X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fao_btm.c;h=a9306c101f715c40b703e39900007c837abf3100;hp=c7024ed3b5fe605ac37d3989bd4024bfb58a57ba;hb=66bdf0e066bc0bb7a326a6c2a9c88b69e5c1be66;hpb=8db5c52f1c76a05020e4e0afbe4ea27485ad9f82 diff --git a/src/ao_btm.c b/src/ao_btm.c index c7024ed3..a9306c10 100644 --- a/src/ao_btm.c +++ b/src/ao_btm.c @@ -17,13 +17,23 @@ #include "ao.h" -uint8_t ao_btm_running; -uint8_t ao_btm_stdio; -__xdata uint8_t ao_btm_connected; -uint8_t ao_btm_chat; +#if BT_LINK_ON_P2 +#define BT_PICTL_ICON PICTL_P2ICON +#define BT_PIFG P2IFG +#define BT_PDIR P2DIR +#define BT_PINP P2INP +#define BT_IEN2_PIE IEN2_P2IE +#endif +#if BT_LINK_ON_P1 +#define BT_PICTL_ICON PICTL_P1ICON +#define BT_PIFG P1IFG +#define BT_PDIR P1DIR +#define BT_PINP P1INP +#define BT_IEN2_PIE IEN2_P1IE +#endif -__xdata char ao_btm_buffer[1024]; -int ao_btm_ptr; +int8_t ao_btm_stdio; +__xdata uint8_t ao_btm_connected; #define AO_BTM_MAX_REPLY 16 __xdata char ao_btm_reply[AO_BTM_MAX_REPLY]; @@ -46,8 +56,6 @@ ao_btm_get_line(void) while ((c = ao_serial_pollchar()) != AO_READ_AGAIN) { if (ao_btm_reply_len < sizeof (ao_btm_reply)) ao_btm_reply[ao_btm_reply_len++] = c; - if (ao_btm_ptr < sizeof (ao_btm_buffer)) - ao_btm_buffer[ao_btm_ptr++] = c; if (c == '\r' || c == '\n') goto done; } @@ -75,6 +83,9 @@ ao_btm_drain() ; } +/* + * Set the stdio echo for the bluetooth link + */ void ao_btm_echo(uint8_t echo) { @@ -82,53 +93,15 @@ ao_btm_echo(uint8_t echo) } /* - * A command line pre-processor to detect connect/disconnect messages - * and update the internal state + * Delay between command charaters; the BT module + * can't keep up with 57600 baud */ -uint8_t -ao_cmd_filter(void) -{ - ao_cmd_lex(); - while (ao_cmd_lex_c != '\n') { - if (ao_match_word("CONNECT")) { - ao_btm_connected = 1; - ao_btm_echo(1); - ao_wakeup(&ao_btm_connected); - return 1; - } - if (ao_match_word("DISCONNECT")) { - ao_btm_connected = 0; - ao_btm_echo(0); - ao_wakeup(&ao_btm_connected); - return 1; - } - if (ao_match_word("ERROR")) - return 1; - if (ao_match_word("OK")) - return 1; - ao_cmd_lex(); - } - ao_cmd_status = 0; - return !ao_btm_connected; -} - -/* - * A wrapper for ao_serial_pollchar that - * doesn't return any characters while we're - * initializing the bluetooth device - */ -char -ao_btm_pollchar(void) +void +ao_btm_putchar(char c) { - char c; - if (!ao_btm_running) - return AO_READ_AGAIN; - c = ao_serial_pollchar(); - if (c != AO_READ_AGAIN) - if (ao_btm_ptr < sizeof (ao_btm_buffer)) - ao_btm_buffer[ao_btm_ptr++] = c; - return c; + ao_serial_putchar(c); + ao_delay(1); } /* @@ -140,9 +113,9 @@ ao_btm_wait_reply(void) { for (;;) { ao_btm_get_line(); - if (!strcmp(ao_btm_reply, "OK")) + if (!strncmp(ao_btm_reply, "OK", 