X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fdrivers%2Fao_btm.c;h=04bf413890e349014f0448b12bbedfef892d1841;hp=8e7052cb413000059c259587282121b0c60d4474;hb=0686a7b8aec524d81bda4c572549a3a068ce0eed;hpb=3b133656df4698ceb7af5902711edf9253a29227

diff --git a/src/drivers/ao_btm.c b/src/drivers/ao_btm.c
index 8e7052cb..04bf4138 100644
--- a/src/drivers/ao_btm.c
+++ b/src/drivers/ao_btm.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -29,12 +30,12 @@
 #endif
 
 int8_t			ao_btm_stdio;
-__xdata uint8_t		ao_btm_connected;
+uint8_t		ao_btm_connected;
 
-#define BT_DEBUG 0
+#define BT_DEBUG 1
 
 #if BT_DEBUG
-__xdata char		ao_btm_buffer[256];
+char		ao_btm_buffer[256];
 uint16_t		ao_btm_ptr;
 char			ao_btm_dir;
 
@@ -75,6 +76,7 @@ ao_btm_dump(void)
 {
 	int i;
 	char c;
+	uint16_t r;
 
 	for (i = 0; i < ao_btm_ptr; i++) {
 		c = ao_btm_buffer[i];
@@ -84,8 +86,8 @@ ao_btm_dump(void)
 			putchar(ao_btm_buffer[i]);
 	}
 	putchar('\n');
-	ao_cmd_decimal();
-	if (ao_cmd_status == ao_cmd_success && ao_cmd_lex_i)
+	r = ao_cmd_decimal();
+	if (ao_cmd_status == ao_cmd_success && r)
 		ao_btm_ptr = 0;
 	ao_cmd_status = ao_cmd_success;
 }
@@ -93,13 +95,17 @@ ao_btm_dump(void)
 static void
 ao_btm_speed(void)
 {
-	ao_cmd_decimal();
-	if (ao_cmd_lex_u32 == 57600)
+	switch (ao_cmd_decimal()) {
+	case 57600:
 		ao_serial_btm_set_speed(AO_SERIAL_SPEED_57600);
-	else if (ao_cmd_lex_u32 == 19200)
+		break;
+	case 19200:
 		ao_serial_btm_set_speed(AO_SERIAL_SPEED_19200);
-	else
+		break;
+	default:
 		ao_cmd_status = ao_cmd_syntax_error;
+		break;
+	}
 }
 
 static uint8_t	ao_btm_enable;
@@ -136,7 +142,7 @@ ao_btm_send(void)
 	ao_wakeup((void *) &ao_serial_btm_rx_fifo);
 }
 
-__code struct ao_cmds ao_btm_cmds[] = {
+const struct ao_cmds ao_btm_cmds[] = {
 	{ ao_btm_dump,		"d\0Dump btm buffer." },
 	{ ao_btm_speed,		"s <19200,57600>\0Set btm serial speed." },
 	{ ao_btm_send,		"S\0BTM interactive mode. ~ to exit." },
@@ -152,7 +158,7 @@ __code struct ao_cmds ao_btm_cmds[] = {
 #endif
 
 #define AO_BTM_MAX_REPLY	16
-__xdata char		ao_btm_reply[AO_BTM_MAX_REPLY];
+char		ao_btm_reply[AO_BTM_MAX_REPLY];
 
 /*
  * Read one bluetooth character.
@@ -251,7 +257,7 @@ ao_btm_wait_reply(void)
 }
 
 void
-ao_btm_string(__code char *cmd)
+ao_btm_string(const char *cmd)
 {
 	char	c;
 
@@ -260,7 +266,7 @@ ao_btm_string(__code char *cmd)
 }
 
 uint8_t
-ao_btm_cmd(__code char *cmd)
+ao_btm_cmd(const char *cmd)
 {
 	ao_btm_drain();
 
@@ -341,7 +347,7 @@ ao_btm_check_link()
 		);
 #else
 	ao_arch_block_interrupts();
-	if (ao_gpio_get(AO_BTM_INT_PORT, AO_BTM_INT_PIN, AO_BTM_INT) == 0) {
+	if (ao_gpio_get(AO_BTM_INT_PORT, AO_BTM_INT_PIN) == 0) {
 		ao_btm_connected = 1;
 	} else {
 		ao_btm_connected = 0;
@@ -350,7 +356,7 @@ ao_btm_check_link()
 #endif
 }
 
-__xdata struct ao_task ao_btm_task;
+struct ao_task ao_btm_task;
 
 /*
  * A thread to initialize the bluetooth device and
@@ -449,7 +455,7 @@ ao_btm_init (void)
 	ao_serial_btm_set_speed(AO_SERIAL_SPEED_19200);
 
 #ifdef AO_BTM_RESET_PORT
-	ao_enable_output(AO_BTM_RESET_PORT,AO_BTM_RESET_PIN,AO_BTM_RESET,0);
+	ao_enable_output(AO_BTM_RESET_PORT,AO_BTM_RESET_PIN,0);
 #endif
 
 #ifdef AO_BTM_INT_PORT