X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=98e04cea6a8220b450f01e8a9235edad654134f8;hp=d28838290c0f7d7195e0f5e6ccd10f3de52004e7;hb=31f9ed231e63b214b405a141cabce3eb758e82e6;hpb=0686a7b8aec524d81bda4c572549a3a068ce0eed

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index d2883829..98e04cea 100644
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -27,10 +27,14 @@
 	http://www.altusmetrum.org/AltOS/
 
 	ifdef::telemega[]
+
 	=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+
 	endif::telemega[]
 	ifndef::telemega[]
+
 	=== Updating EasyMini Firmware
+
 	endif::telemega[]
 
 		Self-programmable devices are reprogrammed by
@@ -132,6 +136,13 @@
 			of the board. Ground is available on the capacitor
 			next to it, on the end towards the USB wires.
 			
+			TeleBT v3::
+
+			Connect pin 4 on the CPU to 3.3V, which can be done by
+			connecting pin 1 to pin 4.  Pin 1 is the left pin on
+			the lower edge of the chip when the unit is oriented
+			such taht the SMA is at the top.
+
 			TeleBT v4::
 
 			Connect pin 30 on the CPU to ground. Pin 30 is the 6th