X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fdrivers%2Fao_ms5607.c;h=077a40e6a02e6b4478e39b9923e021df99d1f00e;hp=4594f07ceeddfccd3311eb0b8e8ee077e13be89e;hb=5a55501660ebab3b858a48483c5df1cfb4e858e4;hpb=1541fc0bde71f503b1ae5757497e9e1e6d023111 diff --git a/src/drivers/ao_ms5607.c b/src/drivers/ao_ms5607.c index 4594f07c..077a40e6 100644 --- a/src/drivers/ao_ms5607.c +++ b/src/drivers/ao_ms5607.c @@ -16,20 +16,23 @@ */ #include -#include "ao_ms5607.h" +#include +#include -static struct ms5607_prom ms5607_prom; -static uint8_t ms5607_configured; +#if HAS_MS5607 || HAS_MS5611 + +static struct ao_ms5607_prom ms5607_prom; +static uint8_t ms5607_configured; static void ao_ms5607_start(void) { - ao_spi_get(AO_MS5607_SPI_INDEX); - stm_gpio_set(&AO_MS5607_CS_GPIO, AO_MS5607_CS, 0); + ao_spi_get(AO_MS5607_SPI_INDEX,AO_SPI_SPEED_FAST); + ao_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, AO_MS5607_CS, 0); } static void ao_ms5607_stop(void) { - stm_gpio_set(&AO_MS5607_CS_GPIO, AO_MS5607_CS, 1); + ao_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, AO_MS5607_CS, 1); ao_spi_put(AO_MS5607_SPI_INDEX); } @@ -50,7 +53,6 @@ ao_ms5607_crc(uint8_t *prom) uint8_t crc_byte = prom[15]; uint8_t cnt; uint16_t n_rem = 0; - uint16_t crc_read; uint8_t n_bit; prom[15] = 0; @@ -69,7 +71,7 @@ ao_ms5607_crc(uint8_t *prom) } static void -ao_ms5607_prom_read(struct ms5607_prom *prom) +ao_ms5607_prom_read(struct ao_ms5607_prom *prom) { uint8_t addr; uint8_t crc; @@ -85,8 +87,14 @@ ao_ms5607_prom_read(struct ms5607_prom *prom) r++; } crc = ao_ms5607_crc((uint8_t *) prom); - if (crc != (((uint8_t *) prom)[15] & 0xf)) - printf ("MS5607 PROM CRC error (computed %x actual %x)\n", crc, (((uint8_t *) prom)[15] & 0xf)); + if (crc != (((uint8_t *) prom)[15] & 0xf)) { +#if HAS_TASK + printf ("MS5607 PROM CRC error (computed %x actual %x)\n", + crc, (((uint8_t *) prom)[15] & 0xf)); + flush(); +#endif + ao_panic(AO_PANIC_SELF_TEST_MS5607); + } #if __BYTE_ORDER == __LITTLE_ENDIAN /* Byte swap */ @@ -98,7 +106,7 @@ ao_ms5607_prom_read(struct ms5607_prom *prom) #endif } -static void +void ao_ms5607_setup(void) { if (ms5607_configured) @@ -108,16 +116,40 @@ ao_ms5607_setup(void) ao_ms5607_prom_read(&ms5607_prom); } +static volatile uint8_t ao_ms5607_done; + +static void +ao_ms5607_isr(void) +{ + ao_exti_disable(AO_MS5607_MISO_PORT, AO_MS5607_MISO_PIN); + ao_ms5607_done = 1; + ao_wakeup((void *) &ao_ms5607_done); +} + static uint32_t -ao_ms5607_convert(uint8_t cmd) { +ao_ms5607_get_sample(uint8_t cmd) { uint8_t reply[3]; uint8_t read; + ao_ms5607_done = 0; + ao_ms5607_start(); ao_spi_send(&cmd, 1, AO_MS5607_SPI_INDEX); - ao_ms5607_stop(); - ao_delay(AO_MS_TO_TICKS(20)); + ao_exti_enable(AO_MS5607_MISO_PORT, AO_MS5607_MISO_PIN); + +#if AO_MS5607_PRIVATE_PINS + ao_spi_put(AO_MS5607_SPI_INDEX); +#endif + cli(); + while (!ao_ms5607_done) + ao_sleep((void *) &ao_ms5607_done); + sei(); +#if AO_MS5607_PRIVATE_PINS + stm_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, 1); +#else + ao_ms5607_stop(); +#endif ao_ms5607_start(); read = AO_MS5607_ADC_READ; @@ -131,69 +163,89 @@ ao_ms5607_convert(uint8_t cmd) { void ao_ms5607_sample(struct ao_ms5607_sample *sample) { - uint8_t addr; - uint32_t D1, D2; - int32_t dT; - int32_t TEMP; - int64_t OFF; - int64_t SENS; - int32_t P; + sample->pres = ao_ms5607_get_sample(AO_MS5607_CONVERT_D1_2048); + sample->temp = ao_ms5607_get_sample(AO_MS5607_CONVERT_D2_2048); +} - ao_ms5607_setup(); +#include "ao_ms5607_convert.c" - D2 = ao_ms5607_convert(AO_MS5607_CONVERT_D2_4096); - printf ("Conversion D2: %d\n", D2); - D1 = ao_ms5607_convert(AO_MS5607_CONVERT_D1_4096); - printf ("Conversion D1: %d\n", D1); - - dT = D2 - ((int32_t) ms5607_prom.tref << 8); - - TEMP = 2000 + (((int64_t) dT * ms5607_prom.tempsens) >> 23); - - OFF = ((int64_t) ms5607_prom.off << 17) + (((int64_t) ms5607_prom.tco * dT) >> 6); - - SENS = ((int64_t) ms5607_prom.sens << 16) + (((int64_t) ms5607_prom.tcs * dT) >> 7); - - if (TEMP < 2000) { - int32_t T2 = ((int64_t) dT * (int64_t) dT) >> 31; - int32_t TEMPM = TEMP - 2000; - int64_t OFF2 = (61 * (int64_t) TEMPM * (int64_t) TEMPM) >> 4; - int64_t SENS2 = 2 * (int64_t) TEMPM * (int64_t) TEMPM; - if (TEMP < 1500) { - int32_t TEMPP = TEMP + 1500; - int64_t TEMPP2 = TEMPP * TEMPP; - OFF2 = OFF2 + 15 * TEMPP2; - SENS2 = SENS2 + 8 * TEMPP2; - } - TEMP -= T2; - OFF -= OFF2; - SENS -= SENS2; +#if HAS_TASK +struct ao_ms5607_sample ao_ms5607_current; + +static void +ao_ms5607(void) +{ + ao_ms5607_setup(); + for (;;) + { + ao_ms5607_sample(&ao_ms5607_current); + ao_arch_critical( + AO_DATA_PRESENT(AO_DATA_MS5607); + AO_DATA_WAIT(); + ); } +} + +__xdata struct ao_task ao_ms5607_task; - P = ((((int64_t) D1 * SENS) >> 21) - OFF) >> 15; - sample->temp = TEMP; - sample->pres = P; +void +ao_ms5607_info(void) +{ + printf ("ms5607 reserved: %u\n", ms5607_prom.reserved); + printf ("ms5607 sens: %u\n", ms5607_prom.sens); + printf ("ms5607 off: %u\n", ms5607_prom.off); + printf ("ms5607 tcs: %u\n", ms5607_prom.tcs); + printf ("ms5607 tco: %u\n", ms5607_prom.tco); + printf ("ms5607 tref: %u\n", ms5607_prom.tref); + printf ("ms5607 tempsens: %u\n", ms5607_prom.tempsens); + printf ("ms5607 crc: %u\n", ms5607_prom.crc); } static void ao_ms5607_dump(void) { - struct ao_ms5607_sample sample; + struct ao_ms5607_value value; - ao_ms5607_sample(&sample); - printf ("Temperature: %d\n", sample.temp); - printf ("Pressure %d\n", sample.pres); + ao_ms5607_convert(&ao_ms5607_current, &value); + printf ("Pressure: %8u %8d\n", ao_ms5607_current.pres, value.pres); + printf ("Temperature: %8u %8d\n", ao_ms5607_current.temp, value.temp); + printf ("Altitude: %ld\n", ao_pa_to_altitude(value.pres)); } __code struct ao_cmds ao_ms5607_cmds[] = { - { ao_ms5607_dump, "p\0Display MS5607 data" }, + { ao_ms5607_dump, "B\0Display MS5607 data" }, { 0, NULL }, }; +#endif /* HAS_TASK */ void ao_ms5607_init(void) { ms5607_configured = 0; + ao_spi_init_cs(AO_MS5607_CS_PORT, (1 << AO_MS5607_CS_PIN)); + +#if HAS_TASK ao_cmd_register(&ao_ms5607_cmds[0]); - ao_spi_init_cs(AO_MS5607_CS_GPIO, (1 << AO_MS5607_CS)); + ao_add_task(&ao_ms5607_task, ao_ms5607, "ms5607"); +#endif + + /* Configure the MISO pin as an interrupt; when the + * conversion is complete, the MS5607 will raise this + * pin as a signal + */ + ao_exti_setup(AO_MS5607_MISO_PORT, + AO_MS5607_MISO_PIN, + AO_EXTI_MODE_RISING, + ao_ms5607_isr); + +#ifdef STM_MODER_ALTERNATE + /* Reset the pin from INPUT to ALTERNATE so that SPI works + * This needs an abstraction at some point... + */ + stm_moder_set(AO_MS5607_MISO_PORT, + AO_MS5607_MISO_PIN, + STM_MODER_ALTERNATE); +#endif } + +#endif