X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fdrivers%2Fao_cc115l.c;h=a67071d24d879c44e348bb8ecb5ff8831e624e9c;hp=cf61acfe9c4ae45a6def0d88caf05c8d3d0dac96;hb=1085ec5d57e0ed5d132f2bbdac1a0b6a32c0ab4a;hpb=f395bcaa620490954d4a42de9b4870bc12bedc91 diff --git a/src/drivers/ao_cc115l.c b/src/drivers/ao_cc115l.c index cf61acfe..a67071d2 100644 --- a/src/drivers/ao_cc115l.c +++ b/src/drivers/ao_cc115l.c @@ -3,7 +3,8 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of @@ -38,7 +39,7 @@ static uint8_t ao_radio_abort; /* radio operation should abort */ #define FOSC 26000000 -#define ao_radio_select() ao_spi_get_mask(AO_CC115L_SPI_CS_PORT,(1 << AO_CC115L_SPI_CS_PIN),AO_CC115L_SPI_BUS,AO_SPI_SPEED_1MHz) +#define ao_radio_select() ao_spi_get_mask(AO_CC115L_SPI_CS_PORT,(1 << AO_CC115L_SPI_CS_PIN),AO_CC115L_SPI_BUS,AO_SPI_SPEED_6MHz) #define ao_radio_deselect() ao_spi_put_mask(AO_CC115L_SPI_CS_PORT,(1 << AO_CC115L_SPI_CS_PIN),AO_CC115L_SPI_BUS) #define ao_radio_spi_send(d,l) ao_spi_send((d), (l), AO_CC115L_SPI_BUS) #define ao_radio_spi_send_fixed(d,l) ao_spi_send_fixed((d), (l), AO_CC115L_SPI_BUS) @@ -70,7 +71,7 @@ struct ao_cc115l_trace { const char *comment; }; -#define NUM_TRACE 256 +#define NUM_TRACE 32 static struct ao_cc115l_trace trace[NUM_TRACE]; static int trace_i; @@ -246,6 +247,8 @@ ao_radio_idle(void) } /* Flush any pending TX bytes */ ao_radio_strobe(CC115L_SFTX); + /* Make sure the RF calibration is current */ + ao_radio_strobe(CC115L_SCAL); } /* @@ -325,23 +328,22 @@ static const struct { static const uint16_t packet_setup[] = { CC115L_MDMCFG3, (PACKET_DRATE_M), - CC115L_MDMCFG2, (0x00 | - (CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | + CC115L_MDMCFG2, ((CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | (0 << CC115L_MDMCFG2_MANCHESTER_EN) | (CC115L_MDMCFG2_SYNC_MODE_16BITS << CC115L_MDMCFG2_SYNC_MODE)), }; /* - * RDF deviation is 5kHz + * RDF deviation is 3kHz * * fdev = fosc >> 17 * (8 + dev_m) << dev_e * - * 26e6 / (2 ** 17) * (8 + 4) * (2 ** 1) = 4761Hz + * 26e6 / (2 ** 17) * (8 + 7) * (2 ** 0) = 2975 */ -#define RDF_DEV_E 1 -#define RDF_DEV_M 4 +#define RDF_DEV_E 0 +#define RDF_DEV_M 7 /* * For our RDF beacon, set the symbol rate to 2kBaud (for a 1kHz tone) @@ -364,8 +366,7 @@ static const uint16_t rdf_setup[] = { CC115L_MDMCFG4, ((0xf << 4) | (RDF_DRATE_E << CC115L_MDMCFG4_DRATE_E)), CC115L_MDMCFG3, (RDF_DRATE_M), - CC115L_MDMCFG2, (0x00 | - (CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | + CC115L_MDMCFG2, ((CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | (0 << CC115L_MDMCFG2_MANCHESTER_EN) | (CC115L_MDMCFG2_SYNC_MODE_NONE << CC115L_MDMCFG2_SYNC_MODE)), }; @@ -401,8 +402,7 @@ static const uint16_t aprs_setup[] = { CC115L_MDMCFG4, ((0xf << 4) | (APRS_DRATE_E << CC115L_MDMCFG4_DRATE_E)), CC115L_MDMCFG3, (APRS_DRATE_M), - CC115L_MDMCFG2, (0x00 | - (CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | + CC115L_MDMCFG2, ((CC115L_MDMCFG2_MOD_FORMAT_GFSK << CC115L_MDMCFG2_MOD_FORMAT) | (0 << CC115L_MDMCFG2_MANCHESTER_EN) | (CC115L_MDMCFG2_SYNC_MODE_NONE << CC115L_MDMCFG2_SYNC_MODE)), }; @@ -491,16 +491,21 @@ static const uint16_t radio_setup[] = { AO_CC115L_DONE_INT_GPIO_IOCFG, CC115L_IOCFG_GPIO_CFG_PA_PD | (1 << CC115L_IOCFG_GPIO_INV), CC115L_FIFOTHR, 0x47, /* TX FIFO Thresholds */ - CC115L_MDMCFG1, (0x00 | - (CC115L_MDMCFG1_NUM_PREAMBLE_4 << CC115L_MDMCFG1_NUM_PREAMBLE) | - (1 << CC115L_MDMCFG1_CHANSPC_E)), + CC115L_MDMCFG1, /* Modem Configuration */ + ((CC115L_MDMCFG1_NUM_PREAMBLE_4 << CC115L_MDMCFG1_NUM_PREAMBLE) | + (1 << CC115L_MDMCFG1_CHANSPC_E)), CC115L_MDMCFG0, 248, /* Channel spacing M value (100kHz channels) */ + CC115L_MCSM1, 0x30, /* Main Radio Control State Machine Configuration */ CC115L_MCSM0, 0x38, /* Main Radio Control State Machine Configuration */ CC115L_RESERVED_0X20, 0xfb, /* Use setting from SmartRF Studio */ + CC115L_FREND0, 0x10, /* Front End TX Configuration */ CC115L_FSCAL3, 0xe9, /* Frequency Synthesizer Calibration */ CC115L_FSCAL2, 0x2a, /* Frequency Synthesizer Calibration */ CC115L_FSCAL1, 0x00, /* Frequency Synthesizer Calibration */ CC115L_FSCAL0, 0x1f, /* Frequency Synthesizer Calibration */ + CC115L_RESERVED_0X29, 0x59, /* RESERVED */ + CC115L_RESERVED_0X2A, 0x7f, /* RESERVED */ + CC115L_RESERVED_0X2B, 0x3f, /* RESERVED */ CC115L_TEST2, 0x81, /* Various Test Settings */ CC115L_TEST1, 0x35, /* Various Test Settings */ CC115L_TEST0, 0x09, /* Various Test Settings */ @@ -508,6 +513,18 @@ static const uint16_t radio_setup[] = { static uint8_t ao_radio_configured = 0; +#if HAS_RADIO_POWER +#define RADIO_POWER ao_config.radio_power +#else + +#if 0 +#define RADIO_POWER 0x03 /* -31.75dBm on the test board */ +#endif + +#define RADIO_POWER 0xc0 /* full power */ + +#endif + static void ao_radio_setup(void) { @@ -523,6 +540,8 @@ ao_radio_setup(void) ao_config_get(); + ao_radio_reg_write(CC115L_PA, RADIO_POWER); + ao_radio_strobe(CC115L_SCAL); ao_radio_configured = 1; @@ -553,6 +572,8 @@ ao_radio_get(void) ao_radio_reg_write(CC115L_FREQ1, ao_config.radio_setting >> 8); ao_radio_reg_write(CC115L_FREQ0, ao_config.radio_setting); last_radio_setting = ao_config.radio_setting; + /* Make sure the RF calibration is current */ + ao_radio_strobe(CC115L_SCAL); } if (ao_config.radio_rate != last_radio_rate) { ao_radio_mode &= ~AO_RADIO_MODE_BITS_PACKET_TX; @@ -666,23 +687,11 @@ ao_radio_rdf_abort(void) #define POWER_STEP 0x08 -#if HAS_RADIO_POWER -#define RADIO_POWER ao_config.radio_power -#else -#define RADIO_POWER 0xc0 -#endif - static void ao_radio_stx(void) { - uint8_t power; ao_radio_pa_on(); - ao_radio_reg_write(CC115L_PA, 0); ao_radio_strobe(CC115L_STX); - for (power = POWER_STEP; power < RADIO_POWER; power += POWER_STEP) - ao_radio_reg_write(CC115L_PA, power); - if (power != RADIO_POWER) - ao_radio_reg_write(CC115L_PA, RADIO_POWER); } static void