X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Ftelegps-v0.1%2Fao_pins.h;fp=src%2Ftelegps-v0.1%2Fao_pins.h;h=77b2373dad70ce31a6f1fa9891ac4e2235ecde3e;hp=0000000000000000000000000000000000000000;hb=50dd268a715224a01f8a6b481670a4ae6621cb28;hpb=548cf57d5a5ea323bbfc3605b44c23fc48dec96b diff --git a/src/telegps-v0.1/ao_pins.h b/src/telegps-v0.1/ao_pins.h new file mode 100644 index 00000000..77b2373d --- /dev/null +++ b/src/telegps-v0.1/ao_pins.h @@ -0,0 +1,158 @@ +/* + * Copyright © 2012 Keith Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +#define HAS_TASK_QUEUE 1 + +/* 8MHz High speed external crystal */ +#define AO_HSE 8000000 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +/* SYSCLK = 32MHz (no need to go faster than CPU) */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHz (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at 16MHz (HCLK/2) */ +#define AO_APB1_PRESCALER 2 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +/* Run APB2 at 16MHz (HCLK/2) */ +#define AO_APB2_PRESCALER 2 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +#define HAS_SERIAL_1 1 +#define USE_SERIAL_1_STDIN 0 +#define SERIAL_1_PB6_PB7 1 +#define SERIAL_1_PA9_PA10 0 + +#define HAS_SERIAL_2 1 +#define USE_SERIAL_2_STDIN 0 +#define SERIAL_2_PA2_PA3 1 +#define SERIAL_2_PD5_PD6 0 + +#define HAS_SERIAL_3 0 +#define USE_SERIAL_3_STDIN 0 +#define SERIAL_3_PB10_PB11 0 +#define SERIAL_3_PC10_PC11 1 +#define SERIAL_3_PD8_PD9 0 + +#define ao_gps_getchar ao_serial2_getchar +#define ao_gps_putchar ao_serial2_putchar +#define ao_gps_set_speed ao_serial2_set_speed +#define ao_gps_fifo (ao_stm_usart2.rx_fifo) + +#define HAS_EEPROM 0 +#define USE_INTERNAL_FLASH 0 +#define HAS_USB 1 +#define HAS_BEEP 0 +#define HAS_RADIO 0 +#define HAS_TELEMETRY 0 + +#define HAS_SPI_1 0 +#define SPI_1_PA5_PA6_PA7 0 +#define SPI_1_PB3_PB4_PB5 0 +#define SPI_1_PE13_PE14_PE15 0 + +#define HAS_SPI_2 1 +#define SPI_2_PB13_PB14_PB15 1 /* CC115L */ +#define SPI_2_PD1_PD3_PD4 0 +#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz + +#define SPI_2_PORT (&stm_gpiob) +#define SPI_2_SCK_PIN 13 +#define SPI_2_MISO_PIN 14 +#define SPI_2_MOSI_PIN 15 + +#define HAS_I2C_1 0 +#define I2C_1_PB8_PB9 1 + +#define HAS_I2C_2 0 +#define I2C_2_PB10_PB11 1 + +#define PACKET_HAS_SLAVE 0 +#define PACKET_HAS_MASTER 0 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN +#define LED_PORT_0 (&stm_gpioa) +#define LED_PORT_0_MASK (0xff) +#define LED_PORT_0_SHIFT 0 +#define LED_PIN_RED 0 +#define LED_PIN_GREEN 2 +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) + +#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN) + +#define HAS_GPS 0 +#define HAS_FLIGHT 0 +#define HAS_ADC 0 +#define HAS_LOG 0 + +/* + * Telemetry monitoring + */ +#define HAS_MONITOR 0 +#define LEGACY_MONITOR 0 +#define HAS_MONITOR_PUT 0 +#define AO_MONITOR_LED AO_LED_GREEN + +/* + * Radio (cc115) + */ + +/* gets pretty close to 434.550 */ + +#define AO_RADIO_CAL_DEFAULT 0x6ca333 + +#define AO_FEC_DEBUG 0 +#define AO_CC1120_SPI_CS_PORT (&stm_gpioa) +#define AO_CC1120_SPI_CS_PIN 0 +#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15 +#define AO_CC1120_SPI stm_spi2 + +#define AO_CC1120_INT_PORT (&stm_gpioc) +#define AO_CC1120_INT_PIN 13 + +#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioc) +#define AO_CC1120_MCU_WAKEUP_PIN (0) + +#define AO_CC1120_INT_GPIO 2 +#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2 + +#define AO_CC1120_MARC_GPIO 3 +#define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3 + +/* + * Profiling Viterbi decoding + */ + +#ifndef AO_PROFILE +#define AO_PROFILE 0 +#endif + +#endif /* _AO_PINS_H_ */