X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Ftelemetrum.inc;h=3247db9553e214dd3d00c15966433380ba29788f;hp=fa7d202c19d9395b80b82f4bc75a469e8caa80d4;hb=946faa1541f69c6cf2759c13760fa9bc16e2298e;hpb=ce297f14ff54d230d01fb6dedaafca571e8b836b

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index fa7d202c..3247db95 100644
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -1,10 +1,10 @@
 == TeleMetrum
 
 	.TeleMetrum v2 Board
-	image::telemetrum-v2.0-th.jpg[width="5.5in"]
+	image::telemetrum-v2.0-th.jpg[width=400]
 
 	.TeleMetrum v1 Board
-	image::telemetrum-v1.1-thside.jpg[width="5.5in"]
+	image::telemetrum-v1.1-thside.jpg[width=400]
 
 	TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
 	fit inside coupler for 29mm air-frame tubing, but using it in a tube that
@@ -18,7 +18,7 @@
 	bay for TeleMetrum should have at least 10 inches of interior length.
 
 	There are two generations of the TeleMetrum design. The
-	major changes in the v2 generation are:
+	major changes after v1 generation are:
 
 	* uBlox GPS chip certified for altitude records
 
@@ -37,8 +37,9 @@
 		circuits. Using the picture above and starting from the top,
 		the terminals are as follows:
 
+		.TeleMetrum Screw Terminals
 		[options="header",grid="all",cols="2,3,10"]
-		|=========================
+		|===
 		|Terminal #|Terminal Name|Description
 		|1	|Switch Output	|Switch connection to flight computer
 		|2	|Switch Input	|Switch connection to positive battery terminal
@@ -46,7 +47,7 @@
 		|4	|Main -		|Main pyro channel connection to pyro circuit
 		|5	|Apogee +	|Apogee pyro channel common connection to battery +
 		|6	|Apogee -	|Apogee pyro channel connection to pyro circuit
-		|========================
+		|===
 
 	=== Using a Separate Pyro Battery with TeleMetrum