X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Ftelemetrum.inc;h=3247db9553e214dd3d00c15966433380ba29788f;hp=9562d99459b9e6794906dd25038660e3ac321bf3;hb=946faa1541f69c6cf2759c13760fa9bc16e2298e;hpb=8cf466d7a767a20387a8d9d6ec81ee00af3fe4a7

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index 9562d994..3247db95 100644
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -1,6 +1,10 @@
 == TeleMetrum
 
-	image::telemetrum-v1.1-thside.jpg[width="5.5in"]
+	.TeleMetrum v2 Board
+	image::telemetrum-v2.0-th.jpg[width=400]
+
+	.TeleMetrum v1 Board
+	image::telemetrum-v1.1-thside.jpg[width=400]
 
 	TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
 	fit inside coupler for 29mm air-frame tubing, but using it in a tube that
@@ -13,6 +17,18 @@
 	fin can end of the board, meaning an ideal “simple” avionics
 	bay for TeleMetrum should have at least 10 inches of interior length.
 
+	There are two generations of the TeleMetrum design. The
+	major changes after v1 generation are:
+
+	* uBlox GPS chip certified for altitude records
+
+	* Higher power radio (40mW vs 10mW)
+
+	* APRS support
+
+	Otherwise, they're the same size, with mounting holes and
+	screw terminals in the same position.
+
 	=== TeleMetrum Screw Terminals
 
 		TeleMetrum has six screw terminals on the end of the board
@@ -21,8 +37,9 @@
 		circuits. Using the picture above and starting from the top,
 		the terminals are as follows:
 
+		.TeleMetrum Screw Terminals
 		[options="header",grid="all",cols="2,3,10"]
-		|=========================
+		|===
 		|Terminal #|Terminal Name|Description
 		|1	|Switch Output	|Switch connection to flight computer
 		|2	|Switch Input	|Switch connection to positive battery terminal
@@ -30,7 +47,7 @@
 		|4	|Main -		|Main pyro channel connection to pyro circuit
 		|5	|Apogee +	|Apogee pyro channel common connection to battery +
 		|6	|Apogee -	|Apogee pyro channel connection to pyro circuit
-		|========================
+		|===
 
 	=== Using a Separate Pyro Battery with TeleMetrum