X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fmegametrum-v0.1%2Fao_pins.h;h=4c645871fe758d6f6159da4aa49e38ef2823e936;hp=5ae80ac518a61cb61230011a98baee55383082b3;hb=8c05f608c8f103649c1e5ec0d5742621e233af78;hpb=b49c751749dcd3e78991463c098f8d916f52179d

diff --git a/src/megametrum-v0.1/ao_pins.h b/src/megametrum-v0.1/ao_pins.h
index 5ae80ac5..4c645871 100644
--- a/src/megametrum-v0.1/ao_pins.h
+++ b/src/megametrum-v0.1/ao_pins.h
@@ -62,6 +62,7 @@
 #define ao_gps_getchar		ao_serial3_getchar
 #define ao_gps_putchar		ao_serial3_putchar
 #define ao_gps_set_speed	ao_serial3_set_speed
+#define ao_gps_fifo		(ao_stm_usart3.rx_fifo)
 
 #define HAS_EEPROM		1
 #define USE_INTERNAL_FLASH	0
@@ -69,15 +70,18 @@
 #define HAS_BEEP		1
 #define HAS_RADIO		1
 #define HAS_TELEMETRY		1
+#define HAS_APRS		1
 
 #define HAS_SPI_1		1
 #define SPI_1_PA5_PA6_PA7	1	/* Barometer */
 #define SPI_1_PB3_PB4_PB5	0
 #define SPI_1_PE13_PE14_PE15	1	/* Accelerometer */
+#define SPI_1_OSPEEDR		STM_OSPEEDR_10MHz
 
 #define HAS_SPI_2		1
 #define SPI_2_PB13_PB14_PB15	1	/* Flash, Companion */
 #define SPI_2_PD1_PD3_PD4	0
+#define SPI_2_OSPEEDR		STM_OSPEEDR_10MHz
 
 #define SPI_2_PORT		(&stm_gpiob)
 #define SPI_2_SCK_PIN		13
@@ -279,12 +283,21 @@ struct ao_adc {
 #define AO_CC1120_SPI_CS_PORT	(&stm_gpioc)
 #define AO_CC1120_SPI_CS_PIN	5
 #define AO_CC1120_SPI_BUS	AO_SPI_2_PB13_PB14_PB15
+#define AO_CC1120_SPI		stm_spi2
 
-#define AO_CC1120_INT_PORT	(&stm_gpioc)
-#define AO_CC1120_INT_PIN	14
+#define AO_CC1120_INT_PORT		(&stm_gpioc)
+#define AO_CC1120_INT_PIN		14
+#define AO_CC1120_MCU_WAKEUP_PORT	(&stm_gpioc)
+#define AO_CC1120_MCU_WAKEUP_PIN	(0)
 
 #define AO_CC1120_INT_GPIO	2
-#define HAS_BOOT_RADIO		1
+#define AO_CC1120_INT_GPIO_IOCFG	CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO	3
+#define AO_CC1120_MARC_GPIO_IOCFG	CC1120_IOCFG3
+
+
+#define HAS_BOOT_RADIO		0
 
 /*
  * Mag sensor (hmc5883)