X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fcore%2Fao_flight.c;h=463ff4a2974b38e045fb2214ca9bc163cd490d28;hp=240b348a999e7207963d7274d38a01d0719490a7;hb=ee4279613b4757453d0d8f8afc06037c61eeb520;hpb=08143a922fe27bc50a19924f46538f9476ab5fd1

diff --git a/src/core/ao_flight.c b/src/core/ao_flight.c
index 240b348a..463ff4a2 100644
--- a/src/core/ao_flight.c
+++ b/src/core/ao_flight.c
@@ -46,6 +46,11 @@ __pdata enum ao_flight_state	ao_flight_state;	/* current flight state */
 __pdata uint16_t		ao_boost_tick;		/* time of launch detect */
 __pdata uint16_t		ao_motor_number;	/* number of motors burned so far */
 
+#if HAS_IMU
+/* Any sensor can set this to mark the flight computer as 'broken' */
+__xdata uint8_t			ao_sensor_errors;
+#endif
+
 /*
  * track min/max data over a long interval to detect
  * resting
@@ -99,6 +104,9 @@ ao_flight(void)
 			    ao_config.accel_minus_g == 0 ||
 			    ao_ground_accel < ao_config.accel_plus_g - ACCEL_NOSE_UP ||
 			    ao_ground_accel > ao_config.accel_minus_g + ACCEL_NOSE_UP ||
+#if HAS_IMU
+			    ao_sensor_errors ||
+#endif
 			    ao_ground_height < -1000 ||
 			    ao_ground_height > 7000)
 			{
@@ -364,6 +372,18 @@ ao_flight(void)
 				ao_interval_end = ao_sample_tick + AO_INTERVAL_TICKS;
 			}
 			break;
+#if HAS_FLIGHT_DEBUG
+		case ao_flight_test:
+#if HAS_GYRO
+			printf ("angle %4d pitch %7d yaw %7d roll %7d\n",
+				ao_sample_orient,
+				((ao_sample_pitch << 9) - ao_ground_pitch) >> 9,
+				((ao_sample_yaw << 9) - ao_ground_yaw) >> 9,
+				((ao_sample_roll << 9) - ao_ground_roll) >> 9);
+#endif
+			flush();
+			break;
+#endif /* HAS_FLIGHT_DEBUG */
 		default:
 			break;
 		}
@@ -414,8 +434,17 @@ ao_flight_dump(void)
 	printf ("  error_avg   %d\n", ao_error_h_sq_avg);
 }
 
+static void
+ao_gyro_test(void)
+{
+	ao_flight_state = ao_flight_test;
+	ao_getchar();
+	ao_flight_state = ao_flight_idle;
+}
+
 __code struct ao_cmds ao_flight_cmds[] = {
 	{ ao_flight_dump, 	"F\0Dump flight status" },
+	{ ao_gyro_test,		"G\0Test gyro code" },
 	{ 0, NULL },
 };
 #endif