X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Frelease-notes-1.2.xsl;h=64ba46a90d2d269a4560d5b70a9cc1c576a56db9;hp=b254c7b5affeaaa236ac2d8e3eb69333c628c5f3;hb=e711c708b0d2c8d8c2d72e34a795ad8e9b5ab5de;hpb=2344ba81fa51215471099e56518112478bdf2e73

diff --git a/doc/release-notes-1.2.xsl b/doc/release-notes-1.2.xsl
index b254c7b5..64ba46a9 100644
--- a/doc/release-notes-1.2.xsl
+++ b/doc/release-notes-1.2.xsl
@@ -4,75 +4,24 @@
 
 <article>
   <para>
-    Version 1.2 is a minor release. It provides a few new features in AltosUI
-    and the AltOS firmware and fixes bugs.
+    Version 1.2 is a major release. It adds support for MicroPeak and
+    the MicroPeak USB adapter.
   </para>
   <para>
     AltOS Firmware Changes
     <itemizedlist>
-      <listitem>
-	In TeleMini recovery mode (when booted with the outer two
-	debug pins connected together), the radio parameters are also
-	set back to defaults (434.550MHz, N0CALL, factory radio cal).
-      </listitem>
-      <listitem>
-	Add support for reflashing the SkyTraq GPS chips. This
-	requires special host-side code which currently only exists
-	for Linux.
-      </listitem>
       <listitem>
 	Add MicroPeak support. This includes support for the ATtiny85
 	processor and adaptations to the core code to allow for
 	devices too small to run the multi-tasking scheduler.
       </listitem>
-      <listitem>
-	Correct Kalman filter model error covariance matrix. The
-	values used previously assumed continuous measurements instead
-	of discrete measurements.
-      </listitem>
     </itemizedlist>
   </para>
   <para>
-    AltosUI Changes
+    MicroPeak UI changes
     <itemizedlist>
       <listitem>
-	Handle missing GPS lock in 'Descent' tab. Previously, if the
-	GPS position of the pad was unknown, an exception would be
-	raised, breaking the Descent tab contents.
-      </listitem>
-      <listitem>
-	Add preliminary TeleMega support, including configuration,
-	data download and analysis.
-      </listitem>
-      <listitem>
-	Improve the graph, adding tool-tips to show values near the
-	cursor and making the displayed set of values configurable,
-	adding all of the flight data as options while leaving the
-	default settings alone so that the graph starts by showing
-	height, speed and acceleration.
-      </listitem>
-      <listitem>
-	Make the initial position of the AltosUI top level window
-	configurable. Along with this change, the other windows will
-	pop up at 'sensible' places now, instead of on top of one
-	another.
-      </listitem>
-      <listitem>
-	Add callsign to Monitor idle window and connecting
-	dialogs. This makes it clear which callsign is being used so
-	that the operator will be aware that it must match the flight
-	computer value or no communication will work.
-      </listitem>
-      <listitem>
-	When downloading flight data, display the block number so that
-	the user has some sense of progress. Unfortunately, we don't
-	know how many blocks will need to be downloaded, but at least
-	it isn't just sitting there doing nothing for a long time.
-      </listitem>
-      <listitem>
-	Add GPS data and a map to the graph window. This lets you see
-	a complete summary of the flight without needing to 'replay'
-	the whole thing.
+	Added this new application
       </listitem>
     </itemizedlist>
   </para>