X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=ee2f5e9a340b8fb83ed5876bd4141eb19470fdb3;hp=91aa58f2b3309c87cc00edc79da6362f61c211e3;hb=6d80b89c0bd82133dd5c93df8604f562ac49c19a;hpb=eb1c2bf5244840049c0a58e0ceecfcd9f5c290dd diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc index 91aa58f2..ee2f5e9a 100644 --- a/doc/updating-firmware.inc +++ b/doc/updating-firmware.inc @@ -27,10 +27,14 @@ http://www.altusmetrum.org/AltOS/ ifdef::telemega[] + === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware + endif::telemega[] ifndef::telemega[] + === Updating EasyMini Firmware + endif::telemega[] Self-programmable devices are reprogrammed by @@ -131,6 +135,12 @@ to the USB wires on the row of pins towards the center of the board. Ground is available on the capacitor next to it, on the end towards the USB wires. + + TeleBT v4:: + + Connect pin 30 on the CPU to ground. Pin 30 is the 6th + pin from the right on the top when the unit is oriented + such that the SMA is at the top. endif::telemetrum[] Once you've located the right pins: