doc: Fix spelling error in updating-firmware section.

Thanks to Timothy Dixon for catching this (copy-and-pasted many times)
typo -- could sequentially -> count sequentially.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index 1999a9c77e6a2557458fc97aa07a5888d18d664b..b9216a2235288d58a8c50705d18b40a6b9b2101c 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -84,7 +84,7 @@
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -97,7 +97,7 @@
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -111,7 +111,7 @@
                        Connect pin 5 and pin 1 of the debug connector, which
                        is the six holes next to the beeper. Pin 1 can be
                        identified by the square pad around it, and then the
-                       pins could sequentially across the board, making Pin 5
+                       pins count sequentially across the board, making Pin 5
                        the one on the other end of the row.
                        endif::easytimer[]
 
@@ -120,7 +120,7 @@
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -134,7 +134,7 @@
                        Connect pin 6 and pin 1 of the debug connector, which
                        is the six holes next to the beeper. Pin 1 can be
                        identified by the square pad around it, and then the
-                       pins could sequentially across the board, making Pin 6
+                       pins count sequentially across the board, making Pin 6
                        the one on the other end of the row.
                        endif::easymini[]