tie bringup scripts to Bdale's bench TeleDongle

diff --git a/ao-bringup/turnon_teledongle b/ao-bringup/turnon_teledongle
index 5145e9b0bafc0831a7c98d45a9f1834853ad64bb..320cd8ff147ff92fb2c0dc6672b3e0695d8cb3be 100755 (executable)
--- a/ao-bringup/turnon_teledongle
+++ b/ao-bringup/turnon_teledongle
@@ -31,18 +31,18 @@ read SERIAL
 
 echo $RAWLOAD
 
-$RAWLOAD -r ao_led_blink.ihx
+$RAWLOAD -D 100 -r ao_led_blink.ihx
 echo "LEDs should be blinking"
 sleep 5
 
-$RAWLOAD -r ao_radio_xmit.ihx
+$RAWLOAD -D 100 -r ao_radio_xmit.ihx
 echo -n "Generating RF carrier.  Please enter measured frequency: "
 read FREQ
 
 CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD --cal $CAL_VALUE /usr/share/altos/stable/teledongle-v0.2*.ihx $SERIAL
+$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/stable/teledongle-v0.2*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
 echo "Unplug and replug USB, cu to the board, confirm freq and record power"

diff --git a/ao-bringup/turnon_telemetrum b/ao-bringup/turnon_telemetrum
index e2fd7116e5e82a132ddd552172834b00fe012766..47835c589ad759d7042498fcd192de56945ec44f 100755 (executable)
--- a/ao-bringup/turnon_telemetrum
+++ b/ao-bringup/turnon_telemetrum
@@ -31,18 +31,18 @@ read SERIAL
 
 echo $RAWLOAD
 
-$RAWLOAD --device TeleDongle -r ao_led_blink.ihx
+$RAWLOAD --device 100 -r ao_led_blink.ihx
 echo "the red LED should be blinking"
 sleep 5
 
-$RAWLOAD --device TeleDongle -r ao_radio_xmit.ihx
+$RAWLOAD --device 100 -r ao_radio_xmit.ihx
 echo -n "Generating RF carrier.  Please enter measured frequency: "
 read FREQ
 
 CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD --device TeleDongle --cal $CAL_VALUE \
+$AOLOAD --device 100 --cal $CAL_VALUE \
        /usr/share/altos/stable/telemetrum-v1.1*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE