X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fao_btm.c;h=44155ec142aa934863daa384500726f503a3af09;hp=491e4be3b6a367078d19213d4c9daf8521ceebd9;hb=64860be02b3efa6f784a259249cfa6d14545fbd3;hpb=7f5c9986dfa2d130b6c8c14308638cce49391a6e

diff --git a/src/ao_btm.c b/src/ao_btm.c
index 491e4be3..44155ec1 100644
--- a/src/ao_btm.c
+++ b/src/ao_btm.c
@@ -17,13 +17,9 @@
 
 #include "ao.h"
 
-uint8_t			ao_btm_running;
 int8_t			ao_btm_stdio;
 __xdata uint8_t		ao_btm_connected;
 
-void
-ao_btm_putchar(char c);
-
 #define AO_BTM_MAX_REPLY	16
 __xdata char		ao_btm_reply[AO_BTM_MAX_REPLY];
 
@@ -81,32 +77,6 @@ ao_btm_echo(uint8_t echo)
 	ao_stdios[ao_btm_stdio].echo = echo;
 }
 
-/*
- * A command line pre-processor to detect connect/disconnect messages
- * and update the internal state
- */
-
-uint8_t
-ao_cmd_filter(void)
-{
-	if (ao_cur_stdio != ao_btm_stdio)
-		return 0;
-	ao_cmd_lex();
-	while (ao_cmd_lex_c != '\n') {
-		if (ao_match_word("CONNECT"))
-			return 1;
-		if (ao_match_word("DISCONNECT"))
-			return 1;
-		if (ao_match_word("ERROR"))
-			return 1;
-		if (ao_match_word("OK"))
-			return 1;
-		ao_cmd_lex();
-	}
-	ao_cmd_status = 0;
-	return 0;
-}
-
 /*
  * Delay between command charaters; the BT module
  * can't keep up with 57600 baud
@@ -196,6 +166,10 @@ ao_btm(void)
 	 */
 	ao_delay(AO_SEC_TO_TICKS(3));
 
+#if HAS_BEEP
+	ao_beep_for(AO_BEEP_MID, AO_MS_TO_TICKS(200));
+#endif
+
 	/*
 	 * The first time we connect, the BTM-180 comes up at 19200 baud.
 	 * After that, it will remember and come up at 57600 baud. So, see
@@ -226,7 +200,6 @@ ao_btm(void)
 				    NULL);
 	ao_btm_echo(0);
 
-	ao_btm_running = 1;
 	for (;;) {
 		while (!ao_btm_connected)
 			ao_sleep(&ao_btm_connected);
@@ -239,26 +212,50 @@ ao_btm(void)
 
 __xdata struct ao_task ao_btm_task;
 
+#if BT_LINK_ON_P2
+#define BT_PICTL_ICON	PICTL_P2ICON
+#define BT_PIFG		P2IFG
+#define BT_PDIR		P2DIR
+#define BT_PINP		P2INP
+#define BT_IEN2_PIE	IEN2_P2IE
+#endif
+#if BT_LINK_ON_P1
+#define BT_PICTL_ICON	PICTL_P1ICON
+#define BT_PIFG		P1IFG
+#define BT_PDIR		P1DIR
+#define BT_PINP		P1INP
+#define BT_IEN2_PIE	IEN2_P1IE
+#endif
+
 void
 ao_btm_check_link() __critical
 {
-	if (P2_1) {
+	/* Check the pin and configure the interrupt detector to wait for the
+	 * pin to flip the other way
+	 */
+	if (BT_LINK_PIN) {
 		ao_btm_connected = 0;
-		PICTL |= PICTL_P2ICON;
+		PICTL |= BT_PICTL_ICON;
 	} else {
 		ao_btm_connected = 1;
-		PICTL &= ~PICTL_P2ICON;
+		PICTL &= ~BT_PICTL_ICON;
 	}
 }
 
 void
 ao_btm_isr(void)
+#if BT_LINK_ON_P1
+	__interrupt 15
+#endif
 {
-	if (P2IFG & (1 << 1)) {
+#if BT_LINK_ON_P1
+	P1IF = 0;
+#endif
+	if (BT_PIFG & (1 << BT_LINK_PIN_INDEX)) {
 		ao_btm_check_link();
 		ao_wakeup(&ao_btm_connected);
 	}
-	P2IFG = 0;
+	BT_PIFG = 0;
 }
 
 void
@@ -267,18 +264,39 @@ ao_btm_init (void)
 	ao_serial_init();
 	ao_serial_set_speed(AO_SERIAL_SPEED_19200);
 
+#if BT_LINK_ON_P1
+	/*
+	 * Configure ser reset line
+	 */
+
+	P1_6 = 0;
+	P1DIR |= (1 << 6);
+#endif
+
 	/*
 	 * Configure link status line
 	 */
 
-	/* Set P2_1 to input, pull-down */
-	P2DIR &= ~(1 << 1);
-	P2INP |= P2INP_MDP2_1_TRISTATE;
+	/* Set pin to input */
+	BT_PDIR &= ~(1 << BT_LINK_PIN_INDEX);
 
-	/* Enable P2 interrupts */
-	IEN2 |= IEN2_P2IE;
+	/* Set pin to tri-state */
+	BT_PINP |= (1 << BT_LINK_PIN_INDEX);
+
+	/* Enable interrupts */
+	IEN2 |= BT_IEN2_PIE;
+
+	/* Check current pin state */
 	ao_btm_check_link();
+
+#if BT_LINK_ON_P2
+	/* Eable the pin interrupt */
 	PICTL |= PICTL_P2IEN;
+#endif
+#if BT_LINK_ON_P1
+	/* Enable pin interrupt */
+	P1IEN |= (1 << BT_LINK_PIN_INDEX);
+#endif
 
 	ao_add_task(&ao_btm_task, ao_btm, "bt");
 }