X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Fusage.inc;h=d010f398e76d926559dc5eb398217f074b0b88f3;hp=8349f86c52f3d7287661e1b0ed601c6eb2f59c1a;hb=71acc79f8e828d56296db282c72cf4492a8aa4f4;hpb=cbec66452ecd01bbd5aebf6f98443d5e0540f5d2

diff --git a/doc/usage.inc b/doc/usage.inc
index 8349f86c..d010f398 100644
--- a/doc/usage.inc
+++ b/doc/usage.inc
@@ -166,6 +166,17 @@
 		 controlling the flight or transmitting telemetry
 		 signals, but no record of the flight will be
 		 stored in on-board flash.
+
+		ifdef::easymega,telemega[]
+		|Additional Igniters
+		|four very short beeps
+		|Continuity indication for the four additional pyro
+		 channels on TeleMega and EasyMega. One high tone for
+		 no continuity, one low tone for continuity. These are
+		 produced after the continuity indicators for the two
+		 primary igniter channels.
+		endif::easymega,telemega[]
+
 		|====
 
 		ifdef::radio[]
@@ -227,14 +238,16 @@
 		ifdef::radio[disabled, and the radio goes into transmit-only mode.]
 		ifndef::radio[disabled.]
 		The only way to get out of this
-		mode is to power the flight computer down.
+		mode is to power the flight computer down. See below for how to get the flight
+		computer to come up in Flight/Pad mode at power on.
 
 		Idle::
 		The flight computer is ready to communicate over USB
 		ifdef::radio[and in packet mode over the radio.]
 		You can configure
 		the flight computer, download data or display
-		the current state.
+		the current state. See below for how to get the flight
+		computer to come up in Idle mode at power on.
 
 		ifdef::telemetrum,easymega,telemega[]
 		For flight computers with accelerometers (TeleMetrum,