2)) return 1; - if (!strcmp(ao_btm_reply, "ERROR")) + if (!strncmp(ao_btm_reply, "ERROR", 5)) return -1; if (ao_btm_reply[0] == '\0') return 0; @@ -150,11 +123,50 @@ ao_btm_wait_reply(void) } void +ao_btm_string(__code char *cmd) +{ + char c; + + while (c = *cmd++) + ao_btm_putchar(c); +} + +uint8_t ao_btm_cmd(__code char *cmd) { - ao_cur_stdio = ao_btm_stdio; - printf(cmd); - ao_btm_wait_reply(); + ao_btm_drain(); + ao_btm_string(cmd); + return ao_btm_wait_reply(); +} + +uint8_t +ao_btm_set_name(void) +{ + char sn[8]; + char *s = sn + 8; + char c; + int n; + ao_btm_string("ATN=TeleBT-"); + *--s = '\0'; + *--s = '\r'; + n = ao_serial_number; + do { + *--s = '0' + n % 10; + } while (n /= 10); + while ((c = *s++)) + ao_btm_putchar(c); + return ao_btm_wait_reply(); +} + +uint8_t +ao_btm_try_speed(uint8_t speed) +{ + ao_serial_set_speed(speed); + ao_btm_drain(); + (void) ao_btm_cmd("\rATE0\rATQ0\r"); + if (ao_btm_cmd("AT\r") == 1) + return 1; + return 0; } /* @@ -164,48 +176,57 @@ ao_btm_cmd(__code char *cmd) void ao_btm(void) { - ao_serial_set_speed(AO_SERIAL_SPEED_19200); - ao_add_stdio(ao_btm_pollchar, - ao_serial_putchar, - NULL); - ao_btm_stdio = ao_num_stdios - 1; - ao_cur_stdio = ao_btm_stdio; - ao_btm_echo(0); - ao_btm_drain(); - ao_delay(AO_SEC_TO_TICKS(1)); - printf("+++"); - ao_btm_drain(); - ao_delay(AO_SEC_TO_TICKS(1)); - printf("\r"); - ao_btm_drain(); - ao_btm_cmd("ATQ0\r"); + /* + * Wait for the bluetooth device to boot + */ + ao_delay(AO_SEC_TO_TICKS(3)); + +#if BT_LINK_ON_P1 + if ((P1DIR & (1 << 6)) == 0) + ao_panic(AO_PANIC_BT); + if ((P1DIR & (1 << 7)) != 0) + ao_panic(AO_PANIC_BT); + if ((P0SEL & ((1 << 5) | (1 << 4) | (1 << 3) | (1 << 2))) != + ((1 << 5) | (1 << 4) | (1 << 3) | (1 << 2))) + ao_panic(AO_PANIC_BT); +#endif +#if HAS_BEEP + ao_beep_for(AO_BEEP_MID, AO_MS_TO_TICKS(200)); +#endif + + /* + * The first time we connect, the BTM-180 comes up at 19200 baud. + * After that, it will remember and come up at 57600 baud. So, see + * if it is already running at 57600 baud, and if that doesn't work + * then tell it to switch to 57600 from 19200 baud. + */ + while (!ao_btm_try_speed(AO_SERIAL_SPEED_57600)) { + ao_delay(AO_SEC_TO_TICKS(1)); + if (ao_btm_try_speed(AO_SERIAL_SPEED_19200)) + ao_btm_cmd("ATL4\r"); + ao_delay(AO_SEC_TO_TICKS(1)); + } + + /* Disable echo */ ao_btm_cmd("ATE0\r"); - ao_btm_cmd("ATH\r"); - ao_delay(AO_SEC_TO_TICKS(1)); - ao_btm_cmd("ATC0\r"); - ao_btm_cmd("ATL4\r"); - ao_serial_set_speed(AO_SERIAL_SPEED_57600); - ao_btm_drain(); - printf("ATN=TeleBT-%d\r", ao_serial_number); - ao_btm_wait_reply(); - ao_btm_running = 1; + + /* Enable flow control */ + ao_btm_cmd("ATC1\r"); + + /* Set the reported name to something we can find on the host */ + ao_btm_set_name(); + + /* Turn off status reporting */ + ao_btm_cmd("ATQ1\r"); + + ao_btm_stdio = ao_add_stdio(ao_serial_pollchar, + ao_serial_putchar, + NULL); + ao_btm_echo(0); + for (;;) { - while (!ao_btm_connected && !ao_btm_chat) + while (!ao_btm_connected) ao_sleep(&ao_btm_connected); - if (ao_btm_chat) { - ao_btm_running = 0; - while (ao_btm_chat) { - char c; - c = ao_serial_pollchar(); - if (c != AO_READ_AGAIN) - ao_usb_putchar(c); - else { - ao_usb_flush(); - ao_sleep(&ao_usart1_rx_fifo); - } - } - ao_btm_running = 1; - } while (ao_btm_connected) { ao_led_for(AO_LED_GREEN, AO_MS_TO_TICKS(20)); ao_delay(AO_SEC_TO_TICKS(3)); @@ -215,53 +236,76 @@ ao_btm(void) __xdata struct ao_task ao_btm_task; -/* - * Connect directly to the bluetooth device, mostly - * useful for testing - */ -static void -ao_btm_forward(void) +void +ao_btm_check_link() __critical { - char c; - - ao_btm_chat = 1; - ao_wakeup(&ao_btm_connected); - ao_usb_flush(); - while ((c = ao_usb_getchar()) != '~') { - if (c == '\n') c = '\r'; - ao_serial_putchar(c); - } - ao_btm_chat = 0; - while (!ao_btm_running) { - ao_wakeup(&ao_usart1_rx_fifo); - ao_delay(AO_MS_TO_TICKS(10)); + /* Check the pin and configure the interrupt detector to wait for the + * pin to flip the other way + */ + if (BT_LINK_PIN) { + ao_btm_connected = 0; + PICTL |= BT_PICTL_ICON; + } else { + ao_btm_connected = 1; + PICTL &= ~BT_PICTL_ICON; } } -/* - * Dump everything received from the bluetooth device during startup - */ -static void -ao_btm_dump(void) +void +ao_btm_isr(void) +#if BT_LINK_ON_P1 + __interrupt 15 +#endif { - int i; - - for (i = 0; i < ao_btm_ptr; i++) - putchar(ao_btm_buffer[i]); - putchar('\n'); +#if BT_LINK_ON_P1 + P1IF = 0; +#endif + if (BT_PIFG & (1 << BT_LINK_PIN_INDEX)) { + ao_btm_check_link(); + ao_wakeup(&ao_btm_connected); + } + BT_PIFG = 0; } -__code struct ao_cmds ao_btm_cmds[] = { - { ao_btm_forward, "B\0BTM serial link." }, - { ao_btm_dump, "d\0Dump btm buffer." }, - { 0, NULL }, -}; - void ao_btm_init (void) { ao_serial_init(); ao_serial_set_speed(AO_SERIAL_SPEED_19200); + +#if BT_LINK_ON_P1 + /* + * Configure ser reset line + */ + + P1_6 = 0; + P1DIR |= (1 << 6); +#endif + + /* + * Configure link status line + */ + + /* Set pin to input */ + BT_PDIR &= ~(1 << BT_LINK_PIN_INDEX); + + /* Set pin to tri-state */ + BT_PINP |= (1 << BT_LINK_PIN_INDEX); + + /* Enable interrupts */ + IEN2 |= BT_IEN2_PIE; + + /* Check current pin state */ + ao_btm_check_link(); + +#if BT_LINK_ON_P2 + /* Eable the pin interrupt */ + PICTL |= PICTL_P2IEN; +#endif +#if BT_LINK_ON_P1 + /* Enable pin interrupt */ + P1IEN |= (1 << BT_LINK_PIN_INDEX); +#endif + ao_add_task(&ao_btm_task, ao_btm, "bt"); - ao_cmd_register(&ao_btm_cmds[0]); }