doc: add force-bootloader instructions for TeleGPS v1 and v2

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index d734f89828b5e093279b1b846ad622945799720d..0c75fdeed6c4edbb6e9256d1b596689d151425b3 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -128,6 +128,18 @@
                        the one on the other end of the row.
                        endif::easymini[]
 
                        the one on the other end of the row.
                        endif::easymini[]
 

+                       TeleGPS v1::
+
+                       Connect pin 32 on the CPU to ground.  Pin 32 is the
+                       right-most pin on the bottom edge of the CPU when the
+                       board is oriented with the USB and battery connectors
+                       to the right.
+
+                       TeleGPS v2::
+
+                       Connect together pins 1 and 5 of the Debug connector.
+                       Pin 1 is the pin with the square pad around the hole.
+

                        ifdef::telemetrum[]
                        TeleDongle v3::
 
                        ifdef::telemetrum[]
                        TeleDongle v3::