doc: Rename telemini doc file from telemini-v1.0.inc to telemini.inc

This file now contains information on both TeleMini versions.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/doc/altusmetrum.txt b/doc/altusmetrum.txt
index 15fc28fc6bba760f54d1beb46f4200322cd7c5a9..48211eb81b0aa5d6c5bad08532fa99969a61d4b1 100644 (file)
--- a/doc/altusmetrum.txt
+++ b/doc/altusmetrum.txt
@@ -22,7 +22,7 @@
 
        include::telemetrum.raw[]
 
-       include::telemini-v1.0.raw[]
+       include::telemini.raw[]
 
        include::easymini-device.raw[]
 

diff --git a/doc/telemini-v1.0.inc b/doc/telemini-v1.0.inc
deleted file mode 100644 (file)
index e0d674f..0000000
--- a/doc/telemini-v1.0.inc
+++ /dev/null
@@ -1,93 +0,0 @@
-== TeleMini v1.0
-
-       .TeleMini v1.0 Board
-       image::telemini-v1-top.jpg[width="5.5in"]
-
-       TeleMini v1.0 is ½ inches by 1½ inches.  It was
-       designed to fit inside an 18mm air-frame tube, but using it in
-       a tube that small in diameter may require some creativity in
-       mounting and wiring to succeed!  Since there is no
-       accelerometer, TeleMini can be mounted in any convenient
-       orientation.  The default ¼ wave UHF wire antenna attached to
-       the center of one end of the board is about 7 inches long. Two
-       wires for the power switch are connected to holes in the
-       middle of the board. Screw terminals for the e-matches for
-       apogee and main ejection charges depart from the other end of
-       the board, meaning an ideal “simple” avionics bay for TeleMini
-       should have at least 9 inches of interior length.
-
-       === TeleMini v1.0 Screw Terminals
-
-               TeleMini v1.0 has four screw terminals on the end of the
-               board opposite the telemetry antenna. Two are for the apogee
-               and two are for main igniter circuits. There are also wires
-               soldered to the board for the power switch.  Using the
-               picture above and starting from the top for the terminals
-               and from the left for the power switch wires, the
-               connections are as follows:
-
-               .TeleMini v1.0 Screw Terminals
-               [options="header",grid="all",cols="2,3,10"]
-               |====
-               |Terminal #|Terminal Name|Description
-
-               |1
-               |Apogee -
-               |Apogee pyro channel connection to pyro circuit
-
-               |2
-               |Apogee +
-               |Apogee pyro channel common connection to battery +
-
-               |3
-               |Main -
-               |Main pyro channel connection to pyro circuit
-
-               |4
-               |Main +
-               |Main pyro channel common connection to battery +
-
-               |Left
-               |Switch Output
-               |Switch connection to flight computer
-
-               |Right
-               |Switch Input
-               |Switch connection to positive battery terminal
-               |====
-
-       === Using a Separate Pyro Battery with TeleMini v1.0
-
-               As described above, using an external pyro battery involves
-               connecting the negative battery terminal to the flight
-               computer ground, connecting the positive battery terminal to
-               one of the igniter leads and connecting the other igniter
-               lead to the per-channel pyro circuit connection. Because
-               there is no solid ground connection to use on TeleMini, this
-               is not recommended.
-
-               The only available ground connection on TeleMini v1.0 are
-               the two mounting holes next to the telemetry
-               antenna. Somehow connect a small piece of wire to one of
-               those holes and hook it to the negative pyro battery terminal.
-
-               Connecting the positive battery terminal to the pyro
-               charges must be done separate from TeleMini v1.0, by soldering
-               them together or using some other connector.
-
-               The other lead from each pyro charge is then inserted into
-               the appropriate per-pyro channel screw terminal (terminal 3 for the
-               Main charge, terminal 1 for the Apogee charge).
-
-       === Using an Active Switch with TeleMini v1.0
-
-               As explained above, an external active switch requires three
-               connections, one to the positive battery terminal, one to
-               the flight computer positive input and one to ground. Again,
-               because TeleMini doesn't have any good ground connection,
-               this is not recommended.
-
-               The positive battery terminal is available on the Right
-               power switch wire, the positive flight computer input is on
-               the left power switch wire. Hook a lead to either of the
-               mounting holes for a ground connection.