { 0, 5 },                       \
+               { 0, 3 },                       \
+               { 0, 1 },                       \
+               { 0, 2 },                       \
+               { 0, 0 },                       \
+}
+
+/*
+ * Use event queue for input devices
+ */
+
+#define AO_EVENT               1
+
+/*
+ * Knobs
+ */
+
+#define AO_QUADRATURE_COUNT    2
+#define AO_QUADRATURE_MODE     0
+
+#define AO_QUADRATURE_0_PORT   &stm_gpioe
+#define AO_QUADRATURE_0_A      3
+#define AO_QUADRATURE_0_B      2
+
+#define AO_QUADRATURE_PAD      0
+
+#define AO_QUADRATURE_1_PORT   &stm_gpioe
+#define AO_QUADRATURE_1_A      1
+#define AO_QUADRATURE_1_B      0
+
+#define AO_QUADRATURE_BOX      1
+
+/*
+ * Buttons
+ */
+
+#define AO_BUTTON_COUNT                2
+#define AO_BUTTON_MODE         AO_EXTI_MODE_PULL_UP
+
+#define AO_BUTTON_0_PORT       &stm_gpioe
+#define AO_BUTTON_0            4
+
+#define AO_BUTTON_ARM          0
+
+#define AO_BUTTON_1_PORT       &stm_gpioe
+#define AO_BUTTON_1            5
+
+#define AO_BUTTON_FIRE         1
+
+#endif /* _AO_PINS_H_ */
diff --git a/src/telelco-v0.2/ao_telelco.c b/src/telelco-v0.2/ao_telelco.c
new file mode 100644 (file)
index 0000000..66bf0ba
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * Copyright © 2011 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <ao.h>
+#include <ao_exti.h>
+#include <ao_packet.h>
+#include <ao_companion.h>
+#include <ao_profile.h>
+#include <ao_pyro.h>
+#include <ao_aes.h>
+#include <ao_seven_segment.h>
+#include <ao_quadrature.h>
+#include <ao_button.h>
+#include <ao_lco.h>
+#include <ao_lco_cmd.h>
+#include <ao_radio_cmac_cmd.h>
+
+int
+main(void)
+{
+       ao_clock_init();
+       
+       ao_led_init(LEDS_AVAILABLE);
+       ao_led_on(AO_LED_GREEN);
+       ao_task_init();
+
+       ao_timer_init();
+
+       ao_spi_init();
+       ao_dma_init();
+       ao_exti_init();
+
+       ao_beep_init();
+       ao_cmd_init();
+
+       ao_lcd_stm_init();
+       ao_seven_segment_init();
+       ao_quadrature_init();
+       ao_button_init();
+
+       ao_storage_init();
+       
+       ao_radio_init();
+
+       ao_usb_init();
+
+       ao_config_init();
+       
+       ao_lco_init();
+       ao_lco_cmd_init();
+//     ao_radio_cmac_cmd_init();
+       
+       ao_start_scheduler();
+       return 0;
+}
diff --git a/src/telelco-v0.2/flash-loader/Makefile b/src/telelco-v0.2/flash-loader/Makefile
new file mode 100644 (file)
index 0000000..679e61b
--- /dev/null
@@ -0,0 +1,8 @@
+#
+# AltOS flash loader build
+#
+#
+
+TOPDIR=../..
+HARDWARE=telelco-v0.2
+include $(TOPDIR)/stm/Makefile-flash.defs
diff --git a/src/telelco-v0.2/flash-loader/ao_pins.h b/src/telelco-v0.2/flash-loader/ao_pins.h
new file mode 100644 (file)
index 0000000..6c8ff7e
--- /dev/null
@@ -0,0 +1,34 @@
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+/* External crystal at 8MHz */
+#define AO_HSE         8000000
+
+#include <ao_flash_stm_pins.h>
+
+/* Arm switch. Press at power on to get boot loader */
+
+#define AO_BOOT_PIN            1
+#define AO_BOOT_APPLICATION_GPIO       stm_gpioe
+#define AO_BOOT_APPLICATION_PIN                4
+#define AO_BOOT_APPLICATION_VALUE      1
+#define AO_BOOT_APPLICATION_MODE       AO_EXTI_MODE_PULL_UP
+
+#endif /* _AO_PINS_H_ */