X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fdrivers%2Fao_cc1120.c;h=a26eccbc26d10a16b1719a12a612aeb0fa049dad;hp=35be54a46ffffa89e7e1b385d01d0b486c8e9a44;hb=93a9aa703a0173e13b327ed432e6d52e90ebfa1b;hpb=acff2f466031fd1a8533fc315411c3734a8bacc6

diff --git a/src/drivers/ao_cc1120.c b/src/drivers/ao_cc1120.c
index 35be54a4..a26eccbc 100644
--- a/src/drivers/ao_cc1120.c
+++ b/src/drivers/ao_cc1120.c
@@ -38,7 +38,7 @@ extern const uint32_t	ao_radio_cal;
 
 #define FOSC	32000000
 
-#define ao_radio_select()	ao_spi_get_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS,AO_SPI_SPEED_1MHz)
+#define ao_radio_select()	ao_spi_get_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS,AO_SPI_SPEED_4MHz)
 #define ao_radio_deselect()	ao_spi_put_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS)
 #define ao_radio_spi_send(d,l)	ao_spi_send((d), (l), AO_CC1120_SPI_BUS)
 #define ao_radio_spi_send_fixed(d,l) ao_spi_send_fixed((d), (l), AO_CC1120_SPI_BUS)
@@ -747,7 +747,7 @@ ao_radio_send(const void *d, uint8_t size)
 #define AO_RADIO_LOTS	64
 
 void
-ao_radio_send_lots(ao_radio_fill_func fill)
+ao_radio_send_aprs(ao_radio_fill_func fill)
 {
 	uint8_t	buf[AO_RADIO_LOTS], *b;
 	int	cnt;
@@ -834,8 +834,8 @@ ao_radio_rx_isr(void)
 {
 	uint8_t	d;
 
-	d = stm_spi2.dr;
-	stm_spi2.dr = 0;
+	d = AO_CC1120_SPI.dr;
+	AO_CC1120_SPI.dr = 0;
 	if (rx_ignore == 0) {
 		if (rx_data_cur >= rx_data_count)
 			ao_exti_disable(AO_CC1120_INT_PORT, AO_CC1120_INT_PIN);
@@ -924,10 +924,10 @@ ao_radio_recv(__xdata void *d, uint8_t size)
 	ao_radio_wake = 0;
 	ao_radio_mcu_wake = 0;
 
-	stm_spi2.cr2 = 0;
+	AO_CC1120_SPI.cr2 = 0;
 
 	/* clear any RXNE */
-	(void) stm_spi2.dr;
+	(void) AO_CC1120_SPI.dr;
 
 	/* Have the radio signal when the preamble quality goes high */
 	ao_radio_reg_write(AO_CC1120_INT_GPIO_IOCFG, CC1120_IOCFG_GPIO_CFG_PQT_REACHED